20 Most Recent
Questions & Answers
Siemens se 587 router
You can try manuall setup of da router.
The Default gateway for Siemens Gigaset SE587 is 192.168.1.1. Open Internet Explorer and put the def gateway in the browser.
The default username and password for siemns router is admin.
Click on Setup Tab than Basic Setup on left hand side. Update the details as folloing-
Use – Tiscali data PPPoA Interface
PVC Selection – Tiscali data PPPoA
Authentication – Auto
User Name - Tiscali u/n
Password - Tiscali password
PPPoA Connection Mode- Always On
NAT - ON
And click on save settings. To confirm if the customer is connected, check the status of Online light – which should be green. Alternatively click on status (On top) to check internet status to confirm connection.
Setting Up Wireless connection – Click on da wireless tab on the top.
Ensure that the Auto channel is disabled and the wireless channel is 11, wireless n/w is Enabled and mode is Mixed.
To secure the wireless connection – Click on Wireless Security option on left hand side
If you want the Security mode as WPA than select the wireless security mode, as WPA and enter WPA Shared key which would be on the base of the router. Again click on save settings.
Try connecting to the wireless network again and I m sure it should work..... lemme know if it does.
on Oct 31, 2010
Hi i'm trying to connect my i phone to my wireless
Use an Ethernet cable to connect a desktop/laptop computer to the router. Then, using the PC, you can "configure" the "wireless" capability of the router, and you can establish an SSID and a password. Then, configure your iPhone to _use_ that SSID & password to connect.
on Mar 07, 2010
My siemens speedstream 2623 router needs software disks that come
Are you trying to install the router.
You can do it manually without the CD.
Make sure that your computer is able to go online through the modem.
If your computer is able to go online through the modem
Then you need to connect the computer to the router and the modem to the router.
open the set up page of the router and change the settings of the router according to the ISP.Click Here
for step by step by instructions
on Feb 10, 2010
Hi I have a Siemens Gigaset SE587 WLAN dsl that
Yes you can adjust signal with channel type.
For that Connect your router to computer with ethernet cable then you can access it with following default link.
If you are not able to access it with above ip then check your computers ip address gateway ip is your router ip try with it.
Then it ask for user name and password.
Type user as "admin" and password as "admin" or "password" or blank.
Then you can see configuration page of router.
Then click on wireless settings and change channel type to 4 or 6 or 11 then save settings and restart router.
Try all 3 1 by 1 then check.
Let me know if you need further assistance.
Thanks for using FixYa.
on Jan 19, 2010
How can i find my network key for siemens router
You will need to check the wireless settings of the router .
Is there any computer connected to the router with the Ethernet cable?
If not then connect 1 computer to the router and open the router set up page. Once you open the router set up page, you will be able to find the wireless network key.
Use that password to connect to the wireless network
for step by step Instructions on how to find the network key
on Dec 23, 2009
Hello - anyone there?
1. Connect the wireless router to your computer with a LAN cable.
2. Start your browser and enter the router's configuration URL
3. Enter the router setup login and password
4. Change the admin password
5. Go to the wireless settings and change the default SSID and turn off SSID broadcast.
6. Setup encryption key the strongest is WAP2
7. For further secutity measures - turn on MAC address filtering and enter the MAC address of the wireless cards on the computer/s you want to connect to this wireless router.
8. Record the settings you have made and keep it in a safe place and Save the settings.
9. Configure the wireless cards on the computer/s with the SSID and encryption settings of the router.
10. Remove the LAN cable and the computers should be able to connect to the router.
on Sep 28, 2009
I have fogotten how to setup the Speedstream 2624
If you dont want this router to be a DHCP, all you need is disable the DHCP function in this router. So, this router will only act as a switch and will not provide IPs to the other devices.
To disable the DHCP,you need to log on to the web interface of this router . Hope this helps
on Aug 20, 2009
My speedstream 6520 will not let me log in using
Only way is to reset the Router to Factry settings.
Press the reset button on the bottom. But it has two modes one is just a reboot and the other is return to factory settings.a short press reboots it, if you hold it down for a few seconds until the power LED flashes between green and red, then release it, that will factory default it.Then you will be able to login.
on May 20, 2009
Not finding what you are looking for?