20 Most Recent Elite Sl3000 1hp Slide Gate Motor, Receiver & 2 Remotes Questions & Answers

MY ELITE SL 3000 UL WILL NOT WORK WITH REMOTE. IT WILL WORK WITH THE LOOP. PROBLEM WITH BATTERY OR NEED TO REPROGRAM THE REMOTE, IF SO WHERE IS THE LEARN XMITTER LOCATED PLEASE HELP

Hi Mary, do you have more than one remote for the gate? Your remote needs to be paired with the gate receiver. Normally you need to push a certain button on the control panel to enable learning mode then you press the remote button you want to use. You will have to follow this learning process for your device. Please keep in mind that just any remote will not work with your gate, it needs to be on the same frequency and use the same modulation mode.
Hope this helps.

Elite Sl3000 1hp... | Answered on Nov 15, 2014

1 Answer

Hansa elite 24v swing gate motor won't open during morning hours..starts working after sun shines, what could be the problem

the back up battery has failed or is flat. It starts to work after sun up because the solar panel is feeding power to the system

Elite Home... | Answered on Apr 09, 2020

1 Answer

Elite roboswing R900 gate will not open, the unit produces clicking sound when I press remote control. What could be an issue?

I actually dont know the model.
Still i assume not opening is not moving at all? if you open the gate manually does it close?

The clicking sound tells me that at least one internal relay is beeing activated.

With that i would check the IR sensors first.

Then the motor conections and if there is voltage on them when you press the remote and the clicking happens.

The relay will close a circuit to activate the motor, (DANGER) since i dont know the circuit the relay could provide 12 volts up to mains voltage, if you dont have electrical/electronics knowledge dont do it, find a professional to do it for you.

If the motor gets power when the relay clicks could be the motor, motor capacitor (some motors work at mains AC voltage and use a big, normally white capacitor for startup) or the gear box, i've fixed a few garage door and gate systems just by dismantling the gear box, reajust and lubricating them.

Hope it helps
Regards

Elite Home... | Answered on Jul 06, 2019

0 Answers

I have an elite swing gate operator csw200 and the gate was stuck open what could be causing that

Elite Home... | Posted on Feb 26, 2018 | Be the first to answer

0 Answers

Elite SL3000UL. Am I correct,exit loop causes gate to open,vehicle in inside/outside safety loop holds gate open, gate closes after vehicle exits outside safety loop and then after timer times out.

Elite Home... | Posted on Jun 19, 2017 | Be the first to answer

0 Answers

I have a elite miracle one gate opener that only has 7-8 volts to the drive motor. transformer has 27 volts coming out into the controll panel any ideas

Elite Home... | Posted on Dec 09, 2014 | Be the first to answer

0 Answers

2 Answers

I have a Hyundai electronic safe. I changed the batteries in it now my combination code wont work...what ihave i missed or done wrong..or is there a factory preset that im not unaware of??

Yes there is a protocol method on a battery change, should be inside the lid or in the manual

Home Security | Answered 3 days ago

1 Answer

How do i factory reset my cobra surveillance dvr

Notify manufactured and give model to them

Home Security | Answered on Feb 25, 2021

Not finding what you are looking for?

3 questions posted

Ask a Question

Usually answered in minutes!

Are you an Elite Home Security Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Have a manual for Elite Sl3000 1hp Slide Gate Motor, Receiver & 2 Remotes? Or just drag it here!

20 Most Recent Elite Sl3000 1hp Slide Gate Motor, Receiver & 2 Remotes Questions & Answers

MY ELITE SL 3000 UL WILL NOT WORK WITH REMOTE. IT WILL WORK WITH THE LOOP. PROBLEM WITH BATTERY OR NEED TO REPROGRAM THE REMOTE, IF SO WHERE IS THE LEARN XMITTER LOCATED PLEASE HELP

Hansa elite 24v swing gate motor won't open during morning hours..starts working after sun shines, what could be the problem

Elite roboswing R900 gate will not open, the unit produces clicking sound when I press remote control. What could be an issue?

I have an elite swing gate operator csw200 and the gate was stuck open what could be causing that

Elite SL3000UL. Am I correct,exit loop causes gate to open,vehicle in inside/outside safety loop holds gate open, gate closes after vehicle exits outside safety loop and then after timer times out.

Miracle 1 elite gate opens on power loss. Can I change that to not open on power loss?

How do I change the code on my remote for my elite swing gate sgo--1v4

This Q206 board replaces the master-board in the elite gate opener

Where is the learn switch on my elite gate opener

Where is the learn button on my elite gate opner

Programming the remote in my car to a Chamberline Elite model sl 3000ul3

I have a elite miracle one gate opener that only has 7-8 volts to the drive motor. transformer has 27 volts coming out into the controll panel any ideas

Ramset gate adjustment

Crusader gate wiring schematic

All-o-matic won't close

How do I program a remote to open my All-O-Matic Sw-300

Remote key fob on code alarm dm1500 is not

How can you reach us for Ring doorbell tech support services?

I have a Hyundai electronic safe. I changed the batteries in it now my combination code wont work...what ihave i missed or done wrong..or is there a factory preset that im not unaware of??

How do i factory reset my cobra surveillance dvr

Not finding what you are looking for?

Ask a Question

Popular Products

Elite Sl 3000 Ul Sliding Gate Operator

Elite Csw200 Ul Swing Gate Operator Gate Opener Csw 200

Elite Dc2000 Csw Battery Back Up System For Csw200

Elite Gate Opener Sl3000 Slide Gate Operator Sl 3000

Elite Q206 RoboSlide Control Board

Top Elite Home Security Experts

Brad Brown

ADMIN Canada

ray gallant

Are you an Elite Home Security Expert? Answer questions, earn points and help others

Manuals & User Guides

Elite Home Security

elite sl 3000 ul will not work remote