Top 20 RCA RP3720 Clock Radio - Page 6 Questions & Answers

RCA or Phono type plugs only have a single pin plus ground and so one plug and lead assembly is needed for each channel.. It is important to match the output of the tuner to the input of the amplifier. This is easy if the amp has a dedicated tuner input but if it hasn't it is best to study the instructions, though at a push the line-in or auxiliary input might provide satisfactory reproduction.

No parts item discontinued.

Do not take it apart. Instead contact RCA and explain what has happened, including having lost the receipt. They should be able to see it gets repaired or replaced. However if you have opened it, that will break the warranty that came with the device, regardless of the shops policy. And RCA will charge you for the repair.

https://www.manualslib.com/manual/139437/Rca-Rs2653.html RCA RS2653 User Manual

It will work but the sound quality will be quite bad as the audio input is around 600 ohms and you have 8 ohms from the speaker output, you can build a crossover circuit quite easily for a few dollars

I have your manual here

Audio 1 audio 2 audio 3 on the back

There are lots of methods. You can resort to online music download website, chrome extension, or music download software. Follow below steps, to know the detailed information. Leawo Music Recorder is a super recording software to help you record various kinds of music from multiple sources like online music like YouTube, computer audio, and built-in input audio. The recorded music files will be saved into an output format of MP3 or WAV. 1. Run Music Recorder on your computer and enter the recording interface. Audio source should set firstly before music recording. In order to record the music from YouTube, we should choose the option "Record Computer Audio". 2. Click the red button "Start" to make Leawo Music Recorder begin to work. Then play the music on YouTube. You should note that the music recorder should work prior to playing YouTube music. If you want to decide the start and duration time of the recorded music, just click the icon button "Task Scheduler" then you can finish this customized setting as per your requirement. After the music has been recorded from YouTube, you can use Leawo iTransfer to move the recorded music from computer to your iPod Leawo iTransfer is a professional transfer program for transferring files between iOS devices, iTunes and computer. Various kinds of files are supported by this software such as music, apps and photos, etc. 1. Run Leawo iTranfer after you have downloaded the music on your computer. Connect your iPod with your computer via USB cable. The library of your iPod will be detected automatically and shown in the left sidebar of the window. 2. Import files to the software from computer in the following four-way: I. Drag and drop the music files into iTransfer directly. II. Click the button "Add" on the upper part which is beside the left sidebar. III. Click the button File > Add > Add File/Add Folder on the top right corner of the window. IV. Right click on the library and select Add File or Add Folder. 3. A pop-up dialog will be shown once you finish adding files and press the "Transfer" button. The name and the quantity of the transferred files will be demonstrated to let you know the transferring percentage. Remember not to disconnect your Apple device to your computer until the transferring is completed. For more details, check: How to Download Music from YouTube to iPod

http://www.rcaaudiovideo.com/docs/common/WHP141B/WHP141B_OM.pdf Page 6 gives instructions.

The main (rubber) belt is to be replaced

If can open it up and chek if the disc player and cassette have internal fuses or power connectors are not connected or power supply faulty.

The ringing is a power supply that has gone into protect mode due to a fault. It needs to be sent for repair.

Isn't it a standard figure-8 lead? Ebay.

You can get more information on this radio at URL below. Good luck! BTW, if it works well its good! https://www.google.com/search?q=RCA+victor+model+1f-1E&rlz=1C1SQJL_enUS778US778&tbm=isch&source=iu&ictx=1&fir=jg7XBueei-00eM%253A%252CeoUs3jqcmt73GM%252C_&usg=__Ywc2E0X8TkgujdyeXksSl_6j3To%3D&sa=X&ved=0ahUKEwiRrs7h7NbYAhWNUd8KHYBGCCgQ9QEINDAC#imgrc=jg7XBueei-00eM:

Yeah, just visit this web-page to know How to Track Cell Phone Without Them Knowing.

Actually most use the AC Ground as the other "phantom half" of your antenna... Of course YOU will not get access to that circuit because errors there could cost your life. You COULD try stripping back some of the insulation and extending that single wire to a longer wire? Wire placement will be a factor too so try moving that longer (and stock wire) around for BEST reception. Here is a link with some insight: How to Get Better Reception for My Single Wire FM Antenna Techwalla com I tried to find a "service manual" and schematic to help more, but I could find none... these items are mostly throwaway now because the cost of labor and STOCKING specific parts is too expensive! Anthony

Probably pretty easy. On back of TV see if there are RCA AUDIO OUT plugs. One likely is red, one white. Run a RCA cable from those to your AUDIO/AUX IN connectors on the receiver ( Be sure to turn off the internal speakers on the TV. More info here: https://www.lifewire.com/connect-tv-to-stereo-system-3135127 Good luck!

The phono-sockets, aka RCA sockets have a female pin in the center. Sometimes, these tube-shaped metal pins become stretched or oxidized, causing loss of contact. Option 1: The easiest quick-fix you can try is to briefly squirt the socket and cord-plug with Servisol or similar evaporating contact-cleaner, then repeatedly twist, push and pull the plug in and out to 'scrub' the potentially oxidized surface. If that doesn't work, option 2 is possible if your sockets are open at the back of each socket, ie: not sealed / molded types. Option 2: Unplug power, remove cover, locate phono sockets. If center pins can be seen from rear, try crimping slightly with needle-nosed pliers, or use a dart point or pen-knife to 'push' the pin-barrel slightly closed. Testing: Make a test-cord with plug removed, connect an AV audio source temporarily by hand to the suspect socket's connectors, observing polarity of center and screen. If molded plugs are suspect, try levering pin-barrel more closed from front end if possible, or if totally kaput, renew sockets.

Is it working ok? If so, forget the update. If not, just what is the issue?

If you are comfortable, unplug the unit, remove the top cover and you may be able to push with a small tool from the inside and remove whatever is stuck.