20 Most Recent Linksys Wireless-G Broadband Router - Page 6 Questions & Answers

Assuming the case is closed and it's not damaged, it's no more dangerous than sleeping near a clock radio. Just don't roll onto it or get a cable wrapped around a limb or neck.

you can make sure your new laptop is on only the g band that should help, cos its trying to go on the n band which is causing it to drop.

If you purchased it from comcast, the default username is comcast, default password is 1234. If not, please post back details of where it came from and I should be able to assist you with the default password.

The Linksys G router gives you both wired and wireless connections over a broadband Internet connect to create a local area network. The Linksys router is compatible with wireless G and B devices, through the 2.4-GHz wireless band. The wireless speed is at 54 megabytes per second and you can get 100 megabytes per second with a wired connection. You have to set up the wireless configuration on the Linksys before using it on your network. Plug the router's power cable into an electrical outlet. Attach an Ethernet cable into the Internet port on the back of the router. Connect the other end into your broadband modem. Connect your computer to the Linksys G using another Ethernet cable. This Ethernet cable can go into any of the wired router ports. Open your Internet browser. Type "192.168.1.1" in the address bar and hit "Enter." This is your router's IP address and the home of its Web configuration page. Click "Wireless." Click "Manual." Alter your SSID, also known as your network name. You can change this name to any value that you want. You can also change the wireless channel if you are in an area with many wireless connections that may interfere. Click "Save Changes." Click "Wireless Security." Choose an encryption method to encrypt your wireless transmissions. WPA or WPA2 are common security protocols you can use in wireless networks. Input a network key, also known as the network password. Click "Save Changes." Setting Up WPA Wireless Security on a Linksys Wireless Router http://www6.nohold.net/Cisco2/ukp.aspx?pid=80&vw=1&articleid=3696 Wireless G-Broadband Router support http://homesupport.cisco.com/en-us/wireless/lbc/WRT54G b> b> Changing the Wireless Network's Name (SSID) on a Linksys Router http://www6.nohold.net/Cisco2/ukp.aspx?pid=80&vw=1&articleid=4037

To connect to your wireless router, the router's wireless settings needs to be configured with the SSID, encryption etc. and also the wireless cards in all the laptops/computers needs to be configured with these router's wireless settings. Then the laptops/desktop computers can communicate with your wireless router. Connect a LAN cable from the Linksys to the LAN port on your computer. Open a browser and enter the Linksys configuration URL http://192.168.1.1 The default login = admin The default PW = admin You can protect your router by changing the default admin PW (write it down and put it in a safe place) Go to the wireless configuration and set up the SSID and WPA or WPA2 encryption to protect your wireless network and Internet from unauthorized access. Now apply these settings to the wireless card in your laptop/computer. To secure your wireless network from unauthorized access, please click on this link and follow my instructions :- http://www.fixya.com/support/r3559128-wireless_router_security

Connect computer to the router no 1 slot on the back.

Go to computer open Internet Explorer.

Login to the Linksys Router page(usual address 192.168.1.1 after reset).

This will prompt for the user name password for you.

Leave username blank type password =ADMIN or admin

Login to router and go to wireless tab.

Below click on security tab.

On the wireless security tab and select this as WPA personal.

Click on save settings and reboot the router.

Your wireless network is now secured.

To reset the Linksys back to the default settings - Press and hold the pinhole RESET button at the back of the router with the power ON for 20 secs. then release the RESET button. To connect to your wireless router, the router's wireless settings needs to be configured with the SSID, encryption etc. and also the wireless cards in all the laptops/computers needs to be configured with these router's wireless settings. Then the laptops/desktop computers can communicate with your wireless router. Connect a LAN cable from the Linksys to the LAN port on your computer. Open a browser and enter the Linksys configuration URL http://192.168.1.1 The default login = admin The default PW = admin You can protect your router by changing the default admin PW (write it down and put it in a safe place) Go to the wireless configuration and set up the SSID and WPA or WPA2 encryption to protect your wireless network and Internet from unauthorized access. Now apply these settings to the wireless card in your laptop/computer. To secure your wireless network from unauthorized access, please click on this link and follow my instructions :- http://www.fixya.com/support/r3559128-wireless_router_security

Did your phones work with that router before?Did the wireless get turned off on your router? Can your phone see the router but cannot connect or does connect but no internet.Some newer devices do not support WEP encryption if you phones have never connected but can see your wireless router you may have to change to WPA or WPA2 encryption to getthe phones to work, but older versions of windows or MAC OS may be unable to connect using WPA or WPA2, If you are using windows xp only sp3 can use WPA older versions will not work with it nd have to use wep.

Is this it? http://www.netsmart.co.nz/manuals/wrt54_linksys.pdf

You need to set WAP or WPA2 encryption to prevent public access. To connect to your wireless router, the router's wireless settings needs to be configured with the SSID, encryption etc. and also the wireless cards in all the laptops/computers needs to be configured with these router's wireless settings. Then the laptops/desktop computers can communicate with your wireless router. Connect a LAN cable from the Linksys to the LAN port on your computer. Open a browser and enter the Linksys configuration URL http://192.168.1.1 The default login = admin The default PW = admin You can protect your router by changing the default admin PW (write it down and put it in a safe place) Go to the wireless configuration and set up the SSID and WPA or WPA2 encryption to protect your wireless network and Internet from unauthorized access. Now apply these settings to the wireless card in your laptop/computer. To secure your wireless network from unauthorized access, please click on this link and follow my instructions :- http://www.fixya.com/support/r3559128-wireless_router_security

Your MAC address (physical address) is baked into your NIC (network interface card). Your wireless NIC will have it's own mac from your wired NIC.To change it you would need to replace the NIC itself. You can, as an alternative, spoof your MAC address with programs. It basically intercepts all the frames and swaps out your real MAC for your spoofed MAC.If your using Linux, it should already be installed, from a terminal just type macchanger.For windows you would need to download a program. This is a decent one for Windows.http://www.technitium.com/tmac/index.html

Secure the Linksys. You didn't supply the Model of Linksys? Use the user manual for setup: http://homesupport.cisco.com/en-us/support/routers/WRT54G

Most likely a compatibility issue. The tcp handshake is the initial connection were upon both sides of the connection agree upon speeds and protocol etc. How are you trying to connect them?

First open the browser ->put the IP address(normally IP address of d-link router is 192.168.0.1 but you should check the manual ) ->login using username and password.Go to the "Security" tab or option and click on WEP or WPA, select the encryption, choose a password and click save or apply.If you need any kind of technical assistance you can contact for Router support

To connect to your wireless router, the router's wireless settings needs to be configured with the SSID, encryption etc. and also the wireless cards in all the laptops/computers needs to be configured with these router's wireless settings. Then the laptops/desktop computers can communicate with your wireless router. Connect a LAN cable from the Linksys to the LAN port on your computer. Open a browser and enter the Linksys configuration URL http://192.168.1.1 The default login = admin The default PW = admin You can protect your router by changing the default admin PW (write it down and put it in a safe place) Go to the wireless configuration and set up the SSID and WPA or WPA2 encryption (ie. password) to protect your wireless network and Internet from unauthorized access. Now apply these settings to the wireless card in your laptop/computer. To secure your wireless network from unauthorized access, please click on this link and follow my instructions :- http://www.fixya.com/support/r3559128-wireless_router_security

It's not quite that easy, it's a compatibility issue. If your HP printer has Air Print compatibility, you can use Air Print, if not, Download, in the iPad app store ,a free app for HP printing. Follow instructions

I think product code should be mention in bill summary ....either you can ask ..!

Yes it's a N. Take a look at this for info:http://en.wikipedia.org/wiki/IEEE_802.11