20 Most Recent NetGear PS121 Print Server - Page 8 Questions & Answers

The category is listed as Network and Wireless Adapters, but the question is leading to an answer regarding routers. The router in a network is what allows connection and assigns IP addresses. The router uses encryption and a security passkey (password) to allow uses to connect. You would need to log into the router using the administrator ID and password, go to the Wireless page and change the access password. ALL USERS would then need to reconnect using the new password.

It's the number on the bottom of the router, marked "key".

To log into your router's Admin web interface:

1. Using a computer that is connected to the router with an Ethernet cable, launch a web browser. Examples of web browsers include Internet Explorer, Google Chrome, and Mozilla Firefox.
2. In the browser address bar, type http://www.routerlogin.com. You can also try the following:
   • http://www.routerlogin.net
   • 10.0.0.1
   • 192.168.1.1
   • 192.168.0.1

Get another router, this is a common problem with Netgear, life span is too short. Try TP-LINK, you'll be surprise.

compare the password on your phone to another device that uses the same wi fi router or log in to router and have it show the wi fi password and compare it to the password on the phone make sure the phone is using router name ssid

Changing the administrative password on NETGEAR router Answer NETGEAR...

Hey! You shouldn't need to manually enter in the network name. Refer to your documentation that came with your router for the default network name (SSID) and passphrase. As always, I recommend you change these when you can to something more secure. Select your network in your network settings on your TV, input the password, and it should connect. If you can provide the model number(s) of the TV/router, I can guide you a bit further in the right direction. Hope this helps!

You can't use nextbook tablet when it leeps or when you sleep. Please ty to reformulate your queston so others might answer you

unplug your roku and plug back in then search for wireless then put in your new password

That depends on MANY factors, so you can only tell by MEASURING it in a live environment. Go to the below address and select "Begin Test" http://www.speedtest.net/ http://www.speedtest.net/

You can do this. Sign in to the router and turn security off.

Its the wire plug or the wire itself if wireless router. And your land phone working fine. Call the internet provider company to fix this for you

look under your router for your routers IP address now open explorer and type that into the address bar at the top of the page. you should now have a name and pass word to put in to enter your routers settings ( passwords should be in your routers manual )

Assuming you are using Windows 7 or later. Right Click on the Network Icon in the Status Bar Go to Network and Sharing center Go to Network and Sharing Center then look upper left side and choose "manage wireless connections" you can rename or adjust the SSID for each wireless connection there. You can get rid of the extra wireless adaptors by going into Control Panel>Device Manager, go to "view" then choose "show hidden devices" after that go to network adaptors and you should be able to delate any extra network adaptor entries.

Yes.

Hi, Follow the below steps to configure the router:

1. Connect the cable/phone line coming from Internet Service Provider to the WAN port of the router(isolated port).
2. Connect the computer to the router using any one of the 4 available ports.
3. Open the browser(Internet Explorer or Mozilla Firefox).
4. Access the router (usually http://192.168.0.1).
5. Login to the router (Username = admin Password = password unless you have changed it).
6. Click 'setup wizard'(at the top of list) from left menu.
7. Select yes and click next.
8. It should give you a "PPPoE Detected" and then click next.
9. Enter the login and Password of ISP click apply.
10. Once the settings are updated click on 'router Status' and click on 'connection status' button(at the bottom of the page).
11. Click on connect button.
12. Connecting to server should show 'connected'.
13. If you receive 'CHAP authentication failed', close the 'connection status' window and click on 'Basic settings'. Check the login and password for ISP and apply the setting again.
14. Open up another browser window and try to access internet.
I hope this information allows you to resolve this issue.

If I have helped you, please help me, and rate this suggestion the highest FixYa rating. If you cannot rate this post with the highest rating, then please comment to this post and I will try to help you further.

Regards
Anand

You get the network key from the supplier of the router. Read the manual if this is you.

You get the network key from the supplier of the router. Read the manual if this is you.

1. From the Start menu, select Control Panel.
2. In the Control Panel Home window, click on .
3. Double-click on .
4. Select .
5. A list of wireless networks within range will be displayed. Choose your wireless network from the list and click .
6. If security is enabled on your wireless network, enter your wireless and click OK

If you do not see your wireless network displayed in the list :

1. Check that the PC has wireless capability, and that it's wireless is enabled. Many laptops have a physical switch or button for turning wireless on and off.
2. If your wireless network is configured not to broadcast it's presence, for security reasons, this article may help : How to manually add a wireless network in Windows 7 and Vista.

First call your ISP and make sure your acct is update ($$$) sometimes they disconnect if something is wrong with your acct. Also they will help you to resolve any issues. Finally get here again!