If you are running Windows XP or higher as your version of Windows then there is no driver needed as the drive has native support in the operating system.
If the drive is not showing up you may need to double check to see if you just need to resign the drive letter for the drive. If the drive is not showing up in disk management then this coudl be a sign of a problem with the drive its self.
All full size CD-ROM disks should hold .680 GB of data.
That's *POINT* 680, or 680 MEGA bytes, which is LESS than 1 GB.
The capacity of some CD-ROMs may be slightly more 700MB or so (the capacity is usually stamped on the label), and of course the mini CD-ROM disks hold significantly less.
Check if the drive is detected in the Bios.You can get there by hitting F2 on the startup.Try reinstalling the primrey and scondry channels from the device manager as well.Incase it is still not working than you might have to get it replaced or reinstall the wiindows.
re-attach all the cables correctly and try again.If it still doesn't work take it back to shop/technician or buy a new one,if you open it up you will nullify any warranty you might have. hope this helps.
If you have other Optical Drive in your computer like a CDwriter then installed it where that LG 52x CDROM drive. Observe if the same problem occur after 2 or 3 hours.
Try connecting the CDROM drive to the IDE ports (Secondary IDE port) like setting its jumper to Master.
Ensure that the connection to its power supply is firm.
Change the setting of your POWER OPTIONS which is under the CONTROL PANEL and change the setting for TURN-OFF HARD DISK to NEVER.
Full 'make model (what it is)' in all questions please, first 3 words.
Capacitors can split or bulge, resistors can burn,, the transformer can fail internally..
Take it for repair unless you have the thousands of dollars of test equipment and have do the 2 year electronic course.
A communication error has occurred between the outdoor and indoor units. Faulty wiring or a malfunctioning control unit may be responsible. Contact LG customer service for assistance. Their number is 1 800 243 0000.
You will need to connect a single HDMI cable from your sound bar to the HDMI ARC or the HDMI eARC port on the Roku T.Make sure that both of the devices are both turned on.When your TV detects the sound bar,it will then automatically initiate the setting up process. Lastly follow the easy on screen instructions to finish setting up the connection.
If your LG 55UM7300PUA is not powering on, there are a few things you can try to troubleshoot the issue. 1. Check the power cord and make sure it is securely connected to the TV and to the wall outlet. 2. Check the wall outlet to make sure it is working properly. Try plugging in a different device to the outlet to make sure it is providing power. 3. Check the power button