20 Most Recent NetGear N600 Wireless Dual Band Router - Page 7 Questions & Answers


Launch a web browser from a computer.
Type http://routerlogin.net into your web browser's address bar.
The user name is admin and the default password is password.
You will be able to view or reset your WiFi Password from this interface.

NetGear... | Answered on Jun 07, 2017


Log into the Router's ADMIN screen. Enter the router's IP address in your browser -- probably something like 192.168.1.1 GOOGLE the Router Model and "Manual", to learn the default User Name and password for the login. Probably hasn't been changed. Look for the Wi-Fi setup screen and change the SSID -- that's the network name broadcast by the router.

NetGear... | Answered on May 27, 2017


Check the Ethernet wire's connection between your modem and router.
Check all physical connection..
Hard reset your netgear router.


**If you need any kind of technical assistance you can contact support cell at http://www.vtechsquad.com/

NetGear... | Answered on Apr 03, 2017


The 7550 Modem Router was sold directly to AT&T ISP and came with no support. These units were somehow now available in retail channels. These units should come in a brown box. NETGEAR does not provide any technical support support for this model.
Please refer back to the reseller for any warranty and support options available to you.

NETGEAR Support Answer No NETGEAR support for the AT 7550 Modem Router


You need to go to AT&T for support and how to bridge this modem.

NetGear... | Answered on Apr 03, 2017


There is a WiFi switch, press it and hold for few seconds. The LEDs will come up

NetGear... | Answered on Feb 15, 2017


I have had this exact same scenario with my provider of service, the promised speeds are a joke and vary with the time of the day and the amount of usage, it is a big scam and the Feds should crack down on these companies. As far as solutions go, none that can help exist until the government gets on them and fines the kajebah's out of the companies doing this.

NetGear... | Answered on Feb 08, 2017


That is for pairing printers and other router based equipment. Instead of typing the key code.

NetGear... | Answered on Jan 31, 2017


press the wps button and will come up to pair

NetGear... | Answered on Jan 03, 2017


Might have a issue with the wireless. Suggest you connect both with ethernet. Using a netgear genie verify connectivity

NetGear... | Answered on Jan 02, 2017


Please start over following the instructions at
http://kb.netgear.com/25716/How-do-I-install-the-WN3000RPv3-as-an-Extender

NetGear... | Answered on Jan 02, 2017


If you do not know the password and are wanting to reset to out of the box settings
Power on the Router
wait several seconds
Hold down Reset for 5 to max 8 seconds ! **
connect to 192.168.1.1
flash the initial FW
now the Router reboots
wait several seconds
Hold down Reset for 5 to max 8 seconds ! **

** After every reset, the first login screen on StockFW should show something like "refreshing settings or loading settings"

Now its like Out of the Box.

NetGear... | Answered on Jan 02, 2017


can you plz attach the image file to your question

NetGear... | Answered on Dec 27, 2016


go into the router page by typing ip address of router on left hand side panel u will find firmware by clicking on it u will get new window in that u will find firmware update

NetGear... | Answered on Nov 05, 2016

Not finding what you are looking for?
NetGear N600 Wireless Dual Band Router Logo

69 questions posted

Ask a Question

Usually answered in minutes!

Top NetGear Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2277 Answers

Ekse

Level 3 Expert

13434 Answers

Mike

Level 3 Expert

4369 Answers

Are you a NetGear Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

NetGear Computers & Internet

  • NetGear Computers & Internet

Most Popular Question

need reset password factory settings

  • Computers & Internet
Loading...