20 Most Recent Siemens optiPoint 300 basic (L28155H2100A102) IP Telephone - Page 9 Questions & Answers

hi,

Here is a link that will allow you to download "getting you started" pdf manual etc,

http://gigaset.com/shc/0,1935,hq_en_0_23012_rArNrNrNrN_prodId%3A138495,00.html

Regards
GeWiz.

Do you have laptop connected to Router with RJ45 cable??? if not plug it in and it should work. (This will prove all U/N and P/W are OK.)

If its all OK as above then to set it up wireless simply un plug and enable wireless faciltiy in the laptop "Control panel" and "Search for available networks" "Connect" to whatever your network name is. If it asks for a pssword (It should do) then you must type in the WEP key you originally put in to router. (Assuming you have a secured network before)

NO THERE IS NOT NO!

Hello there..

Well, as i understand you want to plug out the wired lan between computer an router and switch to wireless lan between computer and router?

If so, then you need to buy a wireless card or adapter in order to connect to router via computer without using ethernet cable. Wireless dongles in my opinion is the way to go, it is portable and very cheap and it works very good. Here is a link where you can compare prices and reviews.

http://www1.epinions.com/Wireless_Adapters--wep_64_bit

Really hope that this can help you.

Best regards
Andrea

Click Start>Run> type cmd Then type ipconfig
You can get a Siemens manual here. and this site will help.
Depending on your OS, you might also find help for your network setup here or here.
You may also be interested to see here and here.

I hope this information allows you to resolve this issue. If you need further assistance, please post back with a comment to this thread.
If I've managed to answer your question or solve a problem, please take just a moment to rate this post....thanks!

Hi,

For IP address, you need to contact Service Provider. Each customer has it's unique IP address that helps to track the person, if required.

Thanks.

Your non-specific question is hard to answer without all the facts... but generally, any O/S above Windows 2000 will have the necessary drivers.
Depending how new your router is, you may need a driver download from Siemen's website for whatever O/S you are using.
As a general rule, once installed (with a disc) you should go to the site for the latest drivers anyway.

Thanks for using FixYa - a FixYa rating is appreciated for answering your FREE question.

press the Fn button at the very bottom on the left hand side of the keyboard. (its next to the ctrl button) press the Fn button together with F1. this should then bring up a box that says wireless status option. click in the circle for the on button and click the green tick. the wireless should now be switched on. Hope this helps.

Typically, the grunting would indicate a bad drive. Replace it. They're fairly inexpensive nowadays ($20-$30).

there are no modem blutooth

it depends if you have the driver for the wifi properly installed.

Hello,

Unfortunately it sounds like the keyboard may need to be replaced. You will need to reply back with the specific model number and I can assist you in finding a replacement.

Thanks

hi Favox,

you should be able to download all the drivers you need here .

that said, if i may suggest you also buy a lil program called "my drivers". its really easy to use and it will backup all your drivers so that you never need to download them again.
Always before you format backup the dirvers so you can get up and running asap.


i hope this helped and if you need anything further just ask.

access your router with following link

http://192.168.0.1

then type user name:admin
password is:admin or blank

then enable DHCP.then u can get ip automatically.

ok
install free avast antivirus then update it with internet.
then u see boot time scanning option.
then if u found any virus delete it witjhpressing "1" key.

sir were having a conversation and our chat was cut?

Reboot or do a full shut down and try again. Otherwise run a system restore point to a registry time before you did the installation.

when you hit the button does it turn on if not then you might need a new power supply if it turns on but you get nothing might be the hard drive to to reboot the computer with the reboot disk

try pressing start, control panel, network and internet conections, network conections this should show your lan page then press on the lan you need to conect then it should be conect or bridge conections

You will find how to here:

http://www.microsoft.com/athome/moredone/wirelesssetup.mspx


Have a great day!
Pablo :-)