20 Most Recent Audiovox AVP7000 VCR - Page 9 Questions & Answers

Hi and welcome to FixYa,

Initially, determine and postback the exact model number of the Audiovox combo TV/DVD unit.

Offhand, if it were a slot type DVD loading system, try fishing the inside of the slot in case a disc is stuck inside. This is best done with a credit card like something. The idea is to jar the erring disc while pressing on the EJECT button. In some instances, a can of compressed air maybe used.

Alternately, power off and unplug the unit. Press and hold on the EJECT button while plugging in and/or powering the unit. May have to be done a couple of times.

Should the above be not corrective, options then are:

• consider a DIY (do-it-yourself) repair if and only if very familiar with electronic components & circuitry, use of a DVM/VOM, a soldering iron/station and safe working practices with electrically powered devices. Access to a Service Manual or at the very least, a schematic diagram would be a necessity;
• should you be uncomfortable with a DIY, perhaps your best bet would then be to seek the services of an authorized Audiovox Service Center (specially if still under some form of extended warranty) or a qualified professional.

Good luck and thank you for asking FixYa.

Blue screen on most TVs indicates that it is not able to see a signal on the input that is chosen. Most TVs have multiple inputs now, and some of the connectors share the same colors as well. I am betting that your karaoke box uses a 3 wire cable that comes out, 1 red, 1 white, 1 yellow that should go to the composite input on the TV. Here is the problem with that kind of cable. Very easily damaged. If you are sure that the input is set correctly on the TV, try replacing the cable.

Hi,

I have the same problem!

I can not figure the position of the spring.

Did you find an answer?

Simple if you don't know where to ground the wire to, just ground it with the ground wire of the radio. Twist the pink and black wires together, then put them with the black ground comming from the car. Hope this helps.

power supply

Try put again the batteries.A very simply and efficiently mode to see the remote control is work or not to tested of pressed taste next on radio posted on FM or MW.

you need to search your universal remote code for a audiovox code try all of the audiovox codes then once you find the right one, how you will tell is when you turn the tv off and on click menu then unlock the tv

Hi, you can order a new power supply adapter from the following website link. http://www.lcdpayless.com/productpage.php?productId=5316

Let me know if you need anything else.



Benjamin

Open the casing, check the following and follow the instructions.
1. Clean the lens using cotton or cotton cloth.
2 Take extra care not to touch the lens with bare hands.
3. If the player displays "no disc" right after closing the tray then
check capstan motor if it spins smoothly.
4. Replace capstan motor if it cannot spin smoothly or if it seems it
cannot spin the disc.

The most likely the TV has a power supply related problem. The most common thing to go out is the circuit board that supply power to the screen. Commonly called a Backlight Inverter Board.
I can't say it's 100% the problem because I can't actually look at the tv over the internet.
If by chance the TV is still under warranty with some type of extended purchase plan, go that route.
If not under warranty and If you have some electronic experience, you can purchase a Service Manual over the internet and diagnose the source of the problem and fix it by soldering in the new part. The Service Manual will give you circuit diagrams, test points, and part# lists. Usually, cost under $20.

I hope I shed some light on the subject for you.

hi this is praky16 u didnt rate for my chat. pls do it

ATSC is the name given to the new digital signal. NTSC is the current analogue signal. This is the standard name given to the American system of broadcasting.