20 Most Recent ION Audio IED11 Sound Session Complete Electronics Drum Set - Page 4 Questions & Answers

If you have speakers connected to it, disconnect them to see if the static stops. If there are no speakers clean the on / off switch and any volume controls with electronic switch cleaner. Other ideas here https://www.google.com/search?q=electone+organ+static+noise ..

Cold solder joints or broken solder joints at din plug junction on board

Try formatting a fresh disk in the KN2000. If it doesn't work, something in the drive has gone bad. First thing would be to CAREFULLY clean the heads using 91% isoprophyl alcohol.

There are parts in electronic music devices that change the electricity and filter it. The parts age an lose the ability to do that.

I have a PC88MX and there IS a reset for the entire keyboard, however
whatever you may have changed will be reset to factory settings. You must
remember, this is a "hard" reset as al of the parameters on the PC88 are set
to their initial factory state which includes all Setups and Effects.
Just press "ENTER"...the display will as "are you sure"?

This was an easy search! -Details of Ronisch Pianos- Make Ronisch Made by Pfeiffer / Bluthner Rating (see Key) Estimated Number In UK Year and serial number 1855 -420 1875 -6100 1895 - 23000 1915 - 63200 1935 - 76250 1955 -78300 1966 - 100000 1985 - 185000 2000 - 209960 1 more row

Ronisch Pianos Information ' Roberts Pianos - Oxford

https://www.robertspianos.com > cdetails > Make=Ronisch... About featured snippets• Feedback

Ronisch piano serial number reference information. Find out ...

http://www.besbrodepianos.co.uk > pianoserialnumber Find out the age of your Ronisch piano here. Simply type in the serial number into the box below then click "Calculate". Type in your piano's serial number:.

Check the fuse which should be close to the power cord on the back. Check it with an ohms meter or replace with a new one.

If electronic trace the cable back to make sure connection is secure. Sometimes there is a button that turns sustain off, check control panel to make sure it is switched on. If piano is acoustic take off front panel beneath pedal board to make sure wooden rod is still connected.

the 100+ page manual has no words on data errors. so no history told when did it last work good.? try unplugging it over night an retest. the only 2 cures are: 1: buy there full shop manual and diagnose it. 2: get it serviced. you-do-or they do.

i think its a Takamine guitar the assumed question are ..how old and what it is worth not a rare one price what someone is willing to pay you for it new start from $250 to $1500this is the best reference the company siteuse contact us and should get the answer required The Hardest Working Guitar

Try changing the batteries.

Hi, I picked up an old Casiotone CT-607 today, found it at a old second hand shop, it's probably wrecked but does anyone know what to do to try and get it going again?

The SG Pro X manual... Your search is over. contact: [email protected]

• IAlso, am interested in buying your SG Pro X piano, if reasonable and in good shape.

I suggest you try Ebay.Unfortunatle I see this kind of problem a lot where parts for not really that old products are unobtainable.

The C. F. Netzow is listed separately, but the Netzow Piano Co. serial # would lead to it being built in 1915.

Question edited for clarity, spelling of maker name Lowrey / Lowery. $50 on eBay. It is a combined Owner / Service Manual. https://www.google.com/search?q=lowrey+fiesta+lc25+organ+service+manual ..

It could be bad shielding on cables. It could be close proximity to electrical interference. It could even be next doors fridge. If it is steadily getting worse, it is likely to be failing capacitors inside.

Hi, I am answering this generically, because there are a few things that can cause this on a lot of keyboards.

1. Make sure there are no headphones connected. I have removed headphones and the 3.5mm plug comes out leaving the adaptor, this still cuts the speakers.
2. Sometimes the switch on the headphone socket does not make properly, work the headphone jack in and out a few times.
3. Local MIDI should be set to ON, if you cannot find this, as it is often buried in some deep menu, link MIDI out to MIDI in with a cable.
4. Do a reset, be careful as some restore factory defaults and you will lose user presets, so back up, MIDI dump first, others allow resets that do not affect the voices.
5. connect to your usual software (sequencer, patch librarian, etc) and see if the keyboard has been muted, volume set to zero etc.
6. Is the volume knob turned up?

All the best, Chris the fader.

'this mixer'?? The one that only you can see!! :>/ Google make model specs or make model manual

My unit when I plug in it says PD not numbers