Top 20 Jensen TS2750J TV Questions & Answers

Fault to the main power supply regulator section. Either it will be a separate board, or the part of main board. Check and replace damaged component/s at its main power regulator [SMPS] section circuit. Contact any service technician. If you wish to get some details; check the site linked here. Pull up older posts. http://electronicshelponline.blogspot.com/ It will be best to replace the power supply regulator board as card basis rather than making "Surgery" to it; which usually will make loss for both money and time. Even though you can make it right, it will cost around an amount equal to the cost of a new board; including the cost of (spare parts + service charge) More to say, most of the spare parts to it will be difficult to get from open electronic spare part market. This is true to most of the flat panel TV power supply boards; irrespective of its brand and screen size.

0028,0022. Try these codes. If you wish to get more details; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. Common set-up codes to check with TVs and other devices are given, in the order of the "device's brand name list" in alphabetical order. Pull up older posts. Surf the site with patience. Surf the sites by type in the brand name to your set, in its search box. http://electro-medical.blogspot.com/ http://remotesearch.blogspot.com/ http://electrohelponline.blogspot.com/

260,266,268. Try these codes. If you wish to get more, try the following links. Both the sites linked have set-up code list & set-up procedure to many popular brand remote controls. Surf the sites with patience. http://electrohelponline.blogspot.com/ http://electro-medical.blogspot.com/

0516 0658 0502 0513 0684 0753 0541 0673 0195 0456 0601 0514 0193 0214 0054 0720 0533 0699 0361 0616 0338 0209. Try these codes. If you wish to get more; check the site linked here. It has set-up code list & set-up procedure to many popular brand remote controls. See it in "Mosaic" view. It will make surf easier. http://electrohelponline.blogspot.com/ http://electro-medical.blogspot.com/

Check and replace damaged components; or, check for any loose solder terminal/s at its vertical scan output section circuit. Gopakumar Gopalan Google

Codes to check with Lexsor are 0045,0028,0046,0082,0018. If you wish to get more setup codes, three digits, four digits or five digit ones, check this link. Pull up older posts. Setup code list and proceedings to some popular model remote controls are given.

Check its speaker. If it is found OK, check and replace damaged component/s in the audio output circuit inside.

Many Jensen TVs have a parental lock that can be set to stop children from watching certain television shows or channels. In order to activate or deactivate the controls, you have to know the four-digit code or parental lock passcode. If you forget the passcode or if the lock gets set accidentally, you can still unlock the TV.Turn on the TV using the remote control. In most cases, you will need the original Jensen remote to unlock the TV if you aren't sure of the unlock code. You can purchase an original replacement online if necessary.

• Look at the screen. If you see a red key on the bottom of the screen, press "Function" and "Mute" on the remote at the same time. This will unlock the channel. Do this if you want to bypass the lock to watch a certain show or channel while leaving the TV locked. All other channels will remain locked and the TV will lock again when it is turned off.

• Unlock all of the channels on the TV by entering 0711 or 3308. These are the Jensen factory reset codes that will reset the TV to the original factory settings. By doing this, you will loose any information that you have stored in the TV, such as channel labels and schedules. You will have to program the TV again by going through the entire initial set up.

•Call the technical support service number in your owner's manual if neither of those codes work. A technician can help you troubleshoot the television as the problem may not be the parental lock feature. Have the model number and serial number of the TV available when you call. • Take your television to a TV repair shop if neither of the codes work and the TV locked by itself while it was turned on. In this case, the TV may need to be rewired

Check and replace damaged component/s in its main power supply regulator section circuit. Contact any experienced service technician.

This can be the MAIN power supply in the protect MODE as it is possible that there is a short within in the driver sections. You need to be equipped to check as it involves isolating the circuit, check the + B to the related circuits . Check the SMPS, remove the connections to the main board and see if the voltage build up . If so you cane proceed to isolate the circuit which seems to short the power supply. check for heating components which can indicate a fault.

Hello Gabriel!

You could try to inquire here:
http://www.exchangeic.com/OnLineInquiry.html?part=5Q12656RT


you can purchase this part from

1. Shop 5 Van Rijn Building
DF Malan Street
Vanderbijlpark
South Africa rassie@ ' ); document.write( addy_text85391 ); document.write( '' ); //--> swiftelectronics.co.za ' ); //--> This e-mail address is being protected from spambots. You need JavaScript enabled to view it ' ); //-->
' ); document.write( addy87591 ); document.write( '' ); //--> [email protected] ' ); //--> This e-mail address is being protected from spambots. You need JavaScript enabled to view it ' ); //-->
Tel: +27 16 981 5853
Fax: +27 16 931 1197
Cell: +27 82 304 7008



or visit this link for the price cost
http://www.swiftelectronics.co.za/index.php?option=com_content&view=article&id=47&Itemid=56

2. David Rivera, Uruguay
Tel 099940049
Email [email protected]
Skype dabrum

or visit this link for the price cost
http://translate.google.com.ph/translate?hl=tl&sl=es&tl=en&u=http%3A%2F%2Fmaterialdeelectronica.blogspot.com%2F

Hello
To unloxk your Jensen TV do the following.

1. Turn on the TV using the remote control. In most cases, you will need the original Jensen remote to unlock the TV if you aren't sure of the unlock code. You can purchase an original replacement online if necessary.

2. Look at the screen. If you see a red key on the bottom of the screen, press "Function" and "Mute" on the remote at the same time. This will unlock the channel. Do this if you want to bypass the lock to watch a certain show or channel while leaving the TV locked. All other channels will remain locked and the TV will lock again when it is turned off.

3. Unlock all of the channels on the TV by entering 0711 or 3308. These are the Jensen factory reset codes that will reset the TV to the original factory settings. By doing this, you will loose any information that you have stored in the TV, such as channel labels and schedules. You will have to program the TV again by going through the entire initial set up.

4. Call the technical support service number in your owner's manual if neither of those codes work. A technician can help you troubleshoot the television as the problem may not be the parental lock feature. Have the model number and serial number of the TV available when you call. 5. Take your television to a TV repair shop if neither of the codes work and the TV locked by itself while it was turned on. In this case, the TV may need to be rewired OK.

Hello,
Yes you can. If you have a satellite receiver or a cable box, that remote will probably control your tv. If your source components don't have a remote either, than you will have to buy a universal but be sure to check that it is compatible with your Jensen TV.
Good Luck

Hello
You just buy one Philips Universal Remote control Model No: [CL 034]. Your Jensen TV is lited in its codes. Codes and proceedings are given.

0002 0502 0914

Direct Code Entry

1. Press and hold the CODE SEARCH

button until the red indicator stays

on, then release the CODE SEARCH

button.

2. Press and release the desired Mode

button (TV, VCR, etc.). The red

indicator blinks, then stays lit.

3. Enter the 4 digit code from the code

tables. Note: after a valid code entry,

the red indicator turns off. For an

invalid code, the red indicator

flashes.

4. With your device on, press

CHANNEL UP. If the device

responds, no further programming is

required. Note: If some buttons do

not operate your device, try one of
the other codes for your brand.
OK.

To check whether there is a suitable universal remote code, it's vital to know the make and model of your universal remote controller. The codes are different for each model of remote control.

Please provide the necessary details and I will do my best to provide an answer for you.

if it works everything else then it could just be the the button is broken, I would go get a cheap univrsal remote and it will do the trick. The factory replacment remote will cost way to much

The controls are locked. Try holding the Display button on the remote for a few seconds.

I hope this helps.

Cindy Wells

hold the display button for 3 seconds and it should unlock the parental control.

Maybe this will help you overcome those pesky child locks

Philips and Magnavox:
Philips sets use a four digit code to control the v-chip. The override code for Philip sets is 0711, although it may say "Incorrect code" the first time to trick you. If "Incorrect code" is displayed, simply enter 0711 again. To use it hit the MENU key to get to the menus. Go up or down until you reach AUTOLOCK or SMARTLOCK, depending on the model, and push the "right arrow" key on the remote. Enter the override code, and enter it a second time if it says it is incorrect.
Good luck and let us know how this turns out for you.

Please rate my help++++Thanks for using FIXYA