20 Most Recent
- Page 5 Questions & Answers
You can get the driver off the logitech wesite, go to support or drivers, type your model in the search and I'm sure you'll be able to dowload and install it from there. Hope this helped.
Subwoofer not working
Yea I would say most likely a loose wire going to the bass control, is it accessable to behind the controller easily? if so take a look. they are usually soldered, but it may have been a weak solder point that came loose.
Crap sound, subwoofer no longer working
Guys try to reinstall your audio drivers, because i had the same exact problem, so find out what sounds card you have and go on their website and download the latest sound card driver
X230 logitech not working.
i did the same to mine,
just replace the power transformer with one that accepts 110-240 volts
easy to do, but check cost might be better to buy a new set depends on your situation
Noise coming from speaker with controls
/* Style Definitions */
mso-padding-alt:0in 5.4pt 0in 5.4pt;
font-family:"Times New Roman";}
hi!! we have read your problem..every problem has a
solution.since you havent used your speakers for a long time disconnect it and clean it with a cleaning solution.make sure the electrical contact(connection) is tight enough since loose connections will cause such sounds.hope your problem is tackled..have a nice day
Sub woofer making a screaching loud noise when powered on
The pop from other electrical items makes me think it's a ground
problem but I am do not have a clue as to what type of setup you are
running over there. Did you try a surge protector?Is it 110volts with a seperate ground wire?
Have you tried running a UPS?
NO SOUND FROM SUBWOOFER
Are you playing your audio(playback) which has been recorded for 5.1 speaker system? If not then you cant make all the speakers work since those heads do not carry any signal. Remember plugging stereo jack on a stereo cassette/tape player where the recording is done mono----- only one Chanel will have output unless you adjust the head manually. Here there is no scope for that, so essentially the recording has to done for 5.1 output otherwise you will get the same output as now...sodeep
Not finding what you are looking for?