20 Most Recent Packard Bell 1580509280 Network Adapter - Page 9 Questions & Answers

Hi look for a FN + some key (F3-F12) combination to turn the touch pad off, there can also be a button next to the power button to switch touchpad on and off. You can also try to disable it using windows itself by right clicking the touchpad software (by the system clock )and in it's settings look for an option to deactivate the internal touchpad. Hope this helps.

Hello Does the whole keyboard not work or only some keys? Try the following shut down the computer , disconnect the power cable and remove the battery from underneath then press power button for about 20 seconds then reconnect the battery and the mains power and switch on the laptop again. Did you spill any liquid on the keyboard?

If you have already tried Packard Bell on line, you could try Amazon.com they have a lot of manuals. Hope this helps.

Try reformatting your computer 'coz maybe your operating system is corrupted. If your afraid to lose your files, use different hard disk to install your new Operating System, then after installation,, copy all the files from the old hard disk to your new one by connecting it both to your computer and selecting your new OS in boot menu to start.

You can follow this steps: * Enter wrong password 5/6 times. * You should see a system disabled screen. * Your system disabled screen will show a error code, ex: 07347 * Now go to biospw.org, enter the error code. * The site will generate you a master reset code from which you can reset the bios password. *** Some laptops doesn't support that method.*** You can find further information in this link: http://dogber1.blogspot.com/2009/05/table-of-reverse-engineered-bios.html Dogbert Blog

get new laptop

Download ''ComboFix'' software and install and run it. (Make sure antivirus, if installed, is TURNED OFF before installing and running the program). You can download it directly from www.combofix.org. It takes quite some time to run and ''do it's thing''. Your laptop will appear ''frozen'' for a while. Just LEAVE IT ALONE. Let the program do it's job, and you'll be a very happy camper when it's all done. Afterwards, assuming you do not have an antivirus program (or not a good one). Uninstall whatever bad antivirus program you are currently using and install ''Security Essentials'' (free from Microsoft). // NOTE: Before installing ''Security Essentials'', but _after_ running ComboFix, (assuming no other antivirus is running... if so, disable it)... Run ''System Defragmenter.'' You'll find it inside the ''System Tools'' Folder, which is located inside the ''Accessories'' Folder. After the defrag is done, install Security Essentials (assuming you have no antivirus and/or you've uninstalled it). Then you'll have your computer back to ''spiffy'' quick. // Ps... The first time you run a scan on Security Essentials, have it do a FULL scan rather than a ''quick'' scan (which is a good enough setting for routine scans later on).

how to open compute cases video

Hello! If you want to remotely control your laptop, I would recommend using TeamViewer. It is very popular and used among many to remotely control your laptop from anywhere in the world. In order to remotely control your laptop, you have to install TeamViewer on both systems (also works with SmartPhone to Laptop) and then after you have installed it, get the address and password from the laptop you want to control and then connect it with your other system that has TeamViewer installed. TeamViewer must be and the system must be connected to the internet for this to work. Thanks for reading, and I hope I have helped!

What language setting are you trying to change?

check mouse pad settings on control panel , it may have been set for an external mouse, if all settings are correct, you have a faulty touch pad directly from supplier, send it back and have it replaced.

http://www.ecs.com.tw/ECSWebSite/Support/Technical_Support_List.aspx?MenuID=50&LanID=0

It is easy to determine this shutdown your pc diconnect the power from the mains & the computer open you computer case and have a look if it is a this wide ribbon looking cable then it is an IDE if it is a thin cable with a small plug it is SATA.

try http://www.packardbell.com/pb/en/GB/content/download

Wait till it is finished.

I assume you created a windows account while logging in for the first time. (Something like [email protected]) and you pc was connected to internet at that time. If so, you can go mail.live.com on another computer and try recovering your password. Re-installation of windows is last option but you'll probably lose all data on your device. Good Luck!