20 Most Recent GE 19GT243 19" TV Questions & Answers


Reset the password to '0000' by holding the VolumeDown and ChannelUp buttons on the TV (not remote) for about 5 seconds. Do this while viewing blocked content- you'll see the screen blink when it gets reset. Then go into the menu and disable/change the v-chip settings as desired using password '0000'. Hope this helps- -sv-

GE 19GT243 19"... • Answered on May 29, 2014


you can use the remote or by using the menu button in your tv. go to timer settings then just turn set to off.

GE 19GT243 19"... • Answered on May 26, 2014


Sounds like a tuner fault. Contact any service technician to make it confirm, and to replace. If you wish to get some details; check the site linked here. Viewing it in "Mosaic" will make surf easy. http://electronicshelponline.blogspot.com/

GE 19GT243 19"... • Answered on Mar 14, 2014


Input menu. An input button on the TV and remote.

GE 19GT243 19"... • Answered on Feb 03, 2013


This TV is not digital compactable. A digital converter box is necessary to view digital channels.

GE 19GT243 19"... • Answered on Aug 22, 2012


You may have a bad ground in your tuner board! Or it may be a bad cable connection [the coaxial cable itself] Be sure you checkout your connections, cables, vcr,dvd etc. before you take the cover off the back of your TV. Thanks for asking!

GE 19GT243 19"... • Answered on Jun 09, 2010


press the av or au bullon on remote until you get to the dvd "channel"

GE 19GT243 19"... • Answered on May 03, 2010


you'll need to acquire an rf modulator if the vcr does not have an rf out to tv connector, the electronics department of any discount store has these in stock, it comes with installation instructions and the necessary accessories for you to make the install.

GE 19GT243 19"... • Answered on Sep 14, 2009


Without line out connections on the DVD/VCR unit and line in or RF modulator for the back of the TV in question, that cannot be done...accordianman

GE 19GT243 19"... • Answered on Mar 31, 2009


Not if you cable TV, DirecTV, Dish network, or FIOS. The converters are not usable with those services.

If you use a regular TV antenna or rabbit ears, then, yes, you will need a DTV converter box. If so, I'd suggest getting one well before next February. Why? 'Cause the pictures are better, and you'll have access to "virtual channels", where broadcasters send more than one program on channels like 4.1, 4.2, etc. Also, if you have poor reception, you may need a better antenna to see the DTV signals. Better to know that before DTV is all that is being broadcast over the airwaves.

GE 19GT243 19"... • Answered on May 23, 2008


If there is nothing, it is probably the power supply. Read this though https://www.fixya.com/support/r29790007-repairing_own_television ..

GE Televison &... • Answered on Apr 24, 2021


GE Universal Remote Codes with Program Instructions.

www.directutor.com > content > ge-universal-remote-in...
How to Program a GE Universal Remote Control. Enter Setup Mode. Press and hold down the SETUP button on the remote until the red light on the remote turns on. Press the device type button. Enter the device code. Tests the results. Repeat this process for your other devices.

GE Televison &... • Answered on Jan 29, 2021

Not finding what you are looking for?
GE 19GT243 19" TV Logo

23 questions posted

Ask a Question

Usually answered in minutes!

Top GE Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76584 Answers

Cindy Wells

Level 3 Expert

6259 Answers

Tom Chichester

Level 3 Expert

61759 Answers

Are you a GE Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

GE Televison & Video

  • GE Televison & Video

Most Popular Question

need reset v chip ge tv 19gt243

  • Televison & Video
Loading...