20 Most Recent Audiovox FPE1078 7.8 in. TV/DVD Combo Questions & Answers

I usually order from www.shopjimmy.com for tv parts myself. Darfon V0 88070 101 Backlight Inverter Here is another site with a used one if you need it right now and cannot wait. Audiovox Inverter Board 48v0708001 E2 For Model Fpe2705 24v Inverter... If you need further help, reach me via phone at https://www.6ya.com/expert/steven_a67ead41eb5fc62a

You could open the TV up and follow the cord until you can find some kind of fraying or break in the cord or leads they are connected to. If it's the cable itself, you can solder them back together and wrap it in electrical tape. You just have to be careful about making sure the right wires are connected and that none of them are touching each other. Use the electrical tape to separate the wires so they don't short out and start a fire. If it's not the wire itself, then it's possibly the power supply it's connected to.

probably main bulb broke

You play some music cd, then let the dvd cool down, you do it enough times the condensation will be gone and DVD can then be played. You use remote to keep it on standby, then condensation problem will be gone forever. I have the same model and fixed it this way.

See if any of these will work.
1313
0906
1503
0793

In the menu theres a channel set up mode. You want to switch from antenna to cable mode, then do an auto search. Then all your cable channels will come in. Your going to need the original remote to go into the correct menu. good Luck

Please refresh my memory; What was it that I had suggested originally?

Contact your authorized servicer as you have a more elaborate tech problem...accordianman

What source are you using? If cable, you should only be able to pickup channel 3 or 4 if you're using the box. If there is no antenna, that would be the only other answer if the set checks out...accordianman

It's possible that the issue with your Audiovox pursuit PRO9056c remote start system is related to the antenna or its connection. Here are a few things you can try to troubleshoot the issue:

1. Check the antenna connection: Make sure the antenna is properly connected to the control module of the remote start system. You may need to remove the panel where the antenna is mounted to access the wiring and connections. Check the wiring for any signs of damage or corrosion, and make sure the connections are tight.
2. Check the fuse: The remote start system may have a fuse that is responsible for powering the antenna. Check the fuse to make sure it is not blown or damaged.
3. Reset the system: Try resetting the remote start system by disconnecting the battery for a few minutes, then reconnecting it. This may help reset the system and resolve any issues that were causing it to malfunction.
4. Consult a professional: If you are not familiar with automotive electronics or are unable to resolve the issue with the above steps, it may be best to consult with a professional technician who can diagnose and repair the system for you.

It's also possible that there is a problem with the remote start system itself, such as a malfunctioning control module

See if the videos and articles help. https://www.google.com/search?q=connect+a+Roku+2+to+an+Audiovox+ADV12 ..

Unfortunately, you are probably dealing with a copy protection issue. The digital handshake can't be returned by your KLV3913. You get the same issue if you connect a HDMI source (Blu-ray player) to a VGA monitor. I wish that I had better news for you. Cindy Wells

It's all one board, chances are your audio output IC has failed and needs replacing

Jim, First thing I would do is try a different DVD to see if the problem persists. Otherwise, this device is equipped with integrated speakers, meaning it is unlikely that you will be able to replace them. You may be in the market for a new Audiovox, unfortunately; but before you scrap it I suggest taking it to a local electronic repair store near you. Hope this helps, Best regards