Top 20 U.S. Robotics US Robotics Sportster 56K V.90 External Modem (USR568603) Questions & Answers


WnFax PRO will automatically detect USR chipset and use the preferred init string for the modem. There isn't really a list of init strings to use.



U.S. Robotics US... | 324 views | 0 helpful votes


Mass Air Flow sensor tells the engine how much air in entering the combustion chamber. I think the MAP is similar.

U.S. Robotics US... | 850 views | 0 helpful votes


This happens if you have an NVIDIA NView setup. You might need to add wfxmod32 , wfxctl32 to your NVIDIA application settings to disable all NView functionality for these programs.

WinFax Tools has many fixes for WinFax that are automated.
http://www.getfaxing.com/cgi-bin/ib315/ikonboard.cgi?act=ST;f=17;t=412

U.S. Robotics US... | 1,238 views | 0 helpful votes


There are some tools to help you uninstall WinFax completely at www.getfaxing.com , however, you can perform the manual installation which takes a bit of time :
http://service1.symantec.com/support/faxprod.nsf/docid/1998102114161204

WinFax PRO is not compatible with VISTA, so it is recommended you uninstall it.

U.S. Robotics US... | 263 views | 1 helpful votes


Here is the REAL solution for this problem with Winfax and Windows XP with Service Pack 2 or newer...and there's NO subscription charged for this solution like www.getfaxing.com tries to get you to do...

1. Go to Control Panel, then Regional and Language Options.

2. Click the Languages tab, then press the Details button.

3. Next, click the Advanced tab.

4. Put a check in the box: "Turn off advanced text services"

5. Restart your computer, start Winfax, and VOILA! Enter your numbers.

U.S. Robotics US... | 5,382 views | 7 helpful votes


This could be one of many things, but my first suggestion is this.

Open up your Device Manager:

Right click My Computer and select Properties - click on the hardware tab - click the Device Manager button.

Inside your Device Manager check to see if your Modem has a yellow or red icon next to it...

If so open the properties for your modem and click on the resources tab. This page will tell you if the devices IRQ number is conflicting with any other devices.

If the IRQ number is the problem try changing it, then re-booting your computer.....

U.S. Robotics US... | 346 views | 0 helpful votes


pls send me driver for win2000

U.S. Robotics US... | 443 views | 0 helpful votes


You need to install the drivers from this page. It's very simple, make sure you pick the according OS, which is Windows XP in your case. Then you need to enter the captcha code and select US or EU server to download from. If this is only partial to the software you need to use the N1996, feel free to respond for further assistance.

U.S. Robotics... | 52 views | 0 helpful votes


Looks like you may need some drivers! Go here to find them, all in one download for your convenience. Select the appropriate operating system, fill in the captcha, and select the US or EU server to download from. If you need further assistance, don't hesitate to send a reply.

U.S. Robotics... | 38 views | 0 helpful votes


In what?

Computers &... | 27 views | 0 helpful votes


go to device manager and check if there are names under the modem and network adapter

U.S. Robotics... | 557 views | 0 helpful votes


You can probably find the software on the manufactures web site and download it and run the software from the .exe file. Without knowing the model number of the Wireless Adapter I have no way of looking for you, but the manufacture should be able to provide it via download.

U.S. Robotics... | 235 views | 0 helpful votes


Look for the quick setup in the box, or try this http://www.usr.com/support/5461/5461-ui/setup_cable.htm

admin admin is what you're looking for.

Carl

U.S. Robotics... | 176 views | 0 helpful votes


The best time to change a battery is just before it needs replacing - it isn't easy to judge with most batteries so with some types interval changing virtually eliminates the surprise factor and inconvenience of an unexpected dying of a battery - in the early days of quartz clocks and watches it was reckoned fitting a new battery annually was the only way to a reliable timepiece though these days it is an entirely different story but the principle still holds good for some things, in particular the remote or plip to unlock the car...

Torch batteries are simple to remove and test with one of the many quite good and cheap testers and so replace them in good time to avoid walking home in the dark.

Some rechargeable batteries fail with little or no warning and while a tester would indicate a faulty battery it wouldn't warn you a battery is about to fail...

It is possible with time, patience and some experience to quite accurately predict when the liquid electrolyte lead acid battery is reaching the end of it's life but properly caring for the humble vehicle battery is more like a hobby few people care to spend time on and so a failed battery continues to surprise most motorists.

Computers &... | 21 views | 0 helpful votes



Natural Diamond Grading Reports & Services - GIA

www.gia.edu > gem-lab-service > diamond-grading
Natural Diamond Reports & Services. Submit Your Gem Now. Available Reports. Diamond Grading Report. Full 4Cs ...

Verify Your Report - International Gemological Institute

www.igi.org > reports > verify-your-report
Our online Verify Your Report service is available for IGI grading reports issued after June 2004. Verify Your Report permits quick and convenient confirmation ...

IGI - International Gemological Institute ' World's largest ...

www.igi.org
International Gemological Institute (IGI) is the World's largest Independent Laboratory for testing and Grading Gemstones and ... The New IGI Diamond Report ...

Diamond Grading Reports ' Jewelers of America

www.jewelers.org > ... > Diamond Buying Guide
A diamond grading report can be a document of identification in the event of loss or theft. Jewelry stores you can trust, like members of Jewelers of America, have gemological experts on staff who understand the possible variances and subjectivity inherent in diamond and gemstone grading.

Computers &... | 24 views | 2 helpful votes


contact turbotax directly

Computers &... | 20 views | 0 helpful votes


If you open System Information (Apple Menu > About This Mac > System Report) and look under Card Reader, what do you see? Try this with both a card inserted and no card inserted.

If the card reader is recognized, you should see at least a Vendor ID, Serial Number, etc. Otherwise, it's a hardware or Firmware issue. If you see card info with a card inserted, then the card is recognized but no being mounted, and most likely you've got a software problem.

For more fleshed-out solutions, you could refer to the following article:
5 Best Solutions to Fix 'Mac Won't Read SD Card' Error on macOS

Computers &... | 20 views | 0 helpful votes


Right click Start button to open Device Manager, find the SD card reader, open and choose Driver tab, try Roll back. If not available try Uninstall, restart PC to reinstall Driver.

Next right click Start to open Disk Management, find SD card on map at bottom, right click to assign a drive letter.

If that method doesn't help, you could use other working methods explained in this article:
How to Fix This Memory Card Cannot Be Used

Computers &... | 17 views | 0 helpful votes

Not finding what you are looking for?
Computers & Internet Logo

20 questions posted

Ask a Question

Usually answered in minutes!

Top U.S. Robotics Computers & Internet Experts

Steven Wander
Steven Wander

Level 3 Expert

595 Answers

Lee Hodgson
Lee Hodgson

Level 3 Expert

4810 Answers

Brad Brown

Level 3 Expert

18562 Answers

Are you an U.S. Robotics Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

U.S. Robotics Computers & Internet

  • U.S. Robotics Computers & Internet

Most Popular Question

winfax uninstall vista

  • Computers & Internet
Loading...