Kenwood KDC-415S CD Player - Answered Questions & Fixed issues

0helpful
1answer

What wire is the one to hook to live power to

the yellow wire coming from the deck is constant power.
10/19/2010 12:42:53 AM • Kenwood KDC-415S... • Answered on Oct 19, 2010 • 40 views
0helpful
1answer

Kenwood kdc-415s

if there is no amplifier separate from the radio - the blue /white wire from the back of the radio goes to the solid blue wire on the harness attached to the car's plug. the orange wire is not supported by the kenwood radio, so make sure you tape it well- if your not using a separate amp also tape up the blue/white wire coming off the harness you have coming out of the harness to the car. if this helps you please give me a good rating- if not please e-mail me at [email protected] respectfully M. Merle
10/13/2008 5:12:04 PM • Kenwood KDC-415S... • Answered on Oct 13, 2008 • 338 views
0helpful
1answer

My kenwood 700w has stopped working. There is no response at all when I press the starter button.

It really depends on whether it is a Kenwood 700W stick blender or a Kenwood 700watt car audio amplifier (the category you posted to) Stick Blender, you just buy another. Car audio, you take to a Kenwood service centre after first checking the inline fuse and car fuses. 'make model (what it is)' in all questions please. https://www.google.com/search?q=kenwood+700w+has+stopped+working ..
12/3/2021 10:04:01 PM • Kenwood Car... • Answered 2 days ago • 13 views
0helpful
1answer

There is no red nor white rca input on my kenwood KVT-512

Hi.. Same problem.. I went bought something called high and low converter, hooked it @the back of my OEM harman radio... Works properly screenshot_20211203_152640_com.opera.browser-town2aqw4nyk3bhnghm3rasp-6-0.jpg
12/3/2021 1:30:24 PM • Kenwood Car... • Answered 2 days ago • 23 views
0helpful
1answer

Kenwood KM 895 Power Amplifier turns on but no output

either use a multi meter to test circuits or send out for repair
11/2/2021 2:15:15 PM • Kenwood Car... • Answered on Nov 02, 2021 • 22 views
0helpful
1answer

My kenwood DDX9704S is stuck in stand by and none of the buttons work, how do i fix this?

Try unplugging for about 5 minutes then plug back in
10/26/2021 1:13:28 AM • Kenwood Car... • Answered on Oct 26, 2021 • 27 views
0helpful
1answer

Manual for kenwood kdc-x397 cd receiver

Crutchfield has a link to the PDF of the manual on the product page: https://www.crutchfield.com/S-jjS8nY8joCN/p_113KDCX397/Kenwood-Excelon-KDC-X397.html. Scroll down and look on the right hand side of the page under What's in the box. ManualsLib also have the manual here: https://www.manualslib.com/manual/557542/Kenwood-Kdc-355u.html#product-KDC-X397 . (Note: the manual covers several models. Make sure to pay attention to any specific items regarding the KDC-X397.) I hope this helps. Cindy Wells
10/23/2021 12:32:27 AM • Kenwood Car... • Answered on Oct 23, 2021 • 24 views
0helpful
1answer

I have a Kenwood HDC-MPV622 radio, I forgot the security code and I lost the remote control

Please try understandable grammar. Thank you
10/10/2021 8:25:14 PM • Kenwood Car... • Answered on Oct 10, 2021 • 29 views
0helpful
1answer

Which way to run my current setup? Help!!

Put the kickers with the xplode 1 per channel giving each sub around 450-500 watts. Make sure you select a good ground connection, use think copper wire and both connections must be tightened enough to not move. 10 gauge is good. Run think battery pos+ cable wire from your battery to your apps install spot. Have a fusible link in between the battery and amp. Dont run your speaker wire or rca amp cable with your pos+ wire or it will pick up current causing a high pitched tone. Run remote connection to blue wire on radio harness or to the fuse box ign. Label. Make sure them kickers have a tight seal, and adequate air space. Ported boxes do hit harder but i prefer all sealed myself. Face subs to back of vehicle and roll windows down 15 percent. Good Luck. Holler Back
10/3/2021 6:47:09 PM • Kenwood Car... • Answered on Oct 03, 2021 • 31 views
0helpful
1answer

I have a kenwood cd reciver and I can't turnoff standby mode

This is usually an indication that the power board has a bad component and the signal wont switch on. The problem is usually related to capacitors and unless you want to replace the whole power supply (if you can find it,) the repair is down to the individual components and it technical in nature requiring troubleshooting gear and soldering skill
9/30/2021 4:17:35 PM • Kenwood Car... • Answered on Sep 30, 2021 • 28 views
0helpful
2answers

I need a security code of keenwood dpx-MP4100 or rest tips

The best is if you try making one or try to figure it out.
9/11/2021 6:59:56 PM • Kenwood Car... • Answered on Sep 11, 2021 • 169 views
0helpful
1answer

How to change language in Kenwood lz-755 to EN, or how to reset?

Hi did you ever find the answer? I'm looking to do the same
8/12/2021 3:15:54 PM • Kenwood Car... • Answered on Aug 12, 2021 • 143 views
0helpful
1answer

Help,brand new Kenwood ddX3EX Demonstration mode active won't get out of mode. I turn it off but it won't work. Any tips

go into menu to switch out of mode
5/18/2021 11:50:16 PM • Kenwood Car... • Answered on May 18, 2021 • 24 views
0helpful
2answers

My KDC-BT272U is suddenly saying a USB drive that worked fine is unknown device. It worked until I added more songs yesterday.

Did you tried using another usb device?
5/10/2021 12:52:13 AM • Kenwood Car... • Answered on May 10, 2021 • 43 views
0helpful
1answer

I need the wiring diagram for a Kenwood Z828/UF4 stereo

Request the diagram from Kenwood.
3/23/2021 3:08:46 AM • Kenwood Car... • Answered on Mar 23, 2021 • 193 views
0helpful
1answer

Need user manual for Kenwood kvs 410 speakers, how to get one?

Request the manual from Kenwood.
3/23/2021 3:04:07 AM • Kenwood Car... • Answered on Mar 23, 2021 • 182 views
0helpful
1answer

Hello, I Have A Kenwood KDC-X817 CD RECEIVER THAT EVERYTHING WORKS BUT THE CD PLAYER I INSTALL A CD AND 3 SECONDS LATER IT COMES BACK OUT WITH ANY CD I PUT IN IT WHAT CAN BE MY PROBLEM???

Buy yourself an Optics Cleaning Disc from Walmart. It has little brushes that clean the tracking Laser and the Read Laser. Yours are dusty and the CD can't be read. https://www.walmart.ca/en/ip/Allsop-56500-CD-Laser-Lens-Cleaner/PRD7K19EOE7SKTG ..
3/10/2021 12:33:00 AM • Kenwood Car... • Answered on Mar 10, 2021 • 23 views
0helpful
1answer

Code for Kenwood DPX-044

The code is based on the serial number of the set. There are companies that will sell you the code. If it came with the vehicle as factory standard issue, the dealership will give you the code if you show them the registration document with VIN Number. Also look for a small white sticker in the glove box or the owner's manual. https://www.google.com/search?q=Code+for+Kenwood+DPX-044 ..
2/28/2021 6:35:15 PM • Kenwood Car... • Answered on Feb 28, 2021 • 28 views
0helpful
1answer

How do I unlock my Kenwood KDC 7009 receiver

Press the "Auto" button and "Track up" on the face of Radio at the same time until the four dash lines disappear. Enter the security code using your Kenwood remote. Press and hold the 1 then the 6 preset keys until the display shows the letter 'C'. Enter the Security code using your Remote
2/19/2021 2:24:29 PM • Kenwood Car... • Answered on Feb 19, 2021 • 179 views
Not finding what you are looking for?
Kenwood KDC-415S CD Player Logo

2 questions posted

Ask a Question

Usually answered in minutes!

Top Kenwood Car Audio & Video Experts

 Francisco Mauricio...
Francisco Mauricio...

Level 3 Expert

1551 Answers

The Knight
The Knight

Level 3 Expert

76823 Answers

Cindy Wells

Level 3 Expert

6395 Answers

Are you a Kenwood Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...