Furuno 1833C/NT GPS Receiver - Answered Questions & Fixed issues

Try adjusting the GPS position offset in the GPS Sensor Settings Menu.

Furuno 1833C/NT... | Answered on Nov 18, 2013 | 111 views

I know this is an old question but just ran across it. The 1833C/NT is a radar and chart plotter. It requires the external and optional black box sounder to have depth recorder functionality.

Furuno 1833C/NT... | Answered on Nov 18, 2013 | 133 views

You have to be in the "Installation Mode" to adjust the heading. Hold menu key down while pressing the "pwr" key. Then select menu/installation and you'll be able to find the heading adjustment section.

Furuno 1833C/NT... | Answered on Jul 15, 2010 | 74 views

the GP31 has an NMEA in/out in the power cord - out is yellow green in blue(or black) and white on the 1833 you will use data 4 typically which has an in and out also, same colors hook out to in and in to out, program and done

Furuno 1833C/NT... | Answered on Jan 16, 2010 | 125 views

The display uses a serial interface, otherwise known as a comm port. You can get a USB to DB9 adaptor practically anywhere. Once you have a serial connection, you will need software such as MaxSea to send the waypoint with.

Furuno 1833C/NT... | Answered on Jan 13, 2010 | 226 views

hope this helps if so leave some feedback 8]

Furuno GPS | Answered on May 21, 2020 | 45 views


Furuno GPS | Answered on May 01, 2019 | 133 views

Possibly voltage too low, faulty unit, no power coming to the unit.

Furuno GPS | Answered on Oct 09, 2018 | 184 views

The GP31 manual doesn't mention language change

Furuno GP 31 Operator Manual

whereas the GP33 does

Furuno GP 33 User Manual Language Setting Input output Data

Try doing a Factory Reset and see if you are offered language at first Start Up?


There is a Foruno Forum

Furuno USA Community View topic Wiring Help GP 31 FCV 620

Furuno GPS | Answered on Feb 11, 2018 | 140 views

try going to the ships register and applying for the changes
there will be a marine department that will point you in the right direction

Furuno GPS | Answered on Apr 03, 2017 | 240 views

Radar type????

Furuno GPS | Answered on Oct 19, 2016 | 62 views

Try this 303030

Furuno GPS | Answered on Oct 18, 2016 | 933 views

A trick that I have found with the marine Furuno products is that they remember the state that they were in the last time power was removed from them.
In the unit is off when you remove the AUX power than when the AUX power is turned back on the unit will remain off.

If the unit was on when the AUX power was turned off then the unit will be automatically turn on when power AUX is turned back on

This feature keeps the unit alive if power is disrupted under way so that the helmsmen doesn't have to keep turning it back on during busy times.

Furuno GPS | Answered on Dec 09, 2015 | 94 views

You can interface the GP30 to the 1715 and get Lat/Lon readings where the cursor is. The GPS has extra wires in the power cable. The 1715 will require a NMEA cable pn 000-154-028. Connect the white GPS wire to the yellow radar wire and the blue GPS wire to the green radar wire.

Furuno GPS | Answered on Apr 25, 2014 | 127 views

will not enter navigation.

Furuno GPS | Answered on Jul 16, 2013 | 129 views

Hi. Check here my friend http://www.mods.dk/manual.php?brand=furuno Good luck.

Furuno GPS | Answered on Aug 31, 2011 | 498 views


If you are still looking for a Navman 900 manual, It is available from Plastimo.go to www.plastimo.com/uk/services/manuals.php


Furuno GPS | Answered on Jan 01, 2010 | 1,063 views

Not finding what you are looking for?
GPS Logo

5 questions posted

Ask a Question

Usually answered in minutes!

Top Furuno GPS Experts

Cindy Wells

Level 3 Expert

6136 Answers

The Knight
The Knight

Level 3 Expert

76407 Answers

Andrew Taylor
Andrew Taylor

Level 3 Expert

33384 Answers

Are you a Furuno GPS Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides