Top 20 Logitech X-530 5.1 Surround Sound Speakers&Subwoofer - 970114-0403 Computer Speakers - Page 8 Questions & Answers

its the settings problem not the computer.check if the drivers for built-in microphone are properly enables or got deleted or disabled. you can check the drivers in the control panel. This will help. Thanks please keep updated.please do rate the solution positively .thank you for using fixya

In control panel, goto "sounds & audio devices". Select the audio tab and click the volume botton on audio output. Make sure there are no check marks in any of the boxes on this control panel.

i have the exact same problem! i'm trying to get it to work with my compaq presario, but it just wont work! i'm frustrated with it. someone please help

YOU DONT WANT

#1: Shut down your computer. You must first shut your computer down toinitiate the factory restore.#2: Start up your computer and as the computer logo appears (such as Dell orHP) hit "Ctrl>F11" simultaneously. This may be different fordifferent machines, but the most common keys to hit are"Ctrl>F11." If this does not work, the F8 key has been said towork for certain machines.
#3: Select "Repair My Computer" from the list of menu options thatappear and press "Enter."
#4: Choose the language settings that you would like and then click enter.
#5: Enter the administrator log in and password if it asks you for thisinformation.
#6: Choose the factory reset option. This should reset your computer to thefactory settings when you bought your machine.

Yes. Speakers have a standardized 3.5mm connector (the same as headphones). Your laptop also has a headphone port which will fit this plug and play sound out through the speakers.

radio shack is best bet.. a little pricier solution would be best buy

Please check charger, propoblly light on charger is flashing to. If yes you have to replace charger on new one or fix the existing. ( leroyek69 )

Have you altered volume level in the PC to Max??

Are they pluggd into the PC sound card port (Green). If so, go into control panel / Sounds / Sounds / Audio and see if driver is NOT greyed ouy, if it is then driver is either not installed or corrupt.

Simply download the mobo sound driver for it and install,

Alternatively you can go into device manager and delete sound driver / scan for hardware changes.

You have to enable 5.1 to use those speakers. Go into control panel / sounds / sounds / audio / advanced and select this option there.

check your cable settings if its inserted in the correct plug-in....also check if its not muted....also try to play other disc if there is a sound coming from the speakers

I discovered the speakers are broken.

Bought another brand.

i have trouble with my speakers right one one little nothing on the left side and whe you buy new ones do then have two pug in to your pc or just one and pug in to wall out let

Hi.

That connector is used to convert the RCA cables out to an 1/8 apple Ipod connector.

I think it is only used to connect an Ipod to your console.

To get 5.1 you need to connect to a surround system, to connect you can useone of the following cables:


• Xbox 360 Component HD AV Cable • VGA HD AV cable • S-video AV cable

The best choice is probably using component cables.

After connecting configure following instructions here: How to configure analog or digital audio settings on your Xbox 360

Hello,

Thanks for using FixYa.

Sound like you have some power issues on your mm50. Try to check if you sense any heat from the mm50. This abnormal shutdown of the device may be caused by bad capacitors. I suggest that you bring your mm50 to a reputable repair shop because trying to troubleshoot here won't do you much good we cannot see and feel how the device runs. You might end up messing up your mm50 thus making you spend more. (I wish I had one of those)

I hope this helps. Thanks and have a nice day.

- HotRatchet

Windows 7 hasn't been released yet so you must be using the free pre-release candidate which was made available to the public in order to establish what further work would n=be needed before final release and to get a clearer idea of what equipment may have problems with it.

This version of Windows 7 is completely unsupported and hardware drivers for it have not yet been posted by hardware manufacturers. Contact Logitech directly to find out if and when they'll be releasing a Windows 7 driver for your product.

Have you checked that the volumes on the headphone cable and the pc ar to the max?
Since you didn't said what model all i can say is to you is to look in the box it came with for a disk with drivers. If ther's one than probably you need to install it.
But if it's just a wired headphone it shouldn't need a driver. Test it to check that you didn't bought s dud: plug it somewhere else, a stereo or something. If it works then test the connector on the pc using another headphone. 

If they work when you test them then that is not the cause.

When you say driver do you mean for the program you use to watch video files.

If so these are known as CODECS and it may be that you loaded the incorrect ones and should remove them.

If your video files are movies that you got from the internet then they may require a special player or codec.

logitech rarely has replacement parts. and for this model is not for the u.s. distribution so youcan not even call u.s tech support for help. try ebay or craiglist. if the connector is not proprietary you might be able to get a electronic repair shop to repin the connector.