Top 20 Questions & Answers

we also need more information to try to pintpoint the problem | 362 views | 0 helpful votes

Any issues with the water "uptake" to make the ice? Is it making ice & they just won't come out? Is the dispenser clogged? If you can provide a little more detail...better able to it making whirring noises (which would indicate the electrical is fine, but there's a jam or something). | 314 views | 0 helpful votes

Try unplugging it for 5 min. | 221 views | 2 helpful votes

OK this may sound to simple. First check make sure that the softener has a good steady power supply. Check make sure it's plugged in. Then check the electric supply box...the fuse box and see if you may have tripped a breaker or a fuse. The softener should have a red or green light if you have power. Red light display means that the softener is in error protect mode a lot of times your timer needs to be reset like extended period of loss of power. ..but usually provided you have power without any outstanding issues. ..just unplug unit for 5 minutes the repower it up by simply plugging it back in | 112 views | 0 helpful votes

I've posted on this subject before. Your washer will not cycle correctly if there are any restrictions in the pump and this usually means that during doing the wash things have been transferred from your clothes generally the pockets. ..These things usually get lodged in the pump. When the washer enters the spin cycle the pump kicks in and pumps out the excess water. If you can get the back off the washer you will see a semi - round object that is usually white with 2 hoses coming out of it. One hose is the water in let hose the other one is attached to the drain hose that goes into the sewer drain outside of the washer. Make sure that the washer is unplugged then remove the hose that goes to the outside drain. Now with a flashlight look inside of the pump and see if you can see any debris or foreign objects. If you see anything in there you will have to remove these things through the hole where the hose connects. After removing debris replace hose inspect the surrounding area for obvious reasons why the washer may have stopped like look to make sure that the belt on the drive motor is ok. With no other signs of problems replace the back of the washer andplug it back in and try to sstart the washer just like you were just starting a new load of laundry. G | 223 views | 0 helpful votes

Go to your local hobby store ie:Michaels,Hobby Lobby, sometimes they have business card boards of people that can help you. | 222 views | 1 helpful votes

You probably bent a blade into the deck. Its possible that something else is wedged in between the blade and deck. You can set the front wheels on a block and look under the deck. With mower off and blade disengaged, see if blades turn freely. Check each blade seprately. | 137 views | 0 helpful votes

Edgewise Media
630 9th Ave # 800
New York, NY 10036 | 92 views | 0 helpful votes

here are instructions for a Kenmore, of course they may not apply to your model, but then you haven't specified your model so it is difficult to help!
do let us know if they work
Press "Clock."
Enter the time using the number pads on the right-hand side of the clock display.
Press "Start."
Press and hold down "Clock" for six seconds, until "CLO" disappears and "12hr" or "24hr" appears on the display. Press "Flex Clean" to choose between the 12-hour or 24-hour display. Press "Start." | 170 views | 0 helpful votes

Most refrigerators have the opposite problem with little kids pulling the door open then walking away leaving the door open. You can resolve this issue by raising the refrigerator up slightly. .it's helpful to have 2 people for this task. On the front of the fridge on each corner or there of. There are a adjustable leg and by adjusting the leg in you will change the level of the fridge. The farther they are turned out the fridge will lean back and that will with the force of simple gravity make the door close on its own without any help the further in the legs are turned the fridge will lean towards the front. But with some help you can make the cabinet of the unit perfectly level then when you open the door it will stay right where you leave it | 78 views | 0 helpful votes

This behavior is a feature of the Security+ door openers. It can be disabled via the control console:

Lights will also turn on when
someone walks through the open garage door. With a
Premium Control Console, this feature may be turned off
as follows: With the opener lights off, press and hold the
light button for 10 seconds, until the light goes on, then
off again. To restore this feature, start with the opener
lights on, then press and hold the light button for 10
seconds until the light goes off, then on again.

Those are instructions from page 30 of the manual of a similar, if not the same, opener: | 186 views | 2 helpful votes

Hi Debbie,

Most problems with gasoline powered equipment are related to the carburetor. This happens frequently if this equipment is not stored for the "off season" properly. Fuel remaining in the equipment can form varnish that will interfere with movement of carburetor's internal parts, clog the tiny orifices, etc. Often, disassembly and through cleaning with solvents and clearing clogs will return the engine to good running order with little to no need for replacement parts. Making adjustments to the screws and springs on the carburetor is looking for trouble - don't do it. The carburetor is a simple device - but has some pretty small parts that are easily lost of you're not expecting them to fall out during disassembly. Your best bet is to have the mower serviced by a pro. If cleaning is all that is required, it shouldn't cost more than $50 - $75.

You can save yourself this headache next year by either running the engine until it is out of fuel - or removing any fuel from the tank and then run the engine until all remaining fuel in the lines and carburetor has been used completely. This is a good time for an oil change and maybe even a new spark plug. If you didn't do it last year, you might want to have the pro do it for you when he works on the carburetor.

Good luck! | 124 views | 2 helpful votes

Does it show a faulty code. Where the sound coming from.
Does it show a faulty code. Where the sound coming from.
How long did you have the unit. Do you have a problem with water or ice. Have you ever cleaned condensor? | 74 views | 0 helpful votes

The 1F error has nothing to do with the water filter. It means that the fan isn't spinning properly. This is the fan in the freezer. The problem could be a build up of ice or a failing fan or a problem with the motherboard. Some with the error can hear the fan spin for 15 seconds and then stop.

If you add a comment with the model number of your refrigerator, I should be able to able to direct you to the parts list. If the problem recurs after you defrost the fan, you'll need to replace the parts. Unfortunately, it's impossible to determine which part is bad. The usual solution is to replace the fan and then the motherboard if the error recurs.

I hope this helps.

Cindy Wells | 139 views | 1 helpful votes

Should be a control dial up inside near the light. | 77 views | 0 helpful votes

belts too tight,1. pully out of round or warped,2. bad pully bearing,3. incorrect install,4.wrong belt ,5. lol. | 122 views | 0 helpful votes

Not finding what you are looking for? Logo

544 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Computers & Internet Experts

Cindy Wells

Level 3 Expert

6186 Answers

Brad Brown

Level 3 Expert

18455 Answers

Paul Bade

Level 3 Expert

1666 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular Computers & Internet

  • Computers & Internet

Most Popular Question

hang rug wall

  • Computers & Internet