20 Most Recent
Jensen CD-2010X CD Player - Page 9 Questions & Answers
PINs for high level input
Hello gmb_66,
You did not specify exactly which Jensen amp you have. None of the Jensen PowerPlus series I found had high-level inputs. You can go
here and select your amp to download the manual. They should also have the connector for speaker inputs.
Most amps that have both high-level and RCA inputs allow you to use one or the other, but not both at the same time. If your head unit has RCA ourputs, those would be the ones to use, because they generally provide a cleaner signal to the amp with less noise.
Hope this helps.
My jensen uv8 sub remote wire only puts out 9 volts y
It is probably going bad or there is a short.Just simply use a keyed on wire ( radio power is fine) for your sub amp turn on . In otherwords use a power sourde that only comes on when vehicle ignition is turned on. If you use one hot all the time your going to kill your battery, Good Luck !
Had extra wires not hooked up on my mp5720 jensen pink and brown any ideaes
the Brown wire controls the mute function on the aftermarket hands-free kit,
Pink Parking Brake wire coming off the back of the unit. This is a safety feature that only allows you to view video while the car is parked. If you wish to bypass this the wire, then it does not need to be connected.
can tape them off
can tape them off
can tape them off
How to bypass jensen
There is a wire which grounds to your parking barke mechanism from your system. You must move this to another (fill time) ground.
Not finding what you are looking for?