Lewmar V700 Vertical Windlass - 12V 1/4" W - Answered Questions & Fixed issues


I would check the wire leads off the windless to switch and from switch to battery (typically ground) During times of extreme load thoes thick wires heat up expand and contract and might loose a little contact or corrosion. Thoes windlesses are pretty bullet proof and very rarely have i seen one break. So I don't think its the winch itself. I would start there. Good luck Aloha

Lewmar V700... | Answered on May 21, 2018 | 94 views


Pins are splayed on the end to keep them from coming out. Remove entire hinge or drill out pin and replace, remembering to peen the end again.

Lewmar Boating | Answered on Sep 12, 2017 | 684 views


GOOGLE IT WITH THE MAKE STATED FIRST

Boating | Answered on Apr 21, 2020 | 35 views


This one?
https://www.walmart.com/ip/Electronics-Built-In-Bluetooth-Marine-Antenna-Cone-USB-DIN-Speakers-Stereo-LCD-Range-Two-Port-WCP365BT-Single-Long-inch-Dual-6-5/658806335

RT is normally reserved for transmitting, this is a receiver. Or is it linked to a two way transceiver and automatically cuts out music for telegraphy transmissions coming in?

I can't find the manual for it. The reviews at the lower part of the page suggest it is a bargain basement unit. I have a Jenson :>)

Boating | Answered on Apr 11, 2020 | 77 views


My E4RCCS 1988 outboard has a diagram at the fuel inlet that says 100:1 fuel mixture
2_29_2020_5_41_44_pm.jpg2_29_2020_5_41_47_pm.jpg

Boating | Answered on Feb 29, 2020 | 224 views


Hello. You have two springs in carburetor and one in Magneto roto. No spark I pick the Magneto. For complete brake down illustration I suggest Sears parts on the web. Good luck & happy fishing.

Boating | Answered on Jan 22, 2020 | 117 views


NONE OUTSIDE OF THE BOAT ONLY GAS FILLER THERE

Boating | Answered on Jan 09, 2020 | 77 views


This is probably the best route to take. Get the Service Manual if you intend to do your own servicing.

https://www.marineengine.com/manuals/seloc/online-manuals/johnson-evinrude-outboard-manual-online.html

This shows wiring thumbnails but don't lead the the wiring diagram

https://www.google.com/search?q=evinrude+e25telcnb+solenoid+wiring+diagram

Boating | Answered on Jan 08, 2020 | 77 views


Tightening clutch on capstan should fix the problrm

Boating | Answered on Jan 05, 2020 | 140 views


Brand new... thats why they have warranties

Boating | Answered on Dec 15, 2019 | 196 views


4600 lbs.

Boating | Answered on Dec 15, 2019 | 135 views


IF IT DROPPED PERHAPS 1/2 INCH THE SHIFT ROD NEEDS DISCONNECTED .

Boating | Answered on Nov 30, 2019 | 111 views


GO SEE YOUR LOCAL DEALER FOR ASSISTANCE

Boating | Answered on Nov 24, 2019 | 83 views


MEASURE IT AND GET SMARTER FOR YOURSELF

Boating | Answered on Nov 23, 2019 | 83 views


I think there is a nut holding the prop to the shaft and there might be a shear pin going through the prop and shaft. Remove those to get the prop off. It may have been on so long, there might be rust and other junk holding it on. Spray with penetrating oil and let sit to loosen the rust.

Boating | Answered on Oct 31, 2019 | 105 views


I suggest you post your question on this forum:

http://www.boatered.com/forum/topic.asp?TOPIC_ID=131726

Boating | Answered on Oct 30, 2019 | 105 views

Not finding what you are looking for?
Lewmar V700 Vertical Windlass - 12V 1/4" W Logo

3 questions posted

Ask a Question

Usually answered in minutes!

Top Lewmar Boating Experts

ray gallant

Level 3 Expert

67926 Answers

 vpsoccer
vpsoccer

Level 2 Expert

282 Answers

Andrew Taylor
Andrew Taylor

Level 3 Expert

32360 Answers

Are you a Lewmar Boating Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...