20 Most Recent Toshiba e570 Questions & Answers

Microsoft Pocket PC 2002 Update 1 official statement This document provides useful information for end users and IT professionals to successfully update Microsoft® Pocket PC 2002 with the Microsoft® Server ActiveSync® client. It also outlines improvements to the Pocket PC 2002 software included in the update. New Feature: Microsoft® Server ActiveSync® client gives users the ability to synchronize directly through Microsoft® Mobile Information 2002 Server with their Microsoft® Exchange Server. Improvements: Improved support for Point-to-Point Protocol (PPP) connections to correct problems experienced when connecting to read e-mail or browse the Web while away from the office. Improved connection support in instances where a specific Internet Protocol (IP) address must always be used. Connection Manager no longer reverses static IP addresses and Domain Name System (DNS) server names. Improved Pocket Outlook Object Model (POOM) support for additional programs you can download or buy for your Pocket PC 2002. If you encountered problems with new programs crashing on your device, this update will help prevent future crashes. Improved viewing of Wireless Application Protocol (WAP) pages. Improved e-mail support for Simple Mail Transfer Protocol (SMTP) servers. Further improvements have benn made in the following features: PPP Networking Connection Manager POOM (Pocket Outlook Object Model) WAP Inbox To download this MS Pocket PC Update 1.0 from our Download files area click here Download and unpacking instructions: To download the file, simply "click" the desired file or link and select save to disk. Download the file to a known directory on your hard disk drive. For example: c:\Temp Open Windows Explorer and locate the "downloaded file" on your hard disk drive. Use an unpacker program to extract the files to a known location on your hard drive. The shareware WinZip unpacker can be downloaded from http://www.winzip.com

did you think about checking the charger?

You might contact the manafacturer for this issue. If it is fixable they will be the ones to fix it.

I hope this answers your question.
Thank you for visiting FixYa for your solutions.
Susan
PS - Please be sure to leave positive feedback :0)

you can take it to a cell phone repair and have it done. you can also probably buy the parts on ebay.com just go to ebay and do a search for Toshiba E570 LCD and Toshiba E570 battery
They should be readily available.
Also, if you go to youtube.com and search for
Toshiba E570 take apart you should find a video to guide you.

I do not have instructions to change this but you can get the battery here, Toshiba Genio e570 battery

If you are going to use either Windows Media Player or Windows Media Player 8 on your Pocket PC e570 you will need to program Media Player to recognise the button functionality of the Remote Control Earphones.

In my opinion there is some problem with battery. The best way to be sure about it, is to contact Service partner. They can check is there some hardware or just battery problem.

Personally I have not GPS on my PDA but there is no reason that it should not work properly. The only thing is that you should pay attention on several things. Check by software producer if the software is compatible to your PDA. Please also be careful which ports use GPS hardware because your PDA has no USB port just serial port. With another words check all this important things before you buy anything.

When using either Windows Media Player or Windows Media Player 8 on your Pocket PC e570 you will need to program Media Player to recognise the button functionality of the Remote Control Earphones by following these steps: Select Tools, Buttons. Select each individual function and press the relating button on the remote control. After all buttons have been programmed, press OK which should take you back into Media Player. N.B. The remote control buttons will not function when playing back voice recordings as the earphones can only be used for listening in this mode.

When you initialize your Pocket PC, the factory default values are reset to the status as when you originally purchased the Pocket PC e570. NOTE: When you initialise your Pocket PC, all data stored in the memory is deleted. Personal programs and data are permanently deleted from your Pocket PC’s. The factory pre-installed operating system Pocket PC 2002 remains intact. Before initialization your Pocket PC, remove all storage cards. To initialize your Pocket PC, please follow these steps: Turn off the power to the unit. Then press the power button while pressing and holding the reset switch with the stylus. Release the power button. When a screen appears, release the reset switch When initialization is completed, the "Welcome Screen" will appear. Set up the system according to the startup procedure as indicated by the on screen instructions.

When you initialize your Pocket PC, the factory default values are reset to the status as when you originally purchased the Pocket PC e570. NOTE: When you initialise your Pocket PC, all data stored in the memory is deleted. Personal programs and data are permanently deleted from your Pocket PC’s. The factory pre-installed operating system Pocket PC 2002 remains intact. Before initialization your Pocket PC, remove all storage cards. To initialize your Pocket PC, please follow these steps: Turn off the power to the unit. Then press the power button while pressing and holding the reset switch with the stylus. Release the power button. When a screen appears, release the reset switch When initialization is completed, the "Welcome Screen" will appear. Set up the system according to the startup procedure as indicated by the on screen instructions.

The Toshiba Pocket PC e570 is shipped with an Enabled security feature, which switches off the batteries. In order to be able to turn on the unit, the Battery Switch must be in a battery "Supply" position. Please check if the Battery Switch is in a Stop position or Supply position. The Battery Switch can be found on the lower left edge of the unit, next to the "Cradle Connection Port". Please see the below diagram The Battery Switch supplies or stops power to the Pocket PC. When using the Pocket PC for the first time, slide this switch to the left with the stylus pen. The Battery Switch Lock on the lower left side of the unit (see the diagram), secures the main Battery Switch to the Supply position. If you have further questions, please refer to the Instruction Manual page 2-3 (13 of 103).

If you install the Toshiba Pocket PC e570 via USB cradle under Windows 2000 or Windows XP a warning message may appear durning this installation: The driver for the USB cradle comes from Microsoft and is integrated in the ActiveSync 3.5 Software. This driver has not been signed, therefore this warning appears. Please Note: This is only a warning messages. You can certainly continue with the installation, and expect the driver to run well. Microsoft has produced a new ActiveSync Version 3.5 and has released it 1st of March 2002 . The issue is solved in the new version. The version number has remained the same, but the Build Number has increased form Build 1176 to Build 12007. This new ActiveSync Software can be downloaded from the Microsoft.

To be able to print from your Toshiba Pocket PC you will need additional software such as PrintPocketCE. This software allows you to print using Infrared, Bluetooth, Wireless network and serial connections.

Once the Socketcom Bluetooth card is inserted in the Toshiba Pocket e570 PC and the software has been loaded, the following instructions will set up the Toshiba PDA & Ericsson T39 mobile phone to connect to the Internet. Click on the Bluetooth icon in the bottom right hand corner. Click on Get Connected! Select the device under My Bluetooth phone is: In this case the Ericsson T39. The following information gives details on how to change the name of the Mobile device. Once this has been read, click on Next. The phone now has to be made discoverable so that the PDA will detect it. To do this, use the down arrow on the phone to select Extras and then click on Yes. Scroll down to Bluetooth and Click on Yes. Select Make Discoverable and a message on the phone will appear saying that the phone is discoverable for the next 3 minutes. Click on Next on the PDA. The PDA will now look for a Bluetooth device(s). Once the mobile is detected the PDA will search for the Device Name of the mobile. Click on Select and the devices will not connect and create a partnership. The following Device Bonding window should appear to create a bond between the PDA and phone. Click on Next. To create the bond a passkey must be entered on the PDA. This may be a between a 4-16 digit code. N.B. We would advise that the code be kept to a numeric sequence as the keys contain more than one letter on them, i.e. for the letter L, the number 5 key will need to be depressed 3 times. Once the passkey is entered, click on the Reply button. On the mobile, click on Yes to accept the incoming pass and then enter the same passkey. Click on Yes again to confirm. If the two values are correct, a message will appear on the phone telling you that the devices are bonded. The PDA should now congratulate you on your connection. For Internet access via Bluetooth, please follow the steps outlined below. The above instructions only need to be carried out each time a connection is required. However, the instructions below only need to be setup once. Click on Start, then Settings from the drop down menu. Click on the Connections tab at the bottom of the screen followed by the Connections icon utility. In the first drop box labelled "When needed automatically connect to The Internet using these settings" select New. Under the General tab you will be prompted to give the new connection a name, e.g. Bluetooth. Select the modem "Bluetooth Phone" and click on Next Make sure that the fields for the boxes titled Country code and Area code, are empty. The next field requires the full telephone number, including STD code, you wish to dial, i.e. your ISP telephone number. Put this in and click on Next. The next page contains a time out clause if the PDA is unable to connect within a set time. By default this should be 120 seconds. Make sure the tick box for "Wait befo

usually on toshiba you have to download the touch pad file from the manufacturers web site unless there is a disable in the bios this varies by model...be sure to get the right "utility file" for your particular model

http://driverwhiz.com/drivrutiner-se?brand=Toshiba&logo=Toshiba&subid=1001-se-se-10000008911&gclid=CInI5-y5srYCFdB3cAod_jQAGg TRY IT'S NOT FREE

If your Toshiba Strata CHSU40A3 phone system is not displaying anything and there is no dial tone, there could be a few reasons for this issue. Here are some troubleshooting steps you can try:

1. Check the power source: Make sure the phone system is plugged into a functioning power outlet and the power adapter is working correctly. You may also want to try plugging it into a different outlet to see if that helps.
2. Check the connections: Make sure all the cables and cords are connected properly. If the phone is connected to a network, check the network cables as well.
3. Reset the phone: Try resetting the phone system by unplugging it from the power source and plugging it back in after a minute. This will help to clear any issues with the phone system.
4. Check for any damage: Inspect the phone system for any physical damage, such as cracks or breaks in the casing or any loose components. If you find any damage, the phone system may need to be repaired or replaced.

If none of these troubleshooting steps work, you may need to contact a professional to diagnose and repair the issue with your Toshiba Strata CHSU40A3 phone system.

This says you can delete the Google login requirement. What happens sometimes though that the software gets upgraded and leaves the hardware behind. I just retired an old iPod because of this. https://www.google.com/search?q=Toshiba+Thrive+AT100-100+Google+login+Link+no+longer+working ..

More commonly called 'control alt delete' or the 'three finger salute' it has two purposes. On a computer that is running, it brings up Task Manager and other instant settings like Switch User, or log Out. On a computer that is frozen, unresponsive, it does a hard rest and forces the computer to reboot.