20 Most Recent
Jensen TS2050J 20" TV Questions & Answers
Codes for remote
Get a UNIVERSAL Remote for $10 and start over. It comes with the codes and is easy to set up.
Locked Devant Tv
wow that... sucks... if youve lost the remote and owners manual you could try leaving it unplugged a really long time. there are capacitors storing energy in the tv so that it remembers all the info even when you unplug it. if you leave it unplugged long enough you might be able to make it go to factory default. i hear using a screw driver to "short" the leads on the power cord can make it drain quicker. I have no idea if this will work. just don't stick the screw driver into the power outlet or try getting inside the TV... I like trying to answer your questions!
I'm fairly certain after a few days of being unplugged it will forget.
good luck, hope you don't need a new TV
Rca tru flat is password lock i never set a
Most RCA and GE TV
sets use a four digit code to control the v-chip. The code reset procedure is
different depending on the model. Try each method until you find one that
works:
1.
Hold down MENU
on the remote and VOLUME DOWN on the TV it's self at the same time for at least
4 seconds. The set won't say so, but the lock will be unlocked
2.
Hold down the 0
on the remote and the VOLUME DOWN buttons on the TV its self at the same time
for at least 4 seconds. The set won't say so, but the lock will be unlocked
3.
Hold down the
MENU button on the front of the TV and the TV button on the remote at the same
time for at least 4 seconds.
4.
Hold down GO
BACK on the remote and MENU on the front of the TV at the same time for at
least 4 seconds.
5.
Hold down EJECT
on the front of the TV and the MENU button on the remote at the same time for
at least 4 seconds.
Depending on the model,
one of the methods should unlock the V-chip. Now, if desired, you can change
the settings on the V-chip by going to the MENU and going to PARENTAL CONTROLS,
or on some sets, going to MENU and then going to TV SETUP, then to V-CHIP SET.
If you wish to get more details, check this link.
http://electronicshelponline.blogspot.com/
Pull up previous posts by its left sidebar, or
type in the
brand name and model number to of your set, to its
search box, and press '
Enter' or view it in
Mosaic /
Timeslide option.
I have a panasonic CT-3263W
hola tu el de la panasonic como estan espero ke bien solo keria saver si me puedes aser un favor por que yo tambien tengo una tv panasonic como la ke tu tienes y quisiera saver si me puedes pasar la configuracion de los colores de brillo nitides contraste y eso por que ala mi a le movierron los colores y se mira mui fea la calidad asi que si me puedes desir como van acomodados muchisimas gracias de ante mano saludosss a todos
Our Jensen TV has a locked picture in Pink on the
To remove the lock on the Jensen simpy press and hold the Display Button on the remote for at least 3 seconds whilst pointing it at the TV.
The lock will be removed and the TV will resume normal operation.
Please do leave a vote for the solution. Thanks for using FixYa.
Can't find code for ts2750j
Visit this site for more details. Type in the site name "Electro-help" either Google or Yahoo search box [not
in the address bar of your browser], and click search. It is an electronic equipments service help
site. All details you want are
there. Note the position of
hyphen in between words in site name, when you type it in. The site will appear as it is in
web; subtitled as service help to electronic home entertainement equipments.
Pull up older posts.
You can gather all details.
Sometimes, click open the adverts' by the side and bottom of each post
might give you more details.
My tv turns on to
This TV/LCD monitor has lost part or all of its controler board, you will need to open the back side of the LCD and remove the controler board, for further repair. remove and replace the controler board, to correct this problem. Also take note to check all ribon cables as well this tend to crack and also create problems with fuctionality as well.
Tank you for using Fixya.com
All of the sudden my Jenson has a red lock icon in
Unlock all of the channels on the TV by entering 0711 or 3308. These are
the Jensen factory reset codes that will reset the TV to the original
factory settings. By doing this, you will lose any information that you
have stored in the TV, such as channel labels and schedules. You will
have to program the TV again by going through the entire initial set up.
Good Luck,
--Matt
I have a Jensen TV, Model Number TS2050J. I need
Hi.
No, your tv is an older model sdtv with an analog only NTSC tuner.
Newer model have an ATSC/Qam digital tuner, but not your model.
This means that if you want to watch tv, you'll have to get a converter box. It will have the ATSC/QAM tuner i it, and it converts the signal into lower definition NTSC, and then sends it to the tv through either coax cable, or rca cables.
Once in a great while you might even find one that has s-video output, but those usually are expensive.
I hope this helps you out.
TS2050J TV (Jensen) locked. How is it unlocked?
Thank you following up. None of the solutions or codes you recommended worked.
So I drove to mother's old house and went through things until I found the manual (bedroom bookcase, bottom shelf, under bridge books and old papers).
The manual said to hold the display button down 3 seconds. I then drove to mother's new place (assisted living) and tried that. It worked.
Need remote control code
You always need to include the model of remote and also the device you want to control.
You might find it here with the complete information:
Remotes
The TV is making a very high pitched noise. The
Easy repair with some Super glue.Must take the tv back cover out.The FBT-the big block of plastic with a red wire with a cap hook to a CRT(tv tube).It have a high voltage gap going through a "3 inches paper clip steel bar on a FBT the big black plastic block.Put some super glue on that "3 inches paper clip steel bar on that big black plastic block.Should stop the high voltages gaps through that "3 inches paper clip steel bar causing a high pitched noises.
Not finding what you are looking for?