Questions & Answers
My computer won't recognise all five speakers
I believe you need to go into audio settings via control panel and change two channel desktop speakers to five channel in the drop down menus.there is usually a test scenario for 5 channel that then pulses sound through each speaker separately to ensure your setup us correctly working .
Logitech X-530 subwoofer stopped giving power to
check the drivers click stat control panel administation tools computer management deivice manager scroll to
sound video and game
controllers could be a yellow question exclamation mark? ! or a red X right click to re-install drivers
click start control panel
sounds and audio volume advanced speakers make sure you have selected the correct
speakers also audio you will find 3 drop down lists make sure you have the
correct settings there
you dont have a motherboard disk you will need to download the sound drivers
check the leads attached to
the rear of the input plugs make sure the connection is good
or you might have to clean
the dust from your computer dust causes static which causes your computer to
overheat and all sorts of problems
also if you had to hit the subwoofer to get it to turn on check all power leads attached the to and around the subwooferhope this helps
How do i hookup my speakers to my tv
Computer speak usually have a 3.5" headphone plug (just like a pair of headphones).
This plug is not native to a TV, they instead usually use RCA plugs (red and white with a solid center post and metal 'sleeve' which makes the connection) these are the most common audio out format for most TVs.
You can go to radio shack and buy a 3.5" headphone to RCA adapter which is just a short cable with a female 3.5" plug at one end and two RCA plugs at the other (red and white). This is pretty cheap ~$5 and should get you up and running.
You will be going from the label Audio Out ports on your tv through the adapter cable and into your PC speakers.
1 - r u facing NO Audio/Sound issue...?
2 - is ur Volume Control not responding ?
3 - is ur Sound and Audio Device in Control Panel Grayed out ?
4 - Do u get a msg "No Active Mixer Devices Installed....when u try to open Volume Ctrl etc etc ?
if ur ans to any one of them is Yes...then u are being spammed by Microsoft....ur Sound Control IRQ is being frozen by a recent update from Microsoft....and no file update or any sound driver update can fix it, neither Microsoft is issuing any patch to fix it….
Full solution is available in my website (Support page)...it's quite simple process to fix it, and I am not charging any money, just trying to do some service.
Copy the above address in the browser, replace + with dots.....all the best....
Leftt speaker not working after new GPU
well doing that new GPU Card now has new GPU HDMIL sound channels
so in sound setting change outputs to z323
not told you how the z323 wired to the PC.
mine uses, FIBER optics. and never fails.
the only way to lost LEFT size only is jacks not fully seated (baring hard failures , of the 323)
mine is 900 series, and does fiber. (no hum fiber is king)
yours has no such things.
you are using RCA jack into the speaker right?
NO PC told at all. mine has a custom soundcard, and can do it all, you name it, ALL.
the problem is posting not tell at al what PC this is of endless vast. there are. desktops can do it all. laptops not.
back of the sub has 2 RCA jacks aux input.both must be good and working back to the PC sound card.
the sound card must be set up correcty
and the silly (no GPU card told) card, must be output all turned off on hdmi.
that is all I can do blind , I can not see what you own or what is connected or not.
Z320 speaker system. Why doesn't it turn on?
Maybe the speakers are broken and need to be repaired and the fuses need to be replaced then inside of the speakers. There are people that fixes speakers and see what the problem is and if it can be repaired or not.If the parts can not be replaced then it would be easier to buy new ones than to fix the current ones that you have.
Not finding what you are looking for?