20 Most Recent
Honeywell Access Systems OP30HON OP30HONR OmniProx HID Compatible, Mullion Reader (Replaces OMNI30, OP30SNA, 5365BGP00) - Page 9 Questions & Answers
How can i reset my kguard dvr hd881
To reset a Kguard DVR system, you will need to locate the reset button on the device. This button is usually located on the back or bottom of the DVR, and is typically labeled "Reset" or "Factory Reset". Press and hold the reset button for 10-15 seconds, or until the device powers off and restarts. This will reset the DVR to its factory default settings.
Change combination on a Saga safe #1100
If you don't have the combination for the safe, you can try to recover it by observation of the lock itself.
NOTE: I never recommend ANY lock disassembly as a DIY project for the same reason that I never recommend using locksmiths for most safe work. Lack of training, knowledge and tools can result in a very expensive lockout.
My recommendation would be to have a trained safe tech from a local safe company either recover or reset the lock.
DSC 832 PC5010 rev04 no power to keyboards?
Hi,
Please use a multimeter to diagnose the power flow through out your device to find out which portions have stopped functioning. If necessary, you might have to perform a factory reset in order to help get the keyboards online again.
Thank you.
Not finding what you are looking for?