20 Most Recent Kodak EasyShare Z760 Digital Camera - Page 3 Questions & Answers

No. the Z760's battery needs to be charged in the charger, not the camera. Connecting the camera to the computer merely drains the battery faster.

help

Just plug your camera to your computer. Once your camera is being detected, open my computer in your desktop. Right click the memory card icon and click format.

Depending on the method you're using, this can usually be remedied in one of two ways:

1. USB Cable: make sure your camera is turned off before connecting to the computer, and that the drivers for your camera have been loaded prior to connecting.
2. Memory Card: SD or MMC card readers are becoming more std. on computers, or inexpensive card readers are available to connect via USB.

If you are experiencing difficulties with either of these, this may involve a problem with your USB port or the drivers your computer is using. Sometimes it's as simple as removing the driver which isn't working properly and re-installing it again. In most cases, you will need to install the driver without the USB device connected, so that after you have successfully loaded the driver, the computer will recognize your USB device properly.

Once again, make sure your camera is turned OFF when you connect it to your computer with the USB cable (of course, your computer needs to be turned on). Then, turn the camera on, and you should see the computer recognize the device.

The flash does not charge separate from the rest of the camera. Try cleaning the flash sensor on the front of the camera or the flash led may be bad.

Secondly, this light functions as a flash sensor which is trying to tell you that you need to use a flash although you may have the flash manually turned off. looks like a bolt of lightning with a circle/slash through it.

file is stored as a .mov file you should be able to upload this .mov file to youtube or you may have to convert it to a .mpg file using a video converter program available at versiontracker.com

Mine does same thing, although when I close the little door, it still works fine.

THERE IS A PROBLEM IN THE CAMERA , CCD OR CHECK THE CCD CONTETS

SDHC cards will not work with this model...sorry

Hi, if you are using the KLIC-5000 battery try to clean the metal contacts on the battery. Try also to remove the battery of your camera dock your camera on the docking station then turn on the camera, if the camera will not turn on it means the charging mechanism of the dock is defective. Now if the camera turns on it means the battery is defective that is why you can charged it.

Check the edge of the SD card and see if the switch is in "Lock" position. Toggle it to 'Unlock' and try reformatting the card.

Check the user manual of the camera to see what type of SD card is needed. There are regular SD card and some are called the SDHC (Secure Digital High Capacity). Some devices could only work with the regular SD cards, If the camera could only support regular SD cards, make sure that your SD cards are not SDHC.

If everything's verified, try formatting the SD card using your computer to see make sure that the problem is coming from the camera.

If it's isolated with the camera, then, the SD slot of the camera could be bad.

Contacting the manufacturer would be the best thing to do after doing the things that I advised you. Have a second opinion from them or have them upgrade the firmware version of the camera. Upgrading the firmware is the best solution if the problem is related to the program.

Good luck and have a great day!

It could have something to do with the batteries/ battery compartment: 1. Make sure you will install a new or fully charged battery/batteries into your camera. Please use lithium batteries Ni-Mh or rechargeable Batteries (2000 M.Amp or higher). 2. Clean the battery contacts. a. Remove the battery/batteries and the memory card from your camera, then wipe the battery contacts with a soft, clean cloth. b. Reinstall the battery/batteries into your camera 3. Turn on your camera without the memory card. (If it works then it?s your memory card that is faulty)

Sounds like you have an incorrect - or corrupted - version of EasyShare installed. Uninstall the EasyShare software then go to the Kodak.com site to download and install the latest - version 8.

Your problem may be due to corrosion on the battery contacts inside the camera which can prevent the full power of the batteries from flowing to or from the camera. Try this free fix before you do anything else: remove the batteries and wipe the camera contacts firmly with a dry cloth (heavy corrosion may require cleaning with a wire brush, steel wool, or sandpaper). Remove any residue that may have fallen into the battery compartment during cleaning, then wipe both ends of the batteries and place them back in the camera and try the charge again. This cleaning clears the problem about 90% of the time. If it doesn't work for you, the dock may have a problem that requires professional repair.

Perform a clean uninstall:

1) uninstall the software from your OS
2) run the clear utility program www.kodak.com/go/clear
3) type "regedit" w/ out the quote on the run command, then delete hkey_local_machine\software\kodak
4) run disk cleanup
remove the ff:

• Downloaded Program Files
• Temporary Internet Files
• Recycle Bin
• Temporary Files

5) reinstall the software again at www.kodak.com/go/edl

Please readjust the ISO.
In order to find a pattern please experiment: For example: Try Different SCN (If you're experiencing this problem with your night pictures try and use SCN night, the logo shows a moon and a star, with or without Flash.

I hope it works out.

Check your camera specs, some of the Kodaks only can handle 4 G or 8G cards at most, see what the camera is built for

Use a card reader instead of your camera.

Your recommended Batt; http://wwwuk.kodak.com/global/en/service/batteries/batteryDigCamChart.jhtml?camera=Z760

If you have a dif. batt or there is fault w. the batt your batt is covered by the same warranty as you camara and the good thing is that you do not have to send the batt. back to the manufactorer.

Contact KODAK:
http://www.kodak.com/eknec/PageQuerier.jhtml?pq-path=14563&pq-locale=en_US&_requestid=3490

Do you have QuickTime Player on your computer?
In order to download:
www.apple,com

The video can be saved under your C drive, but Easyshare cannot play it without QuickTime.