Top 20
Fisher and Paykel DD60DHI6 Dishwasher Questions & Answers
Hi, how do I fix error code F1 of a fisher & paykel draw dishwasher??
The F1 error on a Fisher and Paykel dishwasher means the flood switch was activated for seven seconds or longer. ... The dishwasher's flood switch could activate because the water is leaking around the heater plate. It would still eventually show up somewhere, though a leak like that would kill the heater plate too.
11/5/2018 12:42:28 AM •
Fisher...
•
1,141 views • 1 helpful votes
Fisher packed dishwasher dd603
If the panel display on the lower drawer is lit and you can select the program then most likely the water inlet valve is fault and needs replacement. But if the panel is dark and none of the buttons operate then the power to the drawer is cut off. This can be due to a number of reasons including the power board at the base loosing one power circuit or the thermal fuse in the drawer is blown. Please provide model number of dishdrawer unit and also please describe what is actually happening.
3/7/2018 12:40:35 AM •
Fisher...
•
93 views • 0 helpful votes
What is f1
Means that there is water in the base pan below the bottom drawer.
6/13/2017 9:01:10 PM •
Fisher...
•
48 views • 0 helpful votes
Not finding what you are looking for?