Top 20 Lexar JumpDrive Classic Portable USB Data Storage Device, 128MB. (PD0128231) Media Questions & Answers

To remove write protection: Open Start Menu >> Run, type regedit and press Enter. This will open the registry editor. Navigate to the following path: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\StorageDevicePolicies Double click the key WriteProtect in the right pane and set the value to 0 In the Data Value Box, press OK Exit Registry, restart your computer and then re-connect your USB pen drive to your computer.

click start click on my computer you should see your usb drive right click then select format another way is to control panel administrive tools computer management disk management right click on your drive select format hope this helps

You have to be the computers administrator to change any values on any hard drive on your computer

click start control panel user accounts on the users tab click the name of the computer administrator you must have full control

click start click to open on my computer you should see your usb drive could be E: or something right click select properties there will be an array of options

select the sharing tab option then advanced sharing make sure you have a tick in the share this folder box

then click permissions make sure you have all 3 boxes ticked full control changes and read in windows 7

click start control panel user accounts click on the administrators account if you have made one or you will have to create one in windows XP click start right click on my computer select openRight click the icon of your usb drive (It should be E:/ or something) Click Properties in the menu that comes up Click the Sharing tab Click permissions And finally, click Allow next to Full Control. if you need more help with this post a reply hope it helps

you might not have saved it in a specific folderclick start type in the name of the file press enter this should locate the file folder in w7click start search in xp or you might try downloading the file again you should get the option to save as a browse option will open select the specific folder in my documents or a usb drivehope it helps

You're looking for the option to "Format" the flash drive. Plug it in to your computer, and depending on the operating system, you're going to click Start > My Computer or Compute > Then right click on the Flash Drive, it should be listed on the left hand side of the screen. Find the Format option and select it. That should delete all of the files.

Hi.. You might check to see that the external drive is actually powered up, does it need to plugged into power or is it USB connected. Try a different USB port. Go into start settings system device manager and see if the USB ports all come up ok, or if there is a yellow ? Question mark, meaning that the system isn't recognizing one or more f them (And, if that's the case, you probably need new USB drivers on the PC.. - unplug the USB device, tell windows to update the driver (or delete the bad device and reboot - windows should rebuild the USB device ))

Worst case, take the drive to a computer repair place and tell them you want to get the pictures off the drive. Unless the drive itself has died, should be able to get photos off it.

Hello,

Please try to use the HP USB Format Utility tool to format your USB Flash Drive.I've personally used it on even the most stubborn flashdrives.Check it out!
Download it from CNET from http://download.cnet.com/HP-USB-Disk-Storage-Format-Tool/3000-2094_4-10974082.html

Thanks and welcome.

Yes, the memory chip inside it is fried. There's nothing you can do, junk it and buy a new one.

Hi,

The procedure for removing the right protection is given in the website given below.

please follow the directions and you can remove it.

http://www.troublefixers.com/remove-write-protection-on-usb-pen-drive-or-memory-card-or-ipod/

Thanx

drag them from your pc to jumpdrive

hi

go to folowing link you will have your solution

http://www.troublefixers.com/remove-write-protection-on-usb-pen-drive-or-memory-card-or-ipod/

vote me if u have your solution

No driver needed, when plugged in it should just appear in My Computer. If it doesn't that means the memory stick is dead, junk it.

File system error - format it the slow way in a different system.

it is software problem put on other system it will work

someone set all the files to be protected

you can protect any or all files with a password
Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/sean_54c3a3dc48a7773c

Files on a flash drive can be corrupted if it is not removed from the USB port properly.
Before removing the flash drive click on the Safely Remove Hardware icon and then click on the flash drive you want to remove and then remove the flash drive when the computer message says it is Safe to remove.
To restore the flash drive you may need to format the flash drive, but you will lose the data stored on the flash drive.
If you need the data on the flash drive these WEB sites may help: -
Data and Digital Photo Recovery
www.artplus.hr/adapps/eng/dpr.htm
www.CardRecovery.com

ok
try
these steps:
1.plug your pen drive 32gb in your computer.
2.then open Control panel.
3. open administrative tools.
4.open Computer Management
5. a window label computer management will appear.
6. click disk management
7.locate you pendrive and select delete partition or format it fat 32 or other format convenient for your usage.
ok
hope this will help
cheers
uttam

Test the USB on a different computer, PC or Mac.If the stick is working on a different computer, remove mac battery (if macbook) and unplug mac from power.This can fix problems related to electrostatic charges on USB connectors.If that does not work, then the USB is corrupted.You may have lost your data, If memory is not even detected by Mac and computers, then the recovery software does not work.free usb recovery mac osx downloadMac data recovery software

Have you tried putting the flash device into another USB port? That will help me see what the problem might be.

Ryan Frame
Creative Energy Associates Technical Center

GO IN THE LEXAR WEB SITE AND DONWLOAD THE SOFTWARE FOR FORMAT THE DRIVE AND SEE IF WILL WELP