20 Most Recent SWANN H264 8 Channel Dvr W500 Gb Hard Drive Swa42d3 Questions & Answers

swann , DVR only they can help you or read your manual , their web site. here they are https://support.swann.com/s/

Hard drive faulty

It's going into ir sound like you are not supplying enough power to the cameras or you might have a timer on you system

press exit or ese

you will need a two set of SMA cable with connector at both ends(you determine the lenght of your cable) and a T connector

The video loss is telling you that there is no video, so this is to be expected. When you plug in the NVR, does it power up at all? If not, it could be a power or cord issue. Check that out first and then check with Swann if you have any warranty.

Your DVR hard drive might be defective, replace the hard drive and reboot the DVR.

M stands for Motion from Motion Detection.

You need to port forward the DVR network ports into your internet router

A flashing green light on a Swann 960H Pro Series security camera system can indicate a few different things, depending on the specific model and configuration of your system. Some possible causes of a flashing green light include:

1. The camera is in setup mode: When a camera is first powered on, it may flash a green light to indicate that it is in setup mode and ready to be configured.
2. The camera is in standby mode: When the camera is not actively recording, it may flash a green light to indicate that it is in standby mode and ready to start recording.
3. The camera is recording: Some models of the Swann 960H Pro Series security camera system have a green light that flashes when the camera is recording.
4. The camera is low on power: Some models of the Swann 960H Pro Series security camera system have a green light that flashes when the camera is low on power.
5. The camera is malfunctioning : Some models of the Swann 960H Pro Series security camera system have a green light that flashes when the camera is malfunctioning.

Video that may help, but that is proprietary information and not generally available. https://www.google.com/search?q=Swann+pro+wiring+diagram+for+camera+circuit+board ..

Try holding the stop or esc button for 10 to 30 sec and let go when you hear a long beep.

This a lengthy procedure, I better refer you to the Swann link where you can find instructions. New Password Reset Procedure

That is proprietary information. Contact Swann direct and tell them what your issue is. https://www.swann.com/downloads/product/906wch_wdc_woy_w2y_w3y_wcx_w2b_instructions_en160209.pdf Or this? https://www.sneakersvip99.top/products.aspx?cname=ir+color+ccd+camera+wiring&cid=62 ..

That means it cannot find a hard disk to store information on.

Swann have great online support direct from the company.

General Idea: On-screen Display (OSD) or Image Control

https://support.swann.com > article Feb 5, 2020 - To access this on your DVR (such as DVR8-5580), you can select a channel ... to avoid losing details due to too much darkness or brightness. Missing: cursor ‎' Must include: cursor

Home - Swann

https://support.swann.com > ... SwannBuddy™ Video Doorbell ... (4480, 4580, 4680, 5580, 5680, 8580, 8780) ... Many of my bullet cameras have lost the IR Illumination over the years., ... ..

Contact Swann to request the diagram.

https://www.youtube.com/watch?v=-XQkIxmHkB0

I would replace all the cables.

Depends what you mean by pairing. The device allows you to view via a Swann app on your 2 mobile phones. So you can watch CCTV video streaming simultaneously on the 2phones or any compatible Android / iPhone device.