20 Most Recent Hitachi Deskstar 7K250 120GB (hds722512vlat80) 120 GB Hard Drive - Page 9 Questions & Answers

click start control panel administration tools computer management device manager look through all of your devices if you see a yellow question mark?or exclamation mark ! or red xright click to reinstall drivers or

if you can see your usb but its not workingports(com&lpt)right click update driver

sometimes the wires inside the cable will be damaged due to bending or stretching or placing heavy equipment upon the cable

just replace the cable of the hard disk, when you plugged the external disk drive you got that windows could recognize the USB device change the cable everything should work fine again,

check the USB leads that attach to the motherboard usually red-white-green-black make sure they are securely seated and have no dust build up on them dust will cause static and a lot of unforeseen problems

if this fails to fix the problem type in run "regedit" then press ok then you can see registry editor then locate below key. HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E965-E325-11 CE-BFC1-08002BE10318} And remove upper filter and lower filter. Then restart computer then check. Also locate the below key and make sure it's value is 3 not 4. HKLM\system\currentcontrolset\services\usbstor make sure start value is 3 not 4

if still no luckyou might have to install a usb 2 or 3 card they are cheap and easy to install you can buy these on Ebay very cheap hope this helps

What you need to do is that, make a backup from the HARD DRIVE onto another drive or computer then you will have to format the Hard drive. You are getting those errors because the conversion might not have been completed successfully or anything like that.This is how you can format itGo to start, Right - click on "My Computer" go to "Manage"Then go to Disk Management in the Right pane. Then select the drive that you want to format to NTFS.Go right at the bottom, right-click on the desired drive and select format. Formatting a drive n this manner will ERASE ALL DATA from the drive. This is why it is very important to Do a Backup of all your data before you do anything. Format your drive with NTFS

restart your computer repeatedly tapping the f8 key to enter safe mode while the screen is black once in safe mode where the only things working will be your keyboard and mouse

allowing you to attempt to repair your computer

you could select the option start at last known configuration that worked this will tell what file has been corrupted or missing or it might be a hardware problem

then select restart if the problem still persists f8 back into safe mode you might need to select your operating system to load into safe mode click start control panel administration tools computer management in the left panel events + to expand then system you will see all errors in right panel right click select properties this will tell you what has occurred and the time it occurred and you might be able to work your through the problem

by installing the driver of your modem(what ever the modem you are using) may fix this problemso install the driver of modem plus install all the driver like for usb , graphics etc for working of your computer correctly

on system start up time press F8 key for no of times.you can see some option from that you can select repair and continue with options given

Could be...but first,make sure you select full format and not quick format during setup.You can also try formatting using another machine by connecting the hard drive as a removable device.Hope it helps.

You can't unlock your hdd at home. Go to a professional, or get the original password, only that way you can unlock it.

Click start control panel administrive tools,computer management,device manager scroll down cd-dvd rom drives you might see a yellow question mark ? right click you will have options to update driver,roll back driver,or select properties general troubleshoot, select driver click to reinstall drivers click update driver or uninstall then reinstall
if this does not fix the problem it might be a registry problem if you cant see your disk drive in windows explorer Close all open programs

Click on Start, Run, and type regedit and press Enter Click on the plus signs (+) next to the following folders

HKEY_LOCAL_MACHINE

SYSTEM

CurrentControlSet

Control

Class

{4D36E965-E325-11CE-BFC1-08002BE10318}

This folder is the DVD/CD-ROM Drive Class Description in the registry. Look for any of the following names in the right hand column.

Upper Filters

Lower Filters

Upper Filters.bak

Lower Filters.bak

If any of the above keys shown in step 4 are listed, right-click on them and choose DeleteAfter deleting the keys, close the registry editorReboot your computerOpen My Computer and check to see if your CD or DVD drives have returned. You may also want to open Device Manager and verify that the yellow exclamation and error code on the CD or DVD drive is gone. or

you might have to physically unplug the leads for this cd/dvd restart your computer then plug them back this should activate the found new hardware wizard or you might have to uninstall then restart your computer then reinstall your DVD/CD then reinstall the driver for this device hope this helps you

just plug it into usb port of any pc then once it detect it u can right click and fromat then chose the ntfs file system.

Repairing a disk drive is not cost effective. If you have valuable information on the disk that needs recovered, there are services that will do it but they are EXPENSIVE!
Best bet is to just buy a new disk or new computer.

There are considerable problems with Hitachi drives, this is not uncommon on older models. Remove the drive and take it to a data recovery specialist. Do not power up the drive.

click start run type cmd then type chkdsk/r/f which will scan for and attempt recovery any bad sectors and automatically fix any corrupt files on your hard drive or click start control panel administrive tools,computer management ,disk management right click on your drive select properties click tools you should see click check now click start two boxes automatically fix files and scan for and attempt recovery of bad sectors place then a tick in both boxes then select check now start do not do anything while the chkdsk utility is in progress any input may damage your computer then defragment your hard drive hope this helps you