20 Most Recent
Zebra TLP 2844-Z Thermal Label Printer - Page 7 Questions & Answers
Zebra TLP 2844 does not print anything.
Are you trying to program in ZPL? if you are then you don't need a driver, send the code directly to the port and it will print. I would firstly reset the defaults to make sure there are no corruptions in the settings. Just in case you not sure, press and hold the feed button, the green light will flash 1 then 2 etc on the 4th flash let the button go and it will calibrate and reset to the factory defaults.
The printer is not feeding the label until the
Simple yeah.
Printer calibration is the problem.
see this video ,
http://vodpod.com/watch/3948392-how-to-calibrate-zebra-tlp-2844-printer
For over 4 years, Trridev Labels has provided Barcoding solutions and Barcoding equipment to a wide range of large and small companies in virtually every industry sector. Trridev Labels offers more than 10,000 brand name products and services such as Barcode Labels, Barcode Printers, Barcode Scanners, Thermal Transfer Ribbons (Wax, Wax Resin, Resin), ID Card Printers.
Contact Trridev Labelss Mfg Co – If you have requirement of Barcode Labels, Barcode Printers , Barcode Scanners, Self Adhesive Labels, Thermal Transfer Ribbons, Printer Heads, RFID Solutions, Barcoding Solutions. We provide you a complete solutions for barcode.
Call us at +91 – 96000 07995 / 98840 42305 To Get the Best Price Tagged with Best Quality.
One label printing over two label forms
Always check to make sure the printer is advancing one label at a time by itself before printing. If it does then you know the printer has a good read on the label size. Then if it misaligns when printing then you know the problem is in the printer driver because the printer is only going to do what it's told to do.
So best is to turn printer off, power up, press feed to see if one label feeds ok. If the label feed is off at this point then the printer needs to be calibrated which is done by pressing and holding FEED while turning the printer on.
Hope that helps !
What is the defult ip address for the zebra
When received or when a reset is performed, the default IP address is: 10.3.4.102. The best way to confirm this is to force the printing of a configuration label. Look at the configuration label that is printed. That will contain the "current" IP assigned to the printer. You can download the manuals for this from the Zebra web site using the model number to get to the printer specific page. Choose the download tab.
Dan
Using tlp 2844-z
hold the green feed button down intill it flashes 4 time to default the printer and calibrate it
Flashing red light wont print
Autosence your printer by turning it off and then hold down the feed button while turning it on and release feed button when light flashes red.
Having problems with printer margins. It will
You Have to set label size in the printers driver. A hundred diferent label sizes can be used but the driver must know the size to layout the bitmap correctly
Goto printers and faxes then right click on your zebra printer driver. Left click properties and then left click the advanced tab, then left click
printing defaults button. In the zebra designer driver size is on this page. The Zebra Universal driver you click a few levels deeper by clicking paper output then paper size. If your size is not listed in the drop down arrow then click customize, then highlight user defigned on the upper left off the screen and enter your correct label size.
I'm trying to reorder a ribbon for the TLP 2844-z
Just type the part number into google and you will get plenty of hits for sites selling that part number of zebra ribbon.
Zebra 3200 Performance Wax-Resin Ribbons 3200 Perfromance Wax-Resin Ribbon (2.5 in. x 2,928 in., Single Roll) for TLP 2844 Printers
Tlp 2844 printer is callibrating is proper but not
You need to set the label size in the driver or it will not layout on the calibrated label correctly. the default zebra size is 2x4 so if you have a smaller label it will print across 2 labels as the driver thinks it has a 4 in long label
Labels are
Is this unit in thermal transfer or thermal direct mode? Depending upon the usage of this machine, perhaps a new thermal head is required. If thermal direct, try a different roll of labels, it is possible to get a bad batch. In thermal transfer mode, the tape could be bad as well. Try a new one to test.
Let us know what you find.
Thanks,
Dan
My Zebra TLP 2844 is not printing at all.
ABOUT YOUR ZEBRA PRINTER
first of all cahck your USB cable and power it's geting power
what u do is just un-install your drivers and try againe it will work smoothly
if not then change your USB cable
Not finding what you are looking for?