20 Most Recent Samsung BD-P1580 Blu-Ray Player - Page 7 Questions & Answers


possible digital input but you have to go into audio and activate it

Samsung... | Answered on May 01, 2020


check input or source if ok check voltage from power board if ok bad screen if no bad power boards

Samsung... | Answered on May 01, 2020


bad power board

Samsung... | Answered on May 01, 2020


if input and source ok check picture settings if ok and power from board bad screen

Samsung... | Answered on May 01, 2020


check input or source if ok check picture settings

Samsung... | Answered on May 01, 2020


have to change settings in ipad and also tv picture settings

Samsung... | Answered on May 01, 2020


If you wish to get some details; check the site linked here. Pull up older posts. http://electronicshelponline.blogspot.com/
Line, faults & possible causes to LCD screen are given with illustrations. You can get an idea about the fault to an extent.

Samsung... | Answered on May 01, 2020


If you wish to get some details; check the site linked here. Pull up older posts. http://electronicshelponline.blogspot.com/
Line, faults & possible causes to LCD screen are given with illustrations. You can get an idea about the fault to an extent...

Samsung... | Answered on May 01, 2020


need a meter to test whats failing

Samsung... | Answered on Apr 30, 2020


Back - light problem. Check and replace damaged component/s at its back-light inverter board, or replace this board as card basis. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. It will be best to replace the inverter board as card basis.
http://electronicshelponline.blogspot.com/
To some model sets; especially LED back-lighted types; the back-light inverter circuit will be part of the main power supply board [SMPS]. In such cases, the power supply board might need replacement. To some models sets, the back-light inverter and SMPS section circuit will be integrated at its main board itself. If so; the main board should be replaced. To some models of sets, all these section circuit will be integrated at its main board. If this is the case, you have to replace the main board.

Samsung... | Answered on Apr 30, 2020


This explains why, and why you can't diagnose television problems on an online forum. The television sections are really only for help with manuals and remote codes.

Here are similar questions that we see often.
Question:

I've replaced everything in my television because it previously had a black screen with no lighting. Now it doesn't turn on at all and all I have is audio. What could be the cause ? Or

Turns on and sound works fine, but the picture is distorted (solarized? polarized? not sure what the term is) I replaced the main board, but that didn't fix it.
Or

I have an LG 55LM6200-UE with a dim lower-left. I just replaced both LED strips with no resolution. There is no physical obstruction visible, so this has to be a cable or board problem, right?
So your television stops working properly and you think it must be easy to fix, because you can buy boards on eBay, and you can watch YouTube videos. So you make a decision, you buy a board and you fit it, but the television still doesn't work as it should! This is a classic case of the 'let's try replacing this' method of television repair and illustrates why it is a bad idea. It doesn't work for a number of reasons. To correctly diagnose issues, you need to know every board, what it does and every component on the board. You need to know which part has failed, replace the component, or replace the board. The parts you purchased off eBay were probably out of scrapped sets and not tested. The part you put in was dead when you put it in, so you just moved on to another guess at what might be the cause and replace a board that is fine. And so it goes on, you change all the boards and it still doesn't work. Did you notice the large print that says 'NO Refunds, NO Returns'. This is to stop you sending your old one back and saying it didn't work, but the unscrupulous sellers use it as an excuse to get money for selling items that may, or may not work! The course to be a television engineer is 2 years full time education, take it to someone that knows how to diagnose and fix. It is by far the cheapest option. The part that failed might be a 20 cents fuse diode hard soldered to a board. They will charge you $5 in parts and a couple of hours labour. It's not the fix you want to hear, but it is the best advice.
Andrew - Fixya Moderator

Samsung... | Answered on Apr 29, 2020


A) As linhas est?o se movendo ou tremendo?
Geralmente ? causado por um cabo de v?deo solto ou com defeito. Verifique se o conector est? firmemente encaixado nas duas extremidades. Se as linhas permanecerem, substitua por outro cabo.
? importante que voc? use cabos de boa qualidade e verifique se o monitor e o dispositivo externo suportam a op??o HDMI. Se n?o for compat?vel, escolha o tipo DVI ou VGA.
Mas se voc? tiver verificado todas as op??es acima e as linhas persistirem, entre em contato com o Suporte t?cnico para solicitar uma avalia??o.
B) As linhas n?o se movem ou parecem estar paradas?
Esse tipo de falha precisa ser avaliado por um t?cnico certificado pela Samsung. Entre em contato com a Assist?ncia t?cnica para solicitar uma avalia??o.

Samsung... | Answered on Apr 29, 2020


This issue is usually caused by a bad power supply but it can also occur in some cases due to a glitched HDMI link.

Samsung... | Answered on Apr 29, 2020

Not finding what you are looking for?
Samsung BD-P1580 Blu-Ray Player Logo

10 questions posted

Ask a Question

Usually answered in minutes!

Top Samsung Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76407 Answers

Muntejaya Ginting
Muntejaya Ginting

Level 3 Expert

10422 Answers

Ekse

Level 3 Expert

13434 Answers

Are you a Samsung Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Samsung Televison & Video

  • Samsung Televison & Video

Most Popular Question

player wont play blue ray discs but will

  • Televison & Video
Loading...