20 Most Recent NetGear WGR614 54Mbps Wireless Router (obwgr614_1) - Page 2 Questions & Answers

Netgear WGR614 54Mbps Wireless Router

1. Begin setup of your Netgear Wireless Router by first reading the instructions in the included manual, and following their guidelines for plugging in and initializing the access point. The first few steps in this guide should coincide with the information found in the manual, however we will follow up with important information on how to secure your wireless access point.
2. After powering up the router, use an ethernet cable to connect your computer to one of the ports on it marked 1 through 4. Next open a web browser window on the connected computer and type http://192.168.1.1 into the address bar and press enter. This will take you to the Netgear Smart Wizard welcome page, click OK to begin the configuration. The router will attempt to detect the type of connection you have and the next message you receive should be Dynamic IP (DHCP) Detected, click Next once you see this.
3. Next you will enable the wireless capability of your router. In the dropdown box for the region where you are located select United States from the list. On this screen you should also change the Wireless Network Name (SSID) from its default value to something unique so that your Base Station will not be confused with another. Click Next.
4. You should now see a message confirming that your connection is working and wireless is enabled. However, your are not secured yet. Read the notes and click Done. Then direct your browser to http://www.routerlogin.net to continue the configuration. A window will pop up prompting you for your login and password, enter admin for the username and password for the password, then click OK.

Hi,
am attaching the picture for where you can find the reset button.

Hi,

There are 2 ways to find out the WEP key on your network.

1.
Netgear usualy sets default key which is located underneath the router ( it is a 10 digit long number you find below the bar code )

2.
If you are still unable to locate the key, download this utility program and it will help you locate the key and other key information about the router ( network ) you have setup

Click on the download button below and follow the instructions
Download



* Please rate this solution with thumbs up

You need to login to your router. To begin, You must be at a PC connected to the router.

1. Open you web browser.

2. Navigate to http://192.168.1.1 or http://192.168.0.1 depending on you model

3. If you have never setup your router you should login with default credentials. They are:
Username: admin Password: password
(if you have set the password and do not remember it, you must perform a factory reset: Press and hold reset button on the back of the router for aprox. 10 seconds.)

4. In the left-side menu, click "Wireless Settings". Your key will be listed in there

Hi default password for nedgear's router is password and user name administrator. You can chcek this on your router label. Of it help please rate it. Regards

Usually to change and install a password on your wireless router there are several procedures but the following links should give you an idea as to the right procedure.
- http://compnetworking.about.com/od/routers/ss/routerpassword_2.htm
- http://compnetworking.about.com/cs/wirelessproducts/qt/adminpassword.htm
- http://netsecurity.about.com/od/stepbystep/ss/change_ssid.htm
- http://www.ehow.com/how_2188502_reset-password-linksys-router.html
- http://www.ehow.com/how_5043404_password-protect-wireless-router.html
hope the links have been helpful? feel free to ask for further assistance.

Go to NETGEAR Router

According to NetGear's documentation for that model router:
To restore the factory default configuration settings without knowing the administration password or IP address, you must use the Default Reset button on the rear panel of the router.
1.Press and hold the Default Reset button until the Test LED turns on (about 10 seconds).
2.Release the Default Reset button and wait for the router to reboot.

only thing you can do is do a total reset

Are you trying to set up the router.
You can do it manually without the CD.
Make sure that your computer is able to go online through the modem.
If your computer is not able to go online through the modem then you will need to call ISP first.
If your computer is able to go online through the modem
then you need to connect the computer to the router and the modem to the router.
open the set up page of the router and change the settings of the router according to the ISP.
Click Here for step by step by instructions

The Router may have lost the IP Address setting of the ISP. If you are using a static IP Address provided to you by your ISP, access the Main Menu of the router?s configuration at http://www.routerlogin.net, select Staus from the Maintenance tab, Check to see you still have the IP Address given too you by the ISP. However, if you obtain you IP dynamically, restart the router over again making sure the cables are properly connected. If the problem persist contact your ISP.

1.Use reset button to reset router to factory defaults and run the setup wizard to restore router information for connection with ISP.

Any decent computer store should have a suitable cable in stock. The colour is irelevant.

If you're using an ADSL connection the details you need are below.

Settings for an ADSL connection through a telephone line.

Open a web browser and log onto your router.

Find Internet Wan > Connection Type.

Set the Router to use PPPoA, type in your User Name and Password in the spaces provided. If you do not have a Service Name or do not know it, leave the Service Name field blank. After you have typed in your information, click "Apply Changes". After you apply the changes, the Internet Status indicator will read "Connected" if your Router is set up properly.

WAN > Connection Type PPPoA
User Name > first[email protected] (or virgin.com or whatever)
Password > *******
Retype Password > *******
VPI/VCI > 0 / 38
Encapsulation > VC MUX
MTU > Leave as Default

Find Internet Wan > DNS.
Select Automatic from ISP
(Virginmedia DNS servers are Primary: 194.168.4.100 Secondary: 194.168.8.100)

Find Lan Setup > Lan Settings
Ensure DHCP Server is set to On

If the details entered are correct the router will show connected and the internet lamp will be green.

Do the configuration on a wired connection.

Default IP address: 192.168.0.1 Alternate Admin URL: http://routerlogin.net/ Default admin username: admin Default admin password: passwordtype ip in the address bar on internet explorer and type the login info than chose wireless you can set a wep key and you can also dissable wirless function

I would recommend checking that your laptop is set up on the access list in the router. Login to the router and check the settings.

have you set your local network card to 192.168.0.2 or 192.168.1.2 then try to access your router using a web browser ay 192.168.0.1 or 192 168.1.1 if you are on a dsl line you may have to input a user name and password to connect to the internet

You will need to check the wireless settings of the router is there any computer connected to the router ? If yes then you can open the router set up page on that computer. Router set up page is the page where you can check all the wireless settings of the router.

No one can determine this but the purchaser but as a person who user all formats the i Pad will work for some in a business environment well according to the experts. If you like the media aspects of the device it is well suited for this.
There are all sorts of apps that are being designed for this device as we speak.
It as some experts says will change the communications as new it.
Technology is every minute not every year.

Windows 7 has various changes from previous operating systems, you need to disable the built in firewall to establish contact.
You also need to go to the netwrok and sharing centre and choose to setup a network.