20 Most Recent Kenwood 107VR - Page 8 Questions & Answers

The Kenwood KR-V8070 has no digital audio inputs; it only has analog inputs. You can see the manual's diagram of the rear input/outputs starting on page 4 at ManualsLib: https://www.manualslib.com/manual/287040/Kenwood-Kr-V8070.html?page=4#manual . If you need to connect a device that doesn't have an analog audio output, you will need an analog to digital audio converter. This is one version: https://www.amazon.com/SANOXY-Analog-Digital-Converter-Adapter/dp/B005F20756 . You will need to supply all of the audio cables separately. The later KRF-V8070D does have coaxial and optical digital audio inputs. I hope this helps. Cindy Wells

Amazon com Kenwood RC 405 Car Audio Stereo Head Unit Remote Control Car... they are 16 bucks

Sometimes it is dirt that has got in the works that causes these sorts of problems. You can take the top cover off the machine and give it good clean inside. You can use Servisol Video 40 to clean it with cotton buds. But before that check that there is no damage to the mechanism first.

It would be normal practice to connect the Equaliser via the tape in and out of the amp, to the Equaliser in and out. If you are using a tape deck, then that goes into the Equaliser's sockets for tape decks. I wouldn't use the Equaliser on any of the Dolby or other coded sound modes as it could effect the signal.

Could be a setting that has been changed. Or it could be a bad connection or faulty lead.

Example of service (repair) manual for sale on eBay. https://www.ebay.com/itm/Kenwood-Service-Manual-GE-910-Graphic-Equalizer-Original-Repair-Manual-/381118869185 Kenwood Service ManualGE 910 Graphic EqualizerOriginal Repair Manual eBay

Here is as close as I can get, they don't have the exact manual but maybe you can find something close https://www.hifiengine.com/manual_library/kenwood.shtml?category=graphic-equaliser