20 Most Recent
Mackie CFX 12 mkII 12 Ch. Compact SR Mixer w/Effects - Page 7 Questions & Answers
How do I do transposition in e16 Roland?
To transpose a sound on the Roland E-16 keyboard, you can use the Transpose function. Here's how to do it:
- Press the FUNCTION button and then press the TRANSPOSE button.
- Use the + or - buttons to select the number of semitones you want to transpose the sound. The range is -12 to +12 semitones.
- Press the EXIT button to exit the Transpose function.
Once you have transposed the sound, it will be played back at the new pitch. Keep in mind that transposing a sound may affect the overall tone and timbre of the instrument, so you may need to make additional adjustments to achieve the desired sound.
3/19/2023 10:07:47 AM •
Music
•
Answered
on Mar 19, 2023
Casio wk 3500 does not turn on
Check the polarity on the adapter plug. It must correspond to the diagram on the keyboard . If it's reversed, just cut and resolder the cable that connects to the keyboard.
My 3500 also has a similar problem. It only switches on if I plug the power and immediately press start . If I wait a few seconds it won't start.
2/5/2023 10:50:39 PM •
Music
•
Answered
on Feb 05, 2023
Casio MA-120 tone bank manual
An8054 voltage regulator and sound ic has been blown off, no data is available online of ic any other ideas for powering on please help me
1/31/2023 2:00:38 PM •
Music
•
Answered
on Jan 31, 2023
Casio Privia PX-135 sound issues?
It sounds like you are experiencing a problem with your Casio Privia PX-135 keyboard. There could be several possible causes for this issue, including problems with the keyboard's internal hardware or software, or issues with the cables or connections between the keyboard and other equipment.
To troubleshoot this problem, you could try the following steps:
- Check the connections between the keyboard and any other equipment, such as an amplifier or speakers. Make sure all cables are securely plugged in and not damaged.
- Try a different set of speakers or headphones to see if the issue is with the keyboard or the output device.
- Check the keyboard's settings and make sure that it is configured correctly.
- Try resetting the keyboard to its factory default settings. This can often resolve issues with the keyboard's software or firmware.
If none of these steps help, it is possible that
1/2/2023 4:58:57 PM •
Music
•
Answered
on Jan 02, 2023
I cant get the disc drive to work on my technics
Try formatting a fresh disk in the KN2000. If it doesn't work, something in the drive has gone bad. First thing would be to CAREFULLY clean the heads using 91% isoprophyl alcohol.
10/10/2022 3:14:15 PM •
Music
•
Answered
on Oct 10, 2022
The LCD display on my
I have a PC88MX and there IS a reset for the entire keyboard, however
whatever you may have changed will be reset to factory settings. You must
remember, this is a "hard" reset as al of the parameters on the PC88 are set
to their initial factory state which includes all Setups and Effects.
Just press "ENTER"...the display will as "are you sure"?
9/15/2022 2:43:09 PM •
Music
•
Answered
on Sep 15, 2022
Behringer pmx2000 doesn't turn on
Check the fuse which should be close to the power cord on the back. Check it with an ohms meter or replace with a new one.
8/31/2022 10:57:04 PM •
Music
•
Answered
on Aug 31, 2022
Not finding what you are looking for?