20 Most Recent Packard Bell (030069) Sound Card - Page 3 Questions & Answers

Hi, try the Realtrek AC97 sound driver, its free to download from a google search.

First thing to do is update the sound card drivers. You can get them from microsoft or the sound card manufacture's website.

Another thing you can do is go to control panel, system, system devices and find device manager, see if you sound card is listed there on the list. Check that it is enabled.

Also check your sound card properties and make sure the wave is turned up along with the volume. You can right-click on the speaker icon on your pc to get to the sound properties.

just go to the below link, and download drivers detective, it will automatically detect drivers from internet, and you can hassel free install it.

note: you require WINRAR software to unpck archieve

http://www.megaupload.com/?d=5V355FUL

http://www.driverstart.com/start667234.html

Go back to where you purchased it.

> try to used the installation cd and boot from disc

This information is intended for experienced users. It is not intended for basic users, hackers, or computer thieves. Please do not try any of following procedures if you are not familiar with computer hardware. I'll not be responsible for the use or misuse of this information, including personal injury, loss of data or hardware damage. So use it at your own risk.

A. By Using the Motherboard Jumper:

In most motherboards CMOS battery is soldered, which makes it difficult to remove the battery. In this case we use another method.

Almost all motherboards contain a jumper that can clear all CMOS settings along with the BIOS password. The location of this jumper varies depending upon the motherboard brand. You should read your motherboard manual to check its location. If you don't have the manual then look for the jumpers near the CMOS battery. Most of the manufacturer label the jumper as CLR, CLEAR, CLEAR CMOS, etc.

When you find the jumper, look carefully. There will be 3 pins and the jumper will be joining the center pin to either left or right pin. What you need to do, is remove the jumper and join the center pin to the opposite pin. e.g. if the jumper joins center pin to left pin, then remove it and join center pin to right pin. Now wait for a few seconds and then again remove the jumper and join the center pin to left pin.

Make sure to turn the PC off before opening the cabinet and resetting the jumper.



B. By Using Software:


I have found that BIOS/CMOS Password Recovery Tool is the most effective.:
BIOS/CMOS Password Recovery Tool is a program that works instantly to remove any lost or forgotten BIOS/CMOS password. Simply boot your PC to DOS and execute the program, and get access to forgotten BIOS/CMOS passwords in just seconds

BIOS/CMOS Password Recovery Tool Service: http://www.biospasswordrecovery.com/

I need driver. Creative Model: CT4730

...my friend may be you dont have the driver of the sound. You need to have a driver of sound in order it works. Thnx

Usually you can press the left and right mouse buttons at the same time on a laptop to act as a center button.

Hello snakeeyess, you can go to this website, driverguide.com. this website needs you to sign in, and after you sign in, browse for your sound card driver, just jot down the make and the model.

Greetings,

May be you do not have sound drivers installed on your computer. I beleive updating the drivers would resolve your problem.

Visit the following link and download
the sound drivers again on your system:

http://download.cnet.com/Realtek-AC-97-Audio-Driver-XP-W2K-W98-WDM-driver-VER-5-10-0-
5554-zip/3000-2110_4-210198.html

Please feel free to reply in case you face problem.

Request you to grade my answer in case you find it useful.

Have a nice day !

Regards,
Ask_Aby

check the sound effect first,...is it on "none" effect ? if yes try to resoldering the connection point on sound card by solder. good luck

Well, first restart your computer and see if it does the same. If it does follow the next steps: -right click on My Computer; -Manage; -Services and Applications; -Services -Look for the services that contain audio in their name and especially for Windows Audio. Right click on it. Go to Properties and check the start up method. Put it to automatic. Stop and Start the service again.
If you need further assistance, leave a comment. Cheers

Check the audio control panel, and make sure all the other input sources are enabled.

1. Check if you have sound card this can be PCI or embedded.
2. Check if you have sound card drivers installed. If not then install it and it will work.

or you could try buying speakers for a much ideal sound

try getting sound drivers for that sound card

this is a standard issue know to MS and they r not giving any patch to get this rectified...
what i did is
buy a 1$ USB Sound adaptor, connected to one of the USB ports and connected the speaker jack to the outlet in that....sound is back thru that
google and look for "USB Sound Adpator"
for more detials visit my site
www.sureshayyar.110mb.com