Epson Workforce 520 Printer - Answered Questions & Fixed issues

0xF1 means there is a paper jam. Epson WorkForce WF 3520 All in One Printer

If you are using the Windows Vista or Windows 7 Operating System, please disable UAC Feature from Control Panel.You can Re-Download the Driver from the following link:http://www.epson.com/cgi-bin/Store/support/Supportdlsurvey.jsp?BV_UseBVCookie=yes&download=ftp%3a%2f%2fftp.epson.com%2fdrivers%2fepson13779.exe&pn=WorkForce+520&pc=Epson+WorkForce%26%230153%3b+Series&ft=driver&returnpage=%2fsupport%2fsupDetail.jsp&returnparams=%26infoType%3dDownloads%26oid%3d152503%26prodoid%3d63087903&licenseoid=17774 Enter your Email details go ahead with download process.Then install the Driver.

Hey, here's the whole process, step by step: Solved How To Reset Epson Ink Cartridges More info under: Gadget Preview

Yes, Turn the router upside down and write down the network name and wireless key.

Have you: 1. run a nozzle check? 2. run head cleaning? 3. done head alignment? Steps 1 and 2 are my first Epson fixup for your described problems.

Are there any error messages, or blinking trouble codes? The last piece of paper will sometimes jam or go in skewed, so perhaps it has a small piece of paper in the rollers. .

It is obvious that you didn't download the correct driver or if it is new, you didn't remove the packaging properly. Please check all the cable connections.

look carefully at where the color cartridges go in and there is a small color band for the correct cartridge position as each cartridge is colored , just match the colors and it will be right

re install your printer driver

Hi, try the following: Turn the printer off and wait a few seconds, then turn the printer back on. Push Menu. Push the arrow down key to get to "Maintenance" Trust this helps, regards Alan

simply check if there is some part of paper stuck inside also you should clean it from dust weekly or when its need

Look in the left side of the printer, you'll see some wheels Shut the printer down and pull the power cord manually rotate the wheels until the little lever that block the carriage moves When the carriage is unlocked, you are free to move the carriage. Hope the Best ADCSFXworks printing center

please click on the link and select your operating system and click on the download button.

To determine the cause of the issue, please do the steps indicated below.

1. Load a few sheets of plain paper in the product.
2. Press the Menu button.
3. Press or to select Maintenance, then press OK.
4. Press or to select Nozzle Check.
5. Press the Color button.
6. Check the printed pattern to see if there are gaps in the lines.
7. Do one of the following:
   • If there are no gaps, the print head is clean. Press 1 to select Finish.
   • If there are gaps or the pattern is faint, press 2 to select Head Cleaning.
8. Follow the instructions on the screen to clean the print head, check the nozzles, and repeat the process as necessary.

If you don't see any improvement after cleaning the print head up to 4 times, turn off the product and wait at least 6 hours. Then try cleaning the print head again. If quality still does not improve, one of the ink cartridges may be old or damaged and needs to be replaced.

Printer heads clogged, do 4-5 cleaning cycles. If that does not fix it get a new printer.

Bad printer nozzles, faulty cartridges and or ink.

Remanufactured cartridges have too many problems. I have be using refillable with auto-reset chips and never have a problem. Google- refillable cartridges and be sure to use the proper ink, dye base or pigment. It makes a difference.

i've SX130 EEPROM

Go To Below official EpsonPrinter Page For Your problem. How do monitor the ink levels on my Epson Stylus printer using Windows... Hope It's resolve all Your Printer Problem, Or Still having Problem Then follow Us For Epson Printer Support

Reinstall the software until you get it right. I had to do it 3 times before it printed a test page. My error for not taking my time.