Dual Avalon AD2022 Mono Microphone Preamp Microphone - Answered Questions & Fixed issues


Record players have a phono output that is much lower level than other audio equipment. If your receiver has a phono input that will have a preamp to adjust the level. Or your turntable may have a switch between phone o or line level and that would increase the volume as well. Most audio signals are line level but phonos are a magnetic signal that is much weaker and needs to be Amplified by a preamp in your receiver or in the unit itself.

Dual Audio... | Answered on Dec 18, 2018 | 55 views


you don't every thing is not pairable with every thing else

Dual Audio... | Answered on Nov 12, 2018 | 34 views


What about it .NO question , no answers

Dual Audio... | Answered on Oct 12, 2018 | 28 views


Hello, Edward -

I have only been able to find Service Manuals for the Marantz SD-160 dual deck cassette player for sale.

I was unable to find the operating manual for the vintage cassette player / recorder on the Marantz website.

However, if you have not yet already done so, I suggest you contact Marantz Support, either via phone or email, and ask if there is a copy of the operating manual for the SD-160 in the company archives and if they could provide you (sell you) a photocopy or scanned PDF version of the manual. This is the link to the Marantz Support page:
https://marantz.custhelp.com/app/answers/detail/a_id/104/kw/manual/related/1

If that option doesn't work out, Option 2 is to find one or more online sellers (eBay, Craigslist, Amazon, etc.) of the model of cassette player / recorder and see if they mention the operating / owner's manual in the product sales information. If they don't mention a manual, I suggest contacting the seller/s and asking if they have the manual.

If you find an online seller with the manual, ask if he / she would either photocopy the manual for scan it as a PDF document and sell it to you.

Best wishes.

Dual Audio... | Answered on Jan 26, 2018 | 101 views


Try Googling (elgin)(3468E)(manual) without parens.

Dual Audio... | Answered on Oct 16, 2017 | 64 views


All you should need to do is tune the clippers with the large tuning screw on the side of the case until the loud noise stops and they just hum as they should. They might need some other adjustments to blade alignment after this. A barber should help you with this if your not sure. I pays to have blades correctly aligned for clippers to function correctly and safely so they dont pull hair or cut your skin. Oil blades every time you use clipper and they will last a lifetime.

Dual Audio... | Answered on Aug 17, 2017 | 24 views


Just google it.

Dual Audio... | Answered on Jun 26, 2017 | 155 views


Look on the data plate to see if there is a voltage and current draw value on it. The switch should be rated at 120 Vac @ 10 A.

Dual Audio... | Answered on Feb 02, 2017 | 86 views


It sounds as if the UP VOLUME button/switch is broken and ON all the time. See if it is stuck down
[email protected] or you can contact us at that address as we repair/renovate all items electronic and electrical old and new.

Dual Audio... | Answered on Jan 07, 2017 | 331 views


Use the pre in out connections or any in/out connectors that you have. Can you send a picture?
[email protected] or you can contact us at that address as we repair/renovate all items electronic and electrical old and new.

Dual Audio... | Answered on Jan 07, 2017 | 139 views


It seems that the special grease is old. There is a wheel moving the toneam. Remove any old grease from it and try again. If you need further instructions or a way to get new grease please refer to www. dual-board.de This is the worlds largest knowledge base for vintage Dual turntables. It is in german, but feel free to post in english, most people here in germany speak english, too.

Dual Audio... | Answered on Dec 03, 2015 | 201 views


  1. so who knows what kinda malware this site is spewing.
  2. But if ya still looking for a xdm6820 faceplate I recently aquired one in auction
  3. You still got the deck?
  4. july 06 2014 today is 3 18 2015
  5. Dallas Tx area

Dual Audio... | Answered on Mar 19, 2015 | 67 views


Try

www.usspeaker.com

Dual Audio... | Answered on Feb 07, 2013 | 121 views


Check your wiring connections. A similar thing started happening to me out of the blue. The unit would work fine for a period of time, and then just shut off for no reason, and I couldn't get it to come back on. The next day, it would come on again when I started the car and stay on for a while, only to shut down again. The red light behind the face plate continually flashed, regardless of whether the receiver was working. In my case, there was something off in my red wire connection. The unit would turn on / shut off when I moving the wires on either side of the connection. I redid the connection, secured it with electrical tape, and the problem has not reoccurred. If the red wire is not the problem in your case, try the black and yellow connections. These appear to be the wires that could cause this to happen. I can't explain why the power kept repeating the power on / off cycle, unless the wires were in just the right position to be moved / jostled slightly while driving. Hope this helps.

Dual Audio... | Answered on Feb 06, 2013 | 751 views

Not finding what you are looking for?
Dual Avalon AD2022 Mono Microphone Preamp Microphone Logo

1 questions posted

Ask a Question

Usually answered in minutes!

Top Dual Audio Players & Recorders Experts

Michial Gueffroy

Level 3 Expert

1140 Answers

Lawrence Oravetz

Level 3 Expert

10543 Answers

Andrew Taylor
Andrew Taylor

Level 3 Expert

31012 Answers

Are you a Dual Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...