Lexmark X656de AllInOne Laser Printer - Answered Questions & Fixed issues

• 01: Lift the paper bail, and then remove the fuser wiper cover
• 02: Remove the top rear door
• 03: Open the fuser cover
• 04: Remove the fuser
• 05: Remove the new fuser from the packaging
• 06: Insert the fuser
• 07: Close the fuser cover
• 08: Attach the top rear door
• 09: Lift the paper bail, and then insert the fuser wiper cover

Or watch this video Lexmark Product Videos click on Service Maintenance then click on Replacing the fuser Manual X651de X652de X654de X656de X656dte X658d X658de X658dme X658dfe...

Please try to use a spare toner, if you have tried using the spare toner and you still get the same error, this maybe a sensor issue (40X4370 Sensor).
If you need further assistance, please contact Lexmark Technical Support.

go to printer properties in the control panel and click on latest driver

Please make sure the print head is seating properly as it should. Another reason could be the contacts of the print head are not connecting properly with the main printer due to dirt. Remove the print head, clean the contacts of the print head and where it seats at the printer. hope this will help

Download from here Valerie
http://www.siliconguide.com/drivers/device/130/

Here is a manual for the same. In case you are unable to do it, please call on 1-877-805-1027 for further assistance. http://www.lexmark.com/publications/pdfs/lexmarkj110/eng/clean.pdf

Yes it is true machine will print because its maybe need some type of repairing or the machine is not a printer of a photocopy

The problem with XP is that its not support by any new printers. However, you may be able to use the universal HP PLC5 driver to run the Lexmark.. According to Lexmark windows XP is a supported OS for this printer. Go to the Lexmark site, support and download the driver. Here is the link support lexmark com Advanced Business Computers specializes in printer copier network support and maintenance. Printer Repair Service in Miami and Fort Lauderdale FL

Go to 'control panel/printers'

Make Your Selection Try the lexmark support

support lexmark com

it has to be a lexmark cartridge,not a refilled or generic cartridge,if it is a lexmark,take it back to the store and tell them

Hi, I assume you meant a Lexmark Z735 printer. This is an older printer, but the printer may work with Windows 7 Home Premium, Professional or Ultimate. You can try to install the driver for Windows Vista, BUT MAKE SURE you install the correct driver for your system. Check to see if you have a 32 bit or 64 bit system and install the appropriate driver. Check this link first: www.microsoft.com/windows/compatibility/windows-7/en-us/Search.aspx?s=Lexmark%20Z735&type=Hardware You should uninstall the current driver first. Then see these links: Lexmark Z735 Driver http://support.lexmark.com/

You should change font in your text processor. Priter only prints as you format your text in your computer

here you have it: Use Adobe Acrobat reader if you can't open it in the first place: http://www.lexmark.com/publications/pdfs/2007/x54x/v5404678_en.pdf

I guess you want to know how to open it up to change cartridges? Are you sure of model number? I cant find a thing on it.

Hi John, you can find all the connection instructions on the users manual from page 49 on. Here's the link to the manual. Good luck! http://images.lexmark.com/publications/pdfs/2007/6500/v4897402_en.pdf

Hi Driver related problems can be solved easily on: Driver Update Software for XP Vista 7 8. Wish you best of luck Thomas

http://support.lexmark.com/index?page=content&locale=EN&userlocale=EN_US&id=OS27

You likely have a failed ID chip on the cartridge. If you purchased recently and it is OEM I would contact lexmark to complain. They should replace failed cartridges that are not at end of life. If you purchased a reman or 3rd party, go after the vendor.