20 Most Recent NetGear MR814 Wireless Router Questions & Answers

0helpful
1answer

Not working

the default username/password for this router is admin/1234
10/31/2019 12:50:03 PM • NetGear MR814... • Answered on Oct 31, 2019
0helpful
1answer

I have a netgear router purchased about 7 months

Press and hold the reset button for 30 seconds if you must to see if that resets the router to factory defaults.
11/9/2017 4:30:40 AM • NetGear MR814... • Answered on Nov 09, 2017
0helpful
1answer

When I connect my computer

You have to enter the router password on every wireless device you want to connect to the internet. You usually only have to do it once per device, but it won't connect without the password. The password it's looking for may be on the label on the router or in the wireless setup page of the router.
5/10/2017 6:09:34 AM • NetGear MR814... • Answered on May 10, 2017
0helpful
1answer

Mr814v2 working fine but told my network is not secure. how do i secure it?

by logging into the router and changing the wireless settigs to use wpa-psk encryption . http://kbserver.netgear.com/pdf/mr814v3_ref_manual.pdf section 4-11
3/11/2015 10:45:42 PM • NetGear MR814... • Answered on Mar 11, 2015
0helpful
2answers

I forgot my username and

Hello there.

To remove the username and password of your router you just need to reset it. Here is how to reset it:

1. Check the back of your router and look for the reset button (it is a small button inside a small hole)

2. Push it using a pin or anything similar, and hold it for about 15 seconds.


Now you can connect with it without any passwords.

damneddle_1.jpg
5/27/2014 7:57:06 AM • NetGear MR814... • Answered on May 27, 2014
0helpful
1answer

MR814 does not get IP address from my ADSL modem

try power cycle modem to clear out the computers onfo then it should connect to the router
11/21/2013 9:10:07 PM • NetGear MR814... • Answered on Nov 21, 2013
0helpful
1answer

I am trying to set up my printer to my computer and it keeps asking for my security string

If you dont know your router password how you connect to the internet?
12/5/2012 3:03:34 AM • NetGear MR814... • Answered on Dec 05, 2012
0helpful
3answers

Can't access settings page

the web page of your router cannot be changed by the isp, but what may have changed is your network cards ip address, as thats the only wat the router cannot be reached if you are on a different address route, so check that your card is 192.168.0.X, the last being different to the router. the only other way this may have happened is if you have used an installation disc and it has changed all address so that they are different to what the routers manufactured address is and therefore cannot be altered but is allowing a static ip address or mac addresses for internet connection. The outer may have simply froze out, and you may have to reset the router by way of a pin hole button at the rear of the unit or underneath or firstly try a restart by unplugging it.
10/15/2012 5:31:39 AM • NetGear MR814... • Answered on Oct 15, 2012
0helpful
3answers

I lost my CD

You can reset your Netgear router/wireless MR814 router to the factory settings from within the router manager. The reset procedure removes all user-configured settings and returns the router to the original factory settings. For this reason, only reset the router if you encounter problems that can't be solved with other methods.Step 1: Check that your Netgear router/wireless MR814 router is properly connected with your system or not. If it is OK, then press reset button on Netgear router for at least 10 seconds. The 'test' light should flash during this process.Step 2: Now open browser and enter Netgear's IP address into the address bar. Generally, '192.168.0.1' is the Netgear router IP address but you can find specific IP address in Netgear router manual.Step 3: Now enter your default username and password to log in to router.Step 4: Click 'Erase' button under the 'Revert to Factory Default Settings'. This process will erase all your previous changes that have been made to the router and restore the configuration settings to factory setting. Don't interrupt the process until the process is finished.Once the router's 'test' light has stopped blinking and the configuration page you are on has refreshed, the router has been reset. Feel free to get instant online Netgear router support at http://www.vtechsquad.com/netgear-router-support/ to fix Netgear router/wireless router issues.
10/15/2012 5:25:04 AM • NetGear MR814... • Answered on Oct 15, 2012
0helpful
1answer

My wifi light won't turn on and i have no wireless connection

you need to configure the wireless settingsconnect to your router using a cable and then go to your browser to 192.168.1.1go to wireless and setup your wireless network settings
2/27/2012 1:27:27 AM • NetGear MR814... • Answered on Feb 27, 2012
0helpful
1answer

How do i reset or

to configure the netgear router and to secure its network. . . .1, first make sure that your laptop is connected directly to the netgear router via ethernet cable.2. after securing step 1, on your computer, open browser, ( internet explorer or firefox )3. go to the address bar, the one with the http:\\ and erase everything inside it.4. type in there, 192.168.1.1 or www.routerlogin.net.5. username is " admin "password is " password "6. you would see netgear set up wizard. 7. for wireless configuration, click wireless settings on the left side of the set up wizard.8. you can edit network name, and get your network security key under security options. make sure to choose WPA PSK TKIP. so that you can have a personalize network key9. the network security key is the " passphrase "then click apply.then your all set for wireless connectivity.
9/22/2011 6:47:04 PM • NetGear MR814... • Answered on Sep 22, 2011
0helpful
1answer

Setting up a password

Not sure which password you want to set up. The main default password for NetGear is "password". You can change that to about anything you want. If you ever forget it, there is a tiny hole on the bottom or back side that you push a paper clip end in. That will reset the router back to the original user name and password. which is... "admin" and "password" to sign in to your router.. Hope this Helps Fix Ya up.
8/13/2011 1:21:15 AM • NetGear MR814... • Answered on Aug 13, 2011
0helpful
1answer

Have no wifi connection

Type in 192.168.1.1 go in to router setting and make sure the is check. Also make sure the SSID broadcast is check also.
6/24/2011 4:51:57 PM • NetGear MR814... • Answered on Jun 24, 2011
0helpful
1answer

Connect Netgear Wireless Router mr814

Follow the instructions from the installation manual--> copy/paster this link to your browser navigation bar and press enter >> ftp://downloads.netgear.com/files/MR814_QCard.pdf
NOTE: PDF manuals require the Adobe Acrobat Reader for viewing and printing.

5/26/2011 8:17:43 PM • NetGear MR814... • Answered on May 26, 2011
0helpful
1answer

I have a nieghbor who

you can change your wireless encryption password by going to internet explorer
http://192.168.0.1 or http://192.168.1.1
the default login/pass
  • Username = admin
  • Password = password
    • For older devices, password = 1234
if this does not work you will need to reset your router by holding the reset button for 30 seconds or more when you power it on.
  1. Use an Ethernet cable to connect a computer to any one of the four LAN ports of the NETGEAR router.
  2. In a web browser, enter the router's IP address - either http://192.168.0.1 or http://192.168.1.1 by default.
  3. When prompted for a Username and Password, enter the default username and password (admin;password) unless you have already changed it. NETGEAR recommends changing the default password to increase the security of your network.

    For Steps 4-9, refer to Figure A below.
  4. Select Wireless Settings from the Setup menu in the left-hand navigation bar.
  5. Under Wireless Network, enter your desired network name in the Name (SSID) box.
  6. Under Security Options, select WPA-PSK [TKIP] + WPA2-PSK [AES].
  7. Under Security Options (WPA-PSK + WPA2-PSK), enter your desired network password into thePassphrase box.
    • WRITE DOWN or KEEP NOTE of your network name, security option and passphrase - you will require them to connect wireless computers and devices to your network.
  8. Click Apply to save the settings.
3/29/2011 9:23:25 PM • NetGear MR814... • Answered on Mar 29, 2011
0helpful
1answer

I would like to know how to secure with password

There a great article at General Router Setup.
If you need more help post back!
Thumbs and testimonial are welcome!
1/31/2011 7:13:08 AM • NetGear MR814... • Answered on Jan 31, 2011
0helpful
1answer

I am trying to set

Get the directions from NetGear, for free, and use their install wizard.
Here are the (generic) highlights of what needs to be set:

Wireless Router

It is usually easiest to run the install wizard, but be sure to be ready to set the items listed below.

Things to set:

Note: Routers are intended to be set by geeks. You have to SAVE EVERY page, or the changes will be lost. A geek knows this (apparently). The router gives no protest...just dumps your changes.

1. Login password (RECORD THIS!!). Consider taping to bottom of the router. Physical access is not the security issue.

2. Set a recognizable system ID.

3. Invoke wireless security of at least WEP.

a. Assign your own access code, 10 digit home or cell #. Consider taping to bottom of the router. Physical access is not the security issue.

4. Check that your router is set to broadcast its' presence.

12/31/2010 6:35:56 PM • NetGear MR814... • Answered on Dec 31, 2010
0helpful
1answer

Hola... quiesiera saber por que

puede que haya un falla con la fuente de poder, con la tarjeta madre o con la toma de corriente en donde se esta conectando el router.
intenta conectar el router en otra toma de corriente espera algunas horas y vuelve a intentar.. tengo un router dlink que a veces deja de prender y despues de algunas horas de estar desconectado al reconectarse vuelve a funcionar, no es normal pero pueda que la condicion o el fallo solo sea temporal
si el router tiene menos de 1 ano pide reemplazo bajo garantia.
12/20/2010 12:16:14 AM • NetGear MR814... • Answered on Dec 20, 2010
Not finding what you are looking for?
NetGear MR814 Wireless Router Logo

113 questions posted

Ask a Question

Usually answered in minutes!

Top NetGear Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2278 Answers

Ekse

Level 3 Expert

13435 Answers

Mike

Level 3 Expert

4377 Answers

Are you a NetGear Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

NetGear Computers & Internet

  • NetGear Computers & Internet

Most Popular Question

lost cd

  • Computers & Internet
Loading...