20 Most Recent LG BD690 Player Questions & Answers


download instruction
https://www.yumpu.com/en/document/view/12820357/urc-969-instruction-download-sansai

LG Televison &... | Answered 3 hours ago


What is a Sandia remote control?

Cannot find any reference to this make?

LG Televison &... | Answered 11 hours ago


Send it to an LG Service Centre. The picture you might be able to fix, but not the zero sound issue.

LG Televison &... | Answered Yesterday


Go to settings, wifi, enter username and password, connect to wifi.

LG Televison &... | Answered 3 days ago


Probably backlights blown or T-con board faulty!

LG Televison &... | Answered on May 24, 2020


I think that maybe the built in light has worn out and is not working anymore and the screen and the built in light needs to be replaced.

LG Televison &... | Answered on May 21, 2020


No signal from wherever you get your signal from? That sounds like a test screen.

Unplug it from the mains for 2 minutes. If it doesn't come back on, you need a service call.

LG Televison &... | Answered on May 20, 2020


Most have a limited number of times you can change before it stays in one region for good.

LG Televison &... | Answered on May 15, 2020


Backlight issues, either the led backlights or the T-con board.

LG Televison &... | Answered on May 13, 2020


Disconnect for the mains supply for 5 minutes. Plus back in and switch on from the set, not the remote. Does it work, Yes, great, you fixed it.

No? Take it into an LG Service Centre. They have the thousands of dollars of test equipment that is needed.

If you try to fix it yourself, it will all end in tears.

LG Televison &... | Answered on May 12, 2020


Transistors don't or rarely blow (overheat) for no reason and when one or more does fail it is best to assume it has done so because of an overload condition which can be caused by the current demand of subsequent circuits being too high or the bias being incorrect.

With the modern trend of DC coupling the various stages of a circuit, the bias or quiescent current and circuit gain is set by the component choice and circuit design, the bias for all stages ultimately being controlled by the adjustment of the first stage.

Age and environment causes many components to change value, not the least those components that set the bias. When this happens the quiescent current of the final stages can increase and cause heating.

When replacing a transistor it is important to realise the gain of the replacement is probably different to the original and so certain component values will need to be adjusted so the original performance is restored to the circuit and the transistor parameters aren't exceeded, finishing by checking and adjusting the quiescent current.

LG Televison &... | Answered on May 12, 2020


The problem is most likely in the power supply unit. There are components in it that have fixed lifespan. These components can be tested if you have the proper equipment, Due to the age of the unit and the fact that they are obsolete due to the new LED designs, you wont be able to buy the whole power supply.

LG Televison &... | Answered on May 11, 2020


Take the player to an audio visual repair shop.

LG Televison &... | Answered on May 10, 2020

Not finding what you are looking for?
LG BD690 Player Logo

5 questions posted

Ask a Question

Usually answered in minutes!

Top LG Televison & Video Experts

Muntejaya Ginting
Muntejaya Ginting

Level 3 Expert

10422 Answers

Ekse

Level 3 Expert

13434 Answers

The Knight
The Knight

Level 3 Expert

76352 Answers

Are you a LG Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

LG Televison & Video

  • LG Televison & Video

Most Popular Question

lg tv no sound picture only visible

  • Televison & Video
Loading...