Magnavox MDR513H/F7 Player - Answered Questions & Fixed issues

My unit was dead also.....So I checked outlet first...It was good....Then I tried the 10 minute disconnect and reconnected unit......Saw Unit had power on LCD screen....Hit ON button on remote after changing to HDD and unit works perfectly again....That fix saved me 75 bucks for repair center to do same thing...Glad Funai makes units that shut off before damage occurs...Unit just needed to cool down hard drive or circuitry before it sensed it was ok again....When plugged in it is still technically powered even tho you dont see it on the LCD screen of the unit...

You can replace the fuse (if the unit is not under any warranty) by carefully opening the top cover - the fuse is a small glass tube in the power supply (near where the cord connects) check its rating and voltage (the replacement MUST match the original). You should be able to reach this easily without further disassembly of the unit.

If replacing this inexpensive part does not restore any power to your unit, then you have a faulty/defective power supply circuit - this should really be tackled in a fully equipped workshop with adequate facilities by a qualified technician; it is not meant for end-users to repair when it fails due to the potential dangers involved. Experience suggests in many cases a dead unit is not just a blown fuse, but a switchmode power supply failure.

Try replacing the fuse first - then consider submitting unit to a service centre for a quote, then you can decide afterwards if it's economical/worthwhile repairing.

It may be that or the supply is not being turned on internally--considering schematics usually do not exist for this kind of equipment unless this is an expensive unit it is usually better just to buy a new one.

Then just use +r or +/- r. You DVD player is not compatible with +r

Hi,
No,it is not necessary to return it..
As far as I explore it ,this feature is user adjustable ..Have you gone thru "user manual " ?
if you need a soft User Manual in PdF format I have a copy of " "..H2160MW9 HDD & DVD PLAYER / RECORDER WITH DIGITAL TUNER " *another version of yours..
if you like I can forward to you too..just give me your e mail..thats it..

Take care..Regards

Unless the power supply is a multi-system* type, the unit will not work in Australia without major modifications to suit the mains voltage. The differences between USA and Australian voltages are significant. We use a higher voltage rating for appliances than America does, and appliances made for Australia operate at around 220-250V AC.

In order for it to function correctly and safely in Australia, the power supply would need major modification, which can prove expensive, and often impractical.

With a Magnavox, you just buy a new television. They are not good quality and that model is only 720P. Old tech. https://www.google.com/search?q=Magnavox+22ME601B%2FF7 ..

See this link for help https://www.magnavox.com/en/index.php?controller=attachment&id_attachment=893

See troubleshooting section of user manual for help Others; Troubleshooting - Magnavox MWR10D6 Owner's Manual [Page 73] ' ManualsLib

it does not have one. You cannot directly connect VGA to composite or svideo since they are two completely different and incompatible signals. However, you can use a converter like PID# 4724 or 4722 to actively convert between these types of signals. google s video to VGA apater

Try pressing the Source button on the Remote and run through all the Input options. You can also try a full Power reset. Disconnect the power to everything for 5 minutes including the router. Plug back in, wait 10 minutes. Switch television on and try again. ..

Your question is lacking in details. You have an unknown make of VCR or DVD and you want the Magnavox television to operate them? Or you want the VCR and DVD remote to operate the television. Or you want a Universal Remote and a magic code to make all three work? The answer to all three is No, apart from number 3 where a very expensive LCD computerized remote can control multiple items. No one uses Universal remotes, there are better options. Codes are based on the MAKE of the unit to be operated, so Philips DVD you want a Philips DVD remote code. For the Magnavox, you want the code for a Magnavox television IF in fact it is a television and not the VCR/DVD, which now I am thinking is actually what you are after, so we end up here! https://theproductanalyst.com/magnavox-dvd-vcr-combo-remote-codes/ But better to buy a remote actually made for that unit as explained here. https://www.fixya.com/support/r29872378-universal_remotes_no_facsimile_remote ..

Visit the following page. It will help you. RC: Programming Your Magnavox Remote Control (remotecentral.com)

To program your Magnavox DVD VCR combo using the Magnavox CLO358 universal remote, you can try the following codes:05030675115312031321Here's how you can program the remote:Turn on your Magnavox DVD VCR combo manually.Press and hold the "Code Search" button on the remote until the indicator light turns on.Release the "Code Search" button.Press and release the mode button for the device you want to program (in this case, the DVD VCR combo). The indicator light should remain on.Enter one of the codes listed above using the numeric keypad on the remote. The indicator light should turn off after entering the code.Aim the remote at the DVD VCR combo and press the "Power" button. If the device turns off, the code is correct. If not, repeat steps 4 to 6 with the next code on the list.If none of the codes work, or if you have any other issues, it's recommended to consult the user manual of your Magnavox CLO358 universal remote for additional instructions and a complete list of codes.

It is a known issue

My vcr has a trouble code of E1 what does this mean

JustAnswer https://www.justanswer.com > Electronics Question Nov 26, 2018 - That error code very generally means that the signal input on the rear side of the VCR is not sensing any signal input. So the first thing to do ... 1 answer · Top answer: Hi, thank you for contacting JustAnswer.com. My name is***** will do my best to provide the ...

MAGNAVOX DVD/VCR ZV420MW8 error code E1

Fixya https://www.fixya.com > support > t14967799-magna... Nov 11, 2012 - "E1" is the display indicator the unit is looking for a External input signal or Line Mode. "E1" External input on the rear, "E2" External input ...

• magnavox dvd vcr e1 Questions & Answers (with Pictures)

  https://www.fixya.com > ... > magnavox dvd vcr e1 I'm trying to set up my new recorder It is displaying "E1" Hit the source button at the top of the remote to go to television, E1 is the input on the back of ... ..

No you can't do that. The DVD remote is single frequency. The only multi-use remotes are those that come with cable and satellite boxes, or high end universal remotes with an LCD Screen. The television remote may control another Magnavox device, but it is a budget make. https://www.google.com/search?q=Magnavox+NB183 https://www.google.com/search?q=magnavox+nb555 ..

Answered in this old post by myself and others. https://www.fixya.com/support/t26230450-magnavox_model_32me303v_f7_power_red ..

Is this with all sources?

There are 5 in the bottom link including Shop Jimmy, but only these two have boards in stock https://www.ebay.com/p/15020417049 and https://hardtechgroup.net/catalog/philips-313815868421-715t2014-main-board-p-24349.html https://www.google.com/search?q=Main+Board+313815868421 ..