20 Most Recent Audiovox MVDVD4 Car Video Player Questions & Answers

Ebay should have them.

my sceen will not show pictures everything works but the pictures from the dvd

hi,

i have found a web site which i think would work with your VOH682

here is the link:

http://www.parkmyauto.co.uk/ck0-1080-in-car-3rd-gen-dvb-t-12v-twin-digital-freeview-hideaway-tv-tuner--glassmount-antennas-737-p.asp


a) your VOH682 have a video display system of NTSC which

means other color system might not possibly work.


b) it needs signals which have NTSC system to work. either on RF

(antenna) or in video input.


hope i have helped you, thanks for using Fixya!

Most FM modulators most commonly run on FM frequency 88.1 or 88.3 but usually have several options, so play arround with the stations in that range, and see if you get sound, also look under the dash for a toggle switch of sorts, sometimes the modulators have to be turned on..

This is where I found the manual...it was a challenge but I got it...and there are several versions it appears so you decide... Here is the primary link..then enter the code shown http://www.devicemanuals.com/guide/pdf manuals/Audiovox/Audiovox-MVP401V-MVDVD4-Owners-Manual-TkRVMk1EST.html After that this is the actual download site and link.....I hope this helps and good luck...also thanks for rating my effort...the Fang. this is the page... http://www.devicemanuals.com/downloadguide.php this is the actual download address... http://www.audiovox.com/manuals/owners/1286364A.pdf as i said there were several versions...but I'm certain you will find what you need here.Any other probs or ? shoot me a follow-up take care...the Fang.

Just stumbled upon this as I was searching for a new MVDVD4 and thought it might help you out!! :

When the van was a little over 3 years old, the DVD player suddenly quit working. I would put in a DVD, the player made some noises like it was trying to read the DVD, then the display would say "NO DISK".

As it was out of warranty and I have a background in electronics, I opened the player. After playing around for a little while, I was able to fix the player real easily. If you have the same problem (and the player is out of warranty), open up the DVD player by removing the screws and breaking the seal. I blew out the inside with compressed air, but I doubt this made a difference. The problem was that the DVD was not spinning. The spinning mechanism under the DVD tray was not starting like it should. I carefully sprayed a couple drops of WD-40 (well actually Remington's Rem Oil) where the metal rod the spinner sits on goes into the motor mechanism that spins it (it will make sense when you look inside. It is where the little metal rod goes into the plastic casing). After a couple of drops of oil, the player worked fine again.

The Audiovox AMP777 is a 4-channel power amplifier, and the input wires will depend on the audio source you are using. Typically, the amplifier will have RCA input jacks for left and right channels, and you would use RCA cables to connect the audio source to the amplifier. Some amplifiers also have a high-level input option, which would allow you to connect speaker wires directly to the amplifier's input terminals. However, it's always best to consult the user manual or contact Audiovox support for specific wiring instructions for your amplifier model.

Line out into the vehicle radio unit. https://www.voxxelectronics.com/docs/common/AVXMTG10UA/AVXMTG10UA_IM.pdf https://www.google.com/search?q=Audiovox+MTG+DVD+Video ..

Request the diagram from Audiovox.