20 Most Recent Kodak EasyShare DX7590 Digital Camera - Page 7 Questions & Answers

Move it back again. Did you do any editing in the computer ? If so, the camera will no longer recognise the images on the card.

I have a Z981 myself. I just set my camera as you did (to "A") but did not experience the issue you mention? Just to be clear, remember that setting the camera to "A" means "Aperture priority", meaning that you can control the lens aperture (with the "jog dial" on the top of the camera) and the camera will automatically set the shutter speed to create a proper exposure. "A" does NOT mean automatic exposure control. You must use "P" (Programmed) mode to make the camera make all the decisions about shutter speed and lens aperture. I am including a web link to the User Guide for the Z981. You might want to revisit the Guide to make sure you are using the correct settings for your pictures. BTW, I like my Z981 quite a bit, especially the zoom. I've taken some great pictures with it. http://resources.kodak.com/support/pdf/en/manuals/urg01118/Z981_xUG_GLB_en.pdf

Surely this information is included in the technical specifications at the rear (probably) of the camera manual ?

Sounds like your screen is toast and time to find a new camera. They are not cost-effective to replace on a lower-cost camera.

There is a little spring assembly in there that pops the card out when you press a button or something. But if the button is stuck or not working the card will always pop out! If you remove the spring that will do the trick - to remove card in future you use tweezers like I do with my Garmin! Does the trick and works fine!!!!!!!!!!

To unlock the card: Turn off the camera. Remove the card from the camera. Slide the tiny switch (on the side of the card) so that it's not in the Lock position.Aug 25, 2010

Camera LCD: "Memory card is protected (Reset switch on ...

support.en.kodak.com/.../camera-lcd%3A-memory-card-is-protected

A hanging diaphragm motor !!! or autofocus motor !!! dirt inside ? the first things that will have a time out that will not give a message in a display by simply budget cams I have no experience in photo digital cameras but i know that a lens will first autofocussing the picture and all, yes all arming course is timed to all electrical components. but if the motor of the focussing can have a problem but also the auto diaphragm motor could be i know for shure there will be the cause of failure to search , 20 years ago i have repaired video camcorders repaired and Samsung have had that same problem ,its a failure in timing shutt-off !! if you have warranty on it GO FOR IT . i think there are no people or hard to find to repair it under 60% of the replacement value. or it is above the replacement value marketing technical sollutions is trade-in rebate !!

Go to this link and download the pdf file that appears. You can download it to your desktop by clicking on the icon that looks like a piece of paper with a downward facing arrow in the upper right hand corner of the viewer. http://upload.cyfrowe.pl/cyfrowe/instrukcje/aparaty/kodak/instrukcja_kodak_C713_C813_CD703_en.pdf

Kodak has a "resources" link and you can probably find your manual there in downloadable PDF for free. You can also Google your make/model of camera and see if it shows up. I searched for this one as an example...below. Hope this helps. Mike [PDF] KODAK EASYSHARE CD82 Digital Camera resources.kodak.com/support/pdf/en/manuals/urg01070/CD82_xUG_GLB... KODAK EASYSHARE CD82 Digital Camera Extended user guide www.kodak.com For interactive tutorials: ... Use power-saving features (see Using the Setup tab, page 28).

Check your local professional camera repair service. Usually, the diagnosis is free or rolled into the fee to repair it. Otherwise, contact your camera's manufacturer's service and repair or warranty service. If your camera is past the warranty, they still will probably fix it or refer you to one of their authorized repair centers. Hope this helps. Mike

some pc virus inside. Just try to clean it with an antivirus.

Check the slider isn't set to lock so you cannot delete or alter SD card. It's on the edge of the SD card.
Move it as far as it will go in opposite direction to what it is now.