20 Most Recent
GE 13TVR72 13 in. Combo Questions & Answers
Is there a way to
put a tape in and remove it.
channels should change then. if not buy a universal remote with a menu button on it. one for all Brand.
What is the channel to play back a recorded
Depending on how its hooked up. If you are using just coax cable, channel 3 or 4. If you are using Video cables, "Video" would be the input. If you still have an issue, post a reply and I will help you further.
Digilogic tv-dvd wont work
The blue screen in most sets mean tuner problems or it could be stuck in video and the DVD needs cleaning. If you try a bought dvd cleaner and it doesn't work, you could try cleaning by hand, but this will cause you to have to open set and unscrew somethings. Just be careful.
After trying to eject stuck tape now when tv is
This unit has a problem in the vcr. When the vcr section is not happy nothing is happy. All combos were like this. They are full of safety mechanisms. This will involve pulling the vcr section out and repairing what is wrong down there. Have a qualified shop check it out for you. Thanks
Static after moving 13GP300 from one cable connection to another
try checking that the coaxial cable is inserted all the way. or it could be the wiring behind the walls on that side of the house is interfereing with the reception. or is there something else plugged in the same out let that wasn't plugged in in the opposing location? that could be causing issues as well. but first check the coaxial cable going into the back of your tv or cable box.
MAGNAVOX TV /DVD,VCR CUTS OFF
Hi. these combo units have a very short life span and it is due to the integrated design of the circuit board layout. the power supply and main main board are all combined. This click that you stated, was a mechanism failure that runs the VHS assembly. this may be a spring that has come off the link or, it could be a solenoid that has burned out. there are many linkages and electric motors that make up the VHS assembly and, all this is combined within the main circuitry.
The second issue is the power supply section Of the board layout. this unit has an integrated power circuit board that has experienced a malfunction within the main capacitors. this is causing the Tv combo unit to power off. it is heat related and, this has damaged this section of the board. Due to the fact that this entire assembly is integrated, you will have to replace the entire main board and VHS assembly. this will be costly and , it may be more cost affective to just cut your loss and purchase a new set at this time.
The actual repair cost will be 298.00 plus labor.
MAGNAVOX TV /DVD,VCR CUTS OFF
is the VCR trying to eject a tape even if there is no tape in machine. then shutting down ? if so the vcr sensors need to
be replaced
sensors avalible from funai
Trying to find model number on my GE universal remote so that I can get codes for my converter box
Locating the model number on a GE universal remote can vary depending on the specific model. Here are some general tips to help you find the model number:
- Check the Battery Compartment:
- Open the battery compartment on the back of the remote.
- Look for a sticker or label inside the compartment that may contain the model number.
- On the Remote's Front or Back:
- Check the front and back of the remote for any labels or markings that might indicate the model number.
- User Manual or Packaging:
- If you have the user manual or the original packaging, check there. The model number is often mentioned on these documents.
- Behind the Battery Cover:
- Remove the battery cover and inspect the area behind it for any labels or markings that include the model number.
- On the Remote's Body:
- Inspect the body of the remote itself. Some models may have the model number printed on the front or sides.
Once you locate the model number, you can then proceed to find the correct codes for your converter box. The codes are usually included in the remote's manual or can be found on the manufacturer's website. If you are unable to find the model number or the manual, you may need to contact GE customer support for assistance.
If you provide more details about your GE universal remote, I might be able to offer more specific guidance.
Need universal remote codes for sansui hdlcdvd265b
https://www.fixya.com/support/r29872378-universal_remotes_no_facsimile_remote
4 Digit Universal Remote Codes for Sansui TV ; 0394, 5871, 1052 1556, 1208, 0135 ; 0888, 0310, 6071 ; 6061, 0806, 5441 ; 2832, 0264, 1230.
Replacement Remote Control for SANSUI HDLCDVD265 ...
Amazon.com
https://www.amazon.com > Replacement-HDLCDVD2...
This is a custom built replacement remote made by Redi Remote for the SANSUI remote control number 076R0LJ020. *This is NOT an original remote control.
Rating: 4.4 · 12 reviews ·
US$34.95
Replacement Remote for SANSUI HDLCDVD265, ...
Amazon.com
https://www.amazon.com > Replacement-HDLCDVD2...
Replacement remote control for Sansui HDLCDVD265, HDLCDVD325B, 076R0LJ020 with
all functions of original one. It replace each button of original remote ...
US$16.00
Need codes FOR GE UNIVERSAL RC 24914-D TO CONNECT MY roku express
Yes, you can use a GE Universal Remote RC24914-D to set up your Roku Express box. To do this, you'll need to find the correct code for your Roku Express device and program it into the remote. Here's how:
- Turn on your Roku Express device.
- Locate the "Code Search" button on your GE Universal Remote. This button is usually labeled "Code Search" or "Setup."
- Press and hold the "Code Search" button until the indicator light turns on.
- Enter the code 9-9-1. The indicator light will blink twice.
- Point the remote at your Roku Express device and press the "Power" button. If the device turns off, you have found the correct code. If it does not turn off, repeat steps 3 to 5 with a different code until you find the correct one.
- Once you have found the correct code, press the "Code Search" button again to save the code.
The codes for the GE Universal Remote RC24914-D can vary depending on the version, so it's possible that the code 9-9-1 may not work for your device. If that's the case, you can try other codes listed in the remote manual or on the GE website.
I hope this helps you set up your Roku Express device using your GE Universal Remote.
Not finding what you are looking for?