20 Most Recent Linksys WRT51AB Wireless Router - Page 3 Questions & Answers

0helpful
2answers

How do I find my password?

Please try. Admin. Hope this helps
12/23/2011 6:05:26 AM • Linksys WRT... • Answered on Dec 23, 2011
0helpful
2answers

How to Fix Linksys Router Error 2118?

This seems to be a symptom of a configuration error, which can be fixed by resetting the router to factory default. Do this by finding the (often partially hidden) reset button on the device, and pressing and holding down the button, with the power on, till lights start flashing on the router. Let go of the button and allow the router to reset (can take a minute or two). You will now have reset the router to factory default. To connect to your ISP, you'll need to enter your account details (and any other specific information) provided to you by your ISP. You will also have to set a name and password for the wifi section of your router (if it has wifi) if you don't want it to be freely accessible by everyone within wifi range.
7/29/2021 11:33:41 AM • Linksys... • Answered on Jul 29, 2021
0helpful
1answer

Linksys WRT54G2 V1 suddenly stopped working

Disconnect the power to it, wait 5 minutes and power back on.
7/13/2021 1:37:57 PM • Linksys... • Answered on Jul 13, 2021
0helpful
1answer
0helpful
3answers

How to Setup and install Linksys Extender

https://www.linksys.com/ca/support-article?articleNum=140923 Which model? Go to the Linksys website and download the instructions for your model of extender.
9/24/2020 8:15:01 AM • Linksys... • Answered on Sep 24, 2020
0helpful
1answer

Why is my Linksys WRT54G wireless-g router not being recognized anymore?

just fixed one yesterday. the power pack was no good.AC wall wart, power green LED blinked endless. and the white logo, LED is dead.. a new pack fixed it. also the wrong pack used, ! do not mix them up. oops. first year 54G, v1 uses 5vdc pack. at v2, and up all want to 12vdc pack, bottom sticker on above failed was v6. you said recognized, does that mean the 4 rear Ethernet wired jacks are dead, or just wifi dead.? first the ethernet ports must work, or wifi is doomed.
2/18/2020 11:46:05 AM • Linksys... • Answered on Feb 18, 2020
0helpful
1answer

How to fix Linksys router error 321 ?

Good day, This might be of help . Steps To Fix Linksys Router Error 321:- Step1:- Check the Firewall Settings To check the Firewall Settings is the first priority for the users. Then check the firewall settings of the computer/ Laptop, will be helpful to find the problem. If there is any firewall installed on the computer, so the users need to turn it OFF.During the process, the users ensure that the Local Area Connection on the computer is not disabled. The Local Area Connection should not have any static IP address assigned. If there is any then the users need to immediately set the IP address to automatic. Method2:- Run the Installation CD Again:- The users require trying to run the CD again and ensure when the CD runs, it will ask to connect the computer and the modem to the router with the cable. So the users will need to notice, that there all the lights lit up on the router. If it's not, then users will need to setup their router without the CD. The users can get the instruction to setup router manually in the method 3. Step3:- Try to Setup Router Without Installation CD Setup Linksys Router without Installation CD is another best option for users in order to completely avoid the in order to fix Linksys Router Error 321. Follow the below-given instruction to Setup Linksys Router without Installation CD: First of all, connect the main computer to the Ethernet port on the router. Then the users need to connect the modem to the Internet port on the router. Now it's time to verify the status of the light that is blinking properly. Next, users need to open the setup page of the Linksys Router and then change the Internet connection settings manually. In the setup page of the Linksys Router, the users can change the settings of the router as per their needs. Then the default IP address of many Linksys router is 192.168.1.1. And the default username and password would be an "admin". Wait for a few minutes, when the main computer is able to access the Internet, so users need to create a wireless network for their wireless computers/devices. or you can call them @ Toll Free 1-800-204-6959 that is Lynksys support.
2/3/2020 1:14:25 PM • Linksys... • Answered on Feb 03, 2020
0helpful
1answer

LinkSys SuPport NuMber $1{877}*[717]*^{0727} in USA/CANADA

Setup helps
11/26/2019 11:52:55 AM • Linksys... • Answered on Nov 26, 2019
0helpful
1answer

How to Set Up Linksys WRT54G Wireless G Router

The vent actuators are bad. there should be two. one on each side. they are small toy like motors that open and close the vents from within to allow the hot air to blow by closing the vents to the a/c unit.
11/21/2019 5:05:43 AM • Linksys... • Answered on Nov 21, 2019
0helpful
1answer

How do i configure my linksys router for best preformance, optimum said im paying for speed but my router needs to be configured

Which Linksys model of router? What cable service? What did they say needed to be configured? https://www.linksys.com/no/support-article?articleNum=142912
11/15/2019 11:43:12 PM • Linksys... • Answered on Nov 15, 2019
0helpful
1answer

LInKsYs rOuTeR sUpPoRt pHoNe nUmBeR~+1:[877]:[769]:[O969].hElP

You can get best linksys router support phone number at Toll Free Number ( 1-877-769-0969 ). Linksys router Tech Support number ( 1-877-769-0969 )
11/12/2019 5:56:19 AM • Linksys... • Answered on Nov 12, 2019
0helpful
1answer

LiNkSyS rOuTeR cUsToMeR sErViCe pHoNe nUmBeR 1,{877*.SCAMMER 69*}.help

DO NOT CALL FAKE NUMBERS OR GO TO FAKE WEBSITES
11/11/2019 5:35:18 AM • Linksys... • Answered on Nov 11, 2019
0helpful
1answer

LinKsYs rOuTer sUppOrT pHoNe nUmBeR $#@[1.877.769.0969].help

Your message does not qualify as a question or query for a problem, try somewhere else DO NOT MAKE THIS SITE WITH YOUR GARBAGE Take your GARBAGE to another Side Your message qualifies as SPAM
11/1/2019 4:54:30 AM • Linksys... • Answered on Nov 01, 2019
0helpful
1answer

Linksys router tEcH SupPoRt pHoNe nUmBeR{-l844~33O*2330}New York USA

ANKU SINGHALA, Your message does not qualify as a question or query for a problem, try somewhere else DO NOT MAKE THIS SITE WITH YOUR GARBAGE Take your GARBAGE to another Side Your message qualifies as SPAM
10/26/2019 2:41:46 PM • Linksys... • Answered on Oct 26, 2019
0helpful
2answers

Linksys Router tEcH SupPoRt pHoNe nUmBeR:~{-1{84433O2330^-} Musary

Warning! This is a SCAM DO *NOT* CALL THESE NUMBERS. These phony support numbers send you to criminal call centers where they will install malware, steal ID and/or extort money from you . Please only ever use the support contacts from the official company website
10/18/2019 5:21:09 AM • Linksys... • Answered on Oct 18, 2019
0helpful
2answers

Linksys Router Tech Support pHoNe%%[+l{84433O^2330]:~%%NumbER usery

Warning! This is a SCAM -\ DO NOT CALL THESE NUMBERS. These phony support numbers send you to criminal call centers where they will install malware, steal ID and/or extort money from you . Please only ever use the support contacts from the official company website
10/18/2019 3:50:18 AM • Linksys... • Answered on Oct 18, 2019
0helpful
1answer

LINKSYS tech support pHoNe #[+18OO^8O3:-1O69;-] nUmBeR USA

Laliren, Your message does not qualify as a question or query for a problem, try somewhere else DO NOT MAKE THIS SITE WITH YOUR GARBAGE Take your GARBAGE to another Side Your message qualifies as SPAM
10/15/2019 3:15:32 AM • Linksys... • Answered on Oct 15, 2019
0helpful
1answer

LINKSYS Tech support pHoNe [{+1-800/'828-0294*;-}] nUmBeR AB .

Anita, Your message does not qualify as a question or query for a problem, try somewhere else DO NOT MAKE THIS SITE WITH YOUR GARBAGE Take your GARBAGE to another Side Your message qualifies as SPAM
10/13/2019 4:05:29 AM • Linksys... • Answered on Oct 13, 2019
0helpful
1answer

How to Connect Cisco Router To Linksys Router ?

configure connected Cisco Port to Linksys Router interface that connects to linksys router has to be configured with an ip address and made active https://www.cisco.com/c/en/us/td/docs/routers/access/800M/software/800MSCG/routconf.html then a static route has to be set up to tell cisco that the linksys router ip address is on the port you connected it to . https://www.cisco.com/c/en/us/support/docs/dial-access/floating-static-route/118263-technote-nexthop-00.html
10/10/2019 9:00:57 AM • Linksys... • Answered on Oct 10, 2019
Not finding what you are looking for?
Linksys WRT51AB Wireless Router Logo

11 questions posted

Ask a Question

Usually answered in minutes!

Top Linksys Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2278 Answers

Ekse

Level 3 Expert

13435 Answers

Mike

Level 3 Expert

4377 Answers

Are you a Linksys Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

WRT Linksys

  • WRT Linksys

Most Popular Question

after changing lan ip not access setup

  • Computers & Internet
Loading...