20 Most Recent Linksys BEFSR11 Router - Page 9 Questions & Answers

CALL THE COMPANY OF THE MODEM OR THE PERSON OF YOUR ISP OR LOOK UP THE NAME OF THE BRAND ON THE INTERNET

CALL THE PEOPLE OF THE MODEM OR THE INTERNET SERVICE PROVIDER OR LOOK UP THE NAME OF THE MODEM ON THE INTERNET

Go to your asterisk CLI by typing: asterisk -r -vvvvv and check the messages that comes across. You may find a "NOTICE" stating failed to register and the reason why. My case was an ACL permission, which is the Deny or Permit section of the extensions config. Here is the default, which will allow anyone to register and is not recommended. Deny: 0.0.0.0/0.0.0.0 Permit:0.0.0.0/0.0.0.0

This is normally on your router page settings. Access your router's management page using your computer browser. Then under Access Restrictions tab, check category Website Blocking by URL Address Facebook shouldn't be in the list then save the settings.

It's possible that this is a hardware failure or a power adapter failure. Try to reset the unit and reinstall it again. You can also check for firmware updates available online. Try to use other power adapter as well with the same specs with the original power adapter.

Your router may be set to not respond to pings. Are you sure you have typed the correct address? From a command prompt (open start menu and run cmd.exe from the run box or search box, depending on operating system) and type ipconfig to see the gateway ip address, which is the address of your router.

If it is set to the default the username should be "admin" and the password should be either "admin" or "password". If they have been changed and you cannot access it, you will have to factory reset it by holding the reset button down for 10-15 seconds then access it using the credentils above.

if you type 10.1.1.1 into your internet browser you will be able to access your router settings. you can set up the password there

admin is the default out of the box if you changed it you have to reset router use admin then change it after you get back on linego to linksys.com support type in your model # look thru FAQ's or download manual