20 Most Recent Kodak EasyShare V550 Digital Camera Questions & Answers

0helpful
1answer

Hola: Tengo una Kodak V530 que

Hola Aqu? esta un manual para su c?mara. Es en ingl?s pero espero que te puede ayudar https://manualsbrain.com/en/manuals/1041766/?page=49
10/27/2017 10:50:06 AM • Kodak EasyShare... • Answered on Oct 27, 2017
0helpful
1answer

Camera will not turn on

Need new battery.
12/13/2015 2:00:58 AM • Kodak EasyShare... • Answered on Dec 13, 2015
0helpful
3answers

Where can I get a Manual or User Guide?

just check this link- "http://support.en.kodak.com/app/answers/detail/a_id/18600/~/kodak-easyshare-v550-zoom-digital-camera%C2%A0%E2%80%94%C2%A0users-guide/selected/true"
7/5/2014 9:53:52 AM • Kodak EasyShare... • Answered on Jul 05, 2014
0helpful
1answer

Kodak Easyshare V550 LCD screen view shakes/vibrates but takes fine pictures.

you have a loose ccd on the back of the lens.
5/20/2014 10:04:43 PM • Kodak EasyShare... • Answered on May 20, 2014
0helpful
1answer

Unnatural colors and a grainy LCD display

Dear concern. It seems like that the lcd has been either burned out or has been hurt badly.. try checking it on another camera whether the result is same or not .. If the result is same then the manfufacturer has built-in lcd with low depth quality.
2/24/2014 10:14:32 AM • Kodak EasyShare... • Answered on Feb 24, 2014
0helpful
1answer

My camera turns on but then it shuts off

More often than you think the battery can cause this problem. Even when you did charge it just before use. The charger can indicate the battery is fully loaded, but still it won't have enough power to let the camera work properly. Please try charging the battery again, and again. Of you have a multimeter (or know someone who owns one) you could test the battery. It should have a few tenths of a gold more than is printed on the battery (my guess your battery reads 3,7 volt and should give 3,9 or more when you pull it out of the camera) Other reason ca be, there is something worn, like a lens that can't come out, because it got stuck (after a fall??)
1/4/2014 5:51:41 PM • Kodak EasyShare... • Answered on Jan 04, 2014
0helpful
1answer

Will not charge

I have a Kodak easy share V550.The flash will not flash.Battery problems?I have charged onernight
9/6/2013 6:51:26 PM • Kodak EasyShare... • Answered on Sep 06, 2013
0helpful
1answer

Can pics be retreived if accidentally deleated

If the pictures were on a memory card and you haven't done anything with the card since then, you may be able to recover at least some of the pictures. Do a Google search for "data recovery software" and select a program for your computer and operating system. Put the card into a card reader attached to your computer and run the program.
11/8/2012 4:21:28 AM • Kodak EasyShare... • Answered on Nov 08, 2012
0helpful
2answers

Turn on camera get error B03

THe issue of the camera shutting down and the lens Extending is an internal malfunction. UNited Camera Repair has been able to fix this, at least for me, they did. They replaced the main board and the camera worked when I got it back. Otherwise, if you dont want to spend the money, try installing a new firm ware.....

thank yoy hav a nice day
9/7/2011 6:33:30 PM • Kodak EasyShare... • Answered on Sep 07, 2011
0helpful
1answer

How does one fix error e45?

Hello

Thank you for using FIXYA!!!

This is a suggestion. If you do not feel comfortable trying it, you will need to take the unit to your nearest service centre. Feel free to let me know if you need any assistance.

The problem might be that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the probability is that you will have to get it fixed by a professional.

Use these at own risk as it may further damage the camera.

Firstly , try connecting your ac adapter or usb cable.

Try holding the shutter button while switching on the camera.

Look at the lens , and if some of the lens 'circles' is misaligned or not concentric then try wiggling it (while holding camera lens down).

Try gently pushing or pulling the lens when it extends but this is risky as it may cause the lens barrel to slip out of its guidance system.

Another way to do this is to place the camera lens down on a hard surface and then power it up. Be sure to use a soft cloth or something similar as to not scratch your lens or casing. Let the lens push the camera up and down a few times and sometimes the little resistance provided by the camera is enough to get things going again.

Try hitting your camera near the lens on the body with the soft tissue on the palm of your hand.

Other than that , I would take the camera to a repair centre for a evaluation to see if it would cost more to repair than to replace the camera.

If it is still under warranty I would suggest you take it in before trying any of these steps and remove any off-brand batteries or accessories as some stores are really fussy about warranty repairs on camera's with non-brand accessories.

You can also have a look at THIS link.

Hope the advise is useful. please do not hesitate to let me know if you need any further assistance. Also, please be so kind to let me know if you found this helpful.

Regards
Andrea
8/5/2011 11:57:21 AM • Kodak EasyShare... • Answered on Aug 05, 2011
0helpful
1answer

I am getting a "lens

Hello

Thank you for using FIXYA!!!

This is a suggestion. If you do not feel comfortable trying it, you will need to take the unit to your nearest service centre. Feel free to let me know if you need any assistance.

The problem might be that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the probability is that you will have to get it fixed by a professional.

Use these at own risk as it may further damage the camera.

Firstly , try connecting your ac adapter or usb cable.

Try holding the shutter button while switching on the camera.

Look at the lens , and if some of the lens 'circles' is misaligned or not concentric then try wiggling it (while holding camera lens down).

Try gently pushing or pulling the lens when it extends but this is risky as it may cause the lens barrel to slip out of its guidance system.

Another way to do this is to place the camera lens down on a hard surface and then power it up. Be sure to use a soft cloth or something similar as to not scratch your lens or casing. Let the lens push the camera up and down a few times and sometimes the little resistance provided by the camera is enough to get things going again.

Try hitting your camera near the lens on the body with the soft tissue on the palm of your hand.

Other than that , I would take the camera to a repair centre for a evaluation to see if it would cost more to repair than to replace the camera.

If it is still under warranty I would suggest you take it in before trying any of these steps and remove any off-brand batteries or accessories as some stores are really fussy about warranty repairs on camera's with non-brand accessories.

You can also have a look at THIS link.

Hope the advise is useful. please do not hesitate to let me know if you need any further assistance. Also, please be so kind to let me know if you found this helpful.

Regards
Andrea
3/22/2011 7:46:43 PM • Kodak EasyShare... • Answered on Mar 22, 2011
0helpful
1answer

EasyShare V550 Digital Camera: How do I change the language back to english...

Press the MENU button. Use up/down to select the Setup tab (three horizontal sliders) and press the OK button. Use up/down to select the fourteenth item.
3/15/2011 10:30:51 PM • Kodak EasyShare... • Answered on Mar 15, 2011
0helpful
1answer

First I had error e45

Hello

The problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the probability is that you will have to get it fixed by a professional.

Use these at own risk as it may further damage the camera.

Firstly , try connecting your ac adapter or usb cable.

Try holding the shutter button while switching on the camera.

Look at the lens , and if some of the lens 'circles' is misaligned or not concentric then try wiggling it (while holding camera lens down).

Try gently pushing or pulling the lens when it extends but this is risky as it may cause the lens barrel to slip out of its guidance system.

Another way to do this is to place the camera lens down on a hard surface and then power it up. Be sure to use a soft cloth or something similar as to not scratch your lens or casing. Let the lens push the camera up and down a few times and sometimes the little resistance provided by the camera is enough to get things going again.

Try hitting your camera near the lens on the body with the soft tissue on the palm of your hand.

Other than that , I would take the camera to a repair centre for a evaluation to see if it would cost more to repair than to replace the camera.

If it is still under warranty I would suggest you take it in before trying any of these steps and remove any off-brand batteries or accessories as some stores are really fussy about warranty repairs on camera's with non-brand accessories.

You can also have a look at THIS link.

Hope the advise is useful. please do not hesitate to let me know if you need any further assistance. Also, please be so kind to let me know if you found this helpful.

Regards
Andrea
1/25/2011 4:19:39 PM • Kodak EasyShare... • Answered on Jan 25, 2011
0helpful
1answer

ERROR N°E45 CAMARA KODAK V550

Hello

The problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the probability is that you will have to get it fixed by a professional.

Use these at own risk as it may further damage the camera.

Firstly , try connecting your ac adapter or usb cable.

Try holding the shutter button while switching on the camera.

Look at the lens , and if some of the lens 'circles' is misaligned or not concentric then try wiggling it (while holding camera lens down).

Try gently pushing or pulling the lens when it extends but this is risky as it may cause the lens barrel to slip out of its guidance system.

Another way to do this is to place the camera lens down on a hard surface and then power it up. Be sure to use a soft cloth or something similar as to not scratch your lens or casing. Let the lens push the camera up and down a few times and sometimes the little resistance provided by the camera is enough to get things going again.

Try hitting your camera near the lens on the body with the soft tissue on the palm of your hand.

Other than that , I would take the camera to a repair centre for a evaluation to see if it would cost more to repair than to replace the camera.

If it is still under warranty I would suggest you take it in before trying any of these steps and remove any off-brand batteries or accessories as some stores are really fussy about warranty repairs on camera's with non-brand accessories.

You can also have a look at THIS link.

Hope the advise is useful. please do not hesitate to let me know if you need any further assistance. Also, please be so kind to let me know if you found this helpful.

Regards
Andrea
1/22/2011 9:15:52 PM • Kodak EasyShare... • Answered on Jan 22, 2011
0helpful
1answer

I cannot format San disk

The DX6340 works with MMC and SD cards, not SDHC cards. You need to use cards 2GB and smaller with this camera.
1/19/2011 8:55:20 AM • Kodak EasyShare... • Answered on Jan 19, 2011
0helpful
1answer

Flash not working in any mode

Did you push the flash button on the top of the camera?
12/26/2010 10:39:51 PM • Kodak EasyShare... • Answered on Dec 26, 2010
Not finding what you are looking for?
Kodak EasyShare V550 Digital Camera Logo

92 questions posted

Ask a Question

Usually answered in minutes!

Top Kodak Cameras Experts

Ekse

Level 3 Expert

13435 Answers

Cindy Wells

Level 3 Expert

6394 Answers

Brad Brown

Level 3 Expert

18851 Answers

Are you a Kodak Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

EasyShare Kodak

  • EasyShare Kodak

Most Popular Question

get manual or user guide

  • Cameras
Loading...