20 Most Recent NetGear WG602 802.11g/b Wireless Access Point - Page 6 Questions & Answers

Check the Ethernet wire's connection between your modem and router.Check all physical connection..Hard reset your netgear router.**If you need any kind of technical assistance you can contact support cell at http://www.vtechsquad.com/

The 7550 Modem Router was sold directly to AT&T ISP and came with no support. These units were somehow now available in retail channels. These units should come in a brown box. NETGEAR does not provide any technical support support for this model. Please refer back to the reseller for any warranty and support options available to you. NETGEAR Support Answer No NETGEAR support for the AT 7550 Modem Router You need to go to AT&T for support and how to bridge this modem.

There is a WiFi switch, press it and hold for few seconds. The LEDs will come up

I have had this exact same scenario with my provider of service, the promised speeds are a joke and vary with the time of the day and the amount of usage, it is a big scam and the Feds should crack down on these companies. As far as solutions go, none that can help exist until the government gets on them and fines the kajebah's out of the companies doing this.

press the wps button and will come up to pair

press the wps button and will come up to pair

Might have a issue with the wireless. Suggest you connect both with ethernet. Using a netgear genie verify connectivity

Please start over following the instructions at http://kb.netgear.com/25716/How-do-I-install-the-WN3000RPv3-as-an-Extender

If you do not know the password and are wanting to reset to out of the box settings Power on the Router wait several seconds Hold down Reset for 5 to max 8 seconds ! ** connect to 192.168.1.1 flash the initial FW now the Router reboots wait several seconds Hold down Reset for 5 to max 8 seconds ! ** ** After every reset, the first login screen on StockFW should show something like "refreshing settings or loading settings" Now its like Out of the Box.

can you plz attach the image file to your question

go into the router page by typing ip address of router on left hand side panel u will find firmware by clicking on it u will get new window in that u will find firmware update

May be problem with your smart phone try to connect other phone

Netgear does not seem to have this model.

Windows OS user can speed up internet up to 20%. Actually windows reserve this 20% speed for update and other purpose. You can get back this speed. To know more, visit : Increase your internet speed up to 20%You may speed up internet using public DNS server. To more detail, visit : Speed up internet by DNS setupTo know more about computer, internet and mobile phone tips, visit : 001 Easy Tricks

Admin may not be a permissible username as many companies ship theirs set as admin. Try a different user name.

Most routers have a small hole in the case that has a reset button just inside it. Use an extended ballpoint pen or a straightened out paper clip and push and hold the button in for about 10 seconds. That should reset the router to its store bought configuration. Note: some routers require that you hold in the reset button while you turn off and then back on the unit for it to reset. Hope this helps.

R6300v2 Product Support NETGEAR This page has all the information you need.

Keith, try another channel. Often times default channel on the router interferes with other devices in the environment, even up to 1/2 mile away. Channel change almost always solves it.

username:-admin password:-password if its not working reset the router user them again skype id :- [email protected]